Atomic quantum sensors are a major breakthrough in the technology of time and frequency standards as well as ultraprecise sensing and monitoring of accelerations and rotations. They apply a new kind of optics based on matter waves. Today, atomic clocks are the standard for time and frequency measurement at the highest precisions. Inertial and rotational sensors using atom interferometers have already shown similar potential for replacing state-of-the-art sensors in other fields. With Bose–Einstein condensates, also referred as atom lasers, the traditional experiments with atom interferometers can be greatly improved. Testing of fundamental principles, studies of atomic properties, applications as inertial sensors, and measurements of fundamental constants can benefit from the brightness (intensity and small momentum spread) of these coherent sources. In addition, the coherence properties of condensates may allow BEC-based atom interferometers to approach the Heisenberg detection limit. This corresponds to a measurement precision which scales like 1/N for N atoms and not like [Formula: see text] as for independent measurements on N atoms. We present here the recent progress toward the acheivement of new coherent atomic sources, i.e. atom lasers, that will be use in space-based atom interferometers. We introduce new concepts of atom accelerometers and gyrometers that take advantage of the high collimation and coherence properties of atoms lasers and report on the development of a 0-g coherent atom interferometer (ICE) that will be used to test the ultimate performances of atom accelerometers in space.
Atomic quantum sensors are a major breakthrough in the technology of time and frequency standards as well as ultraprecise sensing and monitoring of accelerations and rotations. They apply a new kind of optics based on matter waves. Today, atomic clocks are the standard for time and frequency measurement at the highest precisions. Inertial and rotational sensors using atom interferometers have already shown similar potential for replacing state-of-the-art sensors in other fields. With Bose–Einstein condensates, also referred as atom lasers, the traditional experiments with atom interferometers can be greatly improved. Testing of fundamental principles, studies of atomic properties, applications as inertial sensors, and measurements of fundamental constants can benefit from the brightness (intensity and small momentum spread) of these coherent sources. In addition, the coherence properties of condensates may allow BEC-based atom interferometers to approach the Heisenberg detection limit. This corresponds to a measurement precision which scales like 1/N for N atoms and not like [Formula: see text] as for independent measurements on N atoms. We present here the recent progress toward the acheivement of new coherent atomic sources, i.e. atom lasers, that will be use in space-based atom interferometers. We introduce new concepts of atom accelerometers and gyrometers that take advantage of the high collimation and coherence properties of atoms lasers and report on the development of a 0-g coherent atom interferometer (ICE) that will be used to test the ultimate performances of atom accelerometers in space.
Atomic quantum sensors are a major breakthrough in the technology of time and frequency standards as well as ultra-precise sensing and monitoring of accelerations and rotations. They apply a new kind of optics based on matter waves. Today, atomic clocks are the standard for time and frequency measurement at the highest precisions. Inertial and rotational sensors using atom interferometers have already shown similar potential for replacing state-of-the-art sensors in other fields. With Bose-Einstein condensates, also refered as atom lasers, the traditional experiments with atom interferometers can be greatly improved. Testing of fundamental principles, studies of atomic properties, applications as inertial sensors, and measurements of fundamental constants can benefit from the brightness (intensity and small momentum spread) of these coherent sources. In addition, the coherence properties of condensates may also allow BEC based atom interferometers to approach the Heisenberg detection limit. This corresponds to a measurement precision which scales like 1/N for N atoms and not like 1 / N as for independent measurements on N atoms.
Recent laboratory experiments have demonstrated atom interference-based inertial force sensors operating at sensitivities near or exceeding the state-of-the-art [2x10-10 rad/sec/Hz1/2 (gyroscope), 10-9 g/Hz1/2 (accelerometer), and 10 E/Hz1/2 (gravity gradient, 1 E = 10-9 sec-2)]. Drawing on this recent experience, we seek to develop gravity gradient sensors which will provide unprecedented capabilities for navigation and geodesy applications. Our technical approach does not rely on cryogenic techniques, and should yield an instrument capable of operating on a broad array of platforms (eg. satellite, space station, plane, etc.). In the long run, we expect these instruments to be economical and robust The demonstration of Bose-Einstein condensation in dilute atomic vapors raises the prospect of a new class of de Broglie wave interferometric sensors. We have recently demonstrated a proof-of-principle accelerometer concept which exploits the novel coherence properties of Bose-Einstein condensed atomic sources.
Atom interferometry represents a quantum leap in the technology for the ultra-precise monitoring of accelerations and rotations and, therefore, for all the science that relies on the latter quantities. These sensors evolved from a new kind of optics based on matter-waves rather than light-waves and might result in an advancement of the fundamental detection limits by several orders of magnitude. Matter-wave optics is still a young, but rapidly progressing science. The Space Atom Interferometer project (SAI), funded by the European Space Agency, in a multi-pronged approach aims to investigate both experimentally and theoretically the various aspects of placing atom interferometers in space: the equipment needs, the realistically expected performance limits and potential scientific applications in a micro-gravity environment considering all aspects of quantum, relativistic and metrological sciences. A drop-tower compatible prototype of a single-axis atom interferometry accelerometer is under construction. At the same time the team is studying new schemes, e.g. based on degenerate quantum gases as source for the interferometer. A drop-tower compatible atom interferometry acceleration sensor prototype has been designed, and the manufacturing of its subsystems has been started. A compact modular laser system for cooling and trapping rubidium atoms has been assembled. A compact Raman laser module, featuring outstandingly low phase noise, has been realized. Possible schemes to implement coherent atomic sources in the atom interferometer have been experimentally demonstrated.
Matter-wave interferometers show great a potential for improving inertial sensing. The absence of drifts recommends them for a variety of applications in geodesy, navigation, or fundamental physics. Here, ultracold atomic ensembles, featuring a velocity distribution well below the photon recoil velocity, open up new perspectives. In contrast to standard laser cooling methods, they allow to reach better beam-splitting efficiencies and, hence, a higher contrast as well as to reduce systematic uncertainties and biases. Presently, Bose-Einstein condensates (BECs) provide the means to achieve the lowest expansion energies of few picokelvin. Indeed, the momentum distribution of a BEC can be further narrowed after reaching the regime of ballistic expansion, where all mean field energy is converted to kinetic energy, by the application of the delta-kick collimation technique. With such ensembles, Bragg processes can be driven with an efficiency of above 95% as well as Bloch oscillations performed without large atomic losses or dephasing. Both enable efficient large momentum transfer in interferometers to enhance their sensitivity for inertial effects. In a so-called twin-lattice atom interferometers more than thousand photon recoils are used to form compact but sensitive atom interferometers. These methods not only bring in reach extremely accurate gravimeters and accelerometers but also gyroscopes. Like the Sagnac effect in ring laser or fiber gyroscopes, the sensitivity of atom interferometers to rotations increases with the space-time area enclosed by the interferometer. In the case of light interferometers, the latter can be enlarged by forming multiple fiber loops. However, the equivalent for matter-wave interferometers remains an experimental challenge. An atom interferometer with scalable area may be formed in a twin lattice combined with a relaunch mechanism to obtain multi loops as well. Due to this scalability, it offers the perspective of reaching unprecedented sensitivities for rotations in comparably compact sensor head setups. Moreover, atom-chip technologies offer the possibility to generate a BEC and perform delta-kick collimation in a fast and reliable away, paving the way for field-deployable miniaturized atomic devices. Last but not least, the extremely low expansion energies of BECs open up to extend the time atoms spend in the interferometer to tens of seconds. This brings in reach unprecedented sensitivities in space-borne applications such as satellite geodesy.
Abstract Quantum sensors based on light pulse atom interferometers allow for measurements of inertial and electromagnetic forces such as the accurate determination of fundamental constants as the fine structure constant or testing foundational laws of modern physics as the equivalence principle. These schemes unfold their full performance when large interrogation times and/or large momentum transfer can be implemented. In this article, we demonstrate how interferometry can benefit from the use of Bose–Einstein condensed sources when the state of the art is challenged. We contrast systematic and statistical effects induced by Bose–Einstein condensed sources with thermal sources in three exemplary science cases of Earth- and space-based sensors. Graphic abstract
Atom interferometry has hugely benefitted from advances made in cold atom physics over the past twenty years, and ultra-precise quantum sensors are now available for a wide range of applications [1]. In particular, cold atom interferometers have shown excellent performances in the field of acceleration and rotation measurements [2,3], and are foreseen as promising candidates for navigation, geophysics, geo-prospecting and tests of fundamental physics such as the Universality of Free Fall (UFF). In order to carry out a test of the UFF with atoms as test masses, one needs to compare precisely the accelerations of two atoms with different masses as they fall in the Earth’s gravitational field. The sensitivity of atom interferometers scales like the square of the time during which the atoms are in free fall, and on ground this interrogation time is limited by the size of the experimental setup to a fraction of a second. Sending an atom interferometer in space would allow for several seconds of excellent free-fall conditions, and tests of the UFF could be carried out with precisions as low as 10-15 [4]. However, cold atoms experiments rely on complex laser systems, which are needed to cool down and manipulate the atoms, and these systems are usually very sensitive to temperature fluctuations and vibrations. In addition, when operating an inertial sensor, vibrations are a major issue, as they deteriorate the performances of the instrument. This is why cold atom interferometers are usually used in ground based facilities, which provide stable enough environments. In order to carry out airborne or space-borne measurements, one has to design an instrument which is both compact and stable, and such that vibrations induced by the platform will not deteriorate the sensitivity of the sensor. We report on the operation of an atom interferometer on board a plane carrying out parabolic flights (Airbus A300 Zero-G, operated by Novespace). We have constructed a compact and stable laser setup, which is well suited for onboard applications. Our goal is to implement a dual-species Rb-K atom interferometer in order to carry out a test of the UFF in the plane. In this perspective, we are designing a dual-wavelength laser source, which will enable us to cool down and coherently manipulate the quantum states of both atoms. We have successfully tested a preliminary version of the source and obtained a double species magneto-optical trap (MOT).