Two theorems on the group velocity are presented in this paper. First a simple proof is given that for any dispersive dielectric, there must be a frequency at which the group velocity of an electromagnetic pulse becomes abnormal, i.e., greater than the vacuum speed of light, infinite, or negative. Second, at the frequency at which the attenuation (or gain) is a maximum, the group velocity must be abnormal (or normal). This second theorem is more widely applicable, e.g., to propagation in waveguides or through multilayer dielectrics. To illustrate these theorems we discuss dispersion in a medium with two resonance lines, one absorption and the other gain. We find that the group velocity is abnormal within the absorption line and in a transparent region outside the gain line.
Two theorems on the group velocity are presented in this paper. First a simple proof is given that for any dispersive dielectric, there must be a frequency at which the group velocity of an electromagnetic pulse becomes abnormal, i.e., greater than the vacuum speed of light, infinite, or negative. Second, at the frequency at which the attenuation (or gain) is a maximum, the group velocity must be abnormal (or normal). This second theorem is more widely applicable, e.g., to propagation in waveguides or through multilayer dielectrics. To illustrate these theorems we discuss dispersion in a medium with two resonance lines, one absorption and the other gain. We find that the group velocity is abnormal within the absorption line and in a transparent region outside the gain line.
Recently,there has been interest in modifying the group velocity of optical pulses,resulting in stopped,slow,and fast(superluminal)light.According to the physical theory,fast appears in the anomalous medium,and then it so called light medium.There are many experimeuts to produce fast light,this situation opens up new perspectives for the so called dispersion engineering.For example,signal propagating with a group velocity that exceeds the speed of light in vacuum(c) is intriguing for scientists.And then,the traveling of short wave pulses,microwave pulses and light pulses with group velocity vg,whose values exceed infinity,so called negative group velocity(NGV) propagation.Such circumstance occurs when the peak of a pulse traveling through DUT,exits before the peak of the input pulse has reached the beginning of DUT.This effect is counterintuitive,but it is a discover under the experimental basis.When the group velocity of light in a material is negative,it is the NGV medium. Although NGV are possible particularly in gain systems,there have been some experimental demonstrations of that phenomenon in passive systems,such as the coaxial cables,waveguides,micro-strip lines,and optical fibers,etc.If the experimental configuration used with a higher impedance mismatch,then it permits larger group delays,and a corresponding NGV.If n is the effective refraction index of the medium,we wantfn |f/ndn/df|1 to obtain the NGV. Many experiments showed the group velocity can surpass the light speed c,but scientists still lack the further understanding of the results.In 2001,Scientists obtained the formula v-e=|T|2vg,where v-e is average energy velocity,T is transmission coeficient of the system.If we want v-ec,the condition is vgc|T|-2.Hence it can be concluded that only vg/c is very large,the energy velocity can surpass c.This demonstration opens the door to interesting possibilities. The definition of signal velocity by Brillouin,mathemalical meaning exceeds physical meaning.We argue that undistorted wave group(wave packet) propagation are the first consideration.According to this viewpoint,the theoretical analysis show that superluminal propagation(i.e.superluminal communication) was observed by authors of many NGV researchers.……The superluminal group velocity wave propagation,the negative group velocity wave propagation——each of the two cases has its own use.Now,scientists do research works in these fields: such as optical communication,squeezed light and quantum entanglement.The condusion tell us that,a hight efficiency and low-loss fast light scheme may explore potential applications.
The mechanisms leading to a seemingly superluminal propagation of light in dispersive media are examined. The anomalous dispersion near an absorption line, involved in the first experiments displaying negative group velocity propagation, is shown to be not only simpler but also more efficient than the so-called transparent dispersion used in the later experiments of Wang et al. (Nature (London) 406, 277 (2000)) and of Dogariu et al. (Phys.Rev.A 63, 053806 (2001)). The modest pulse advances observed by these authors can in particular be reproduced with a better overall transmittance of the medium and the significant advances attained with a single-line arrangement would probably be unattainable with their gain-doublet arrangement.
The existence of anomalous, i.e. superluminal or negative, group velocities [1] provides one of the most amazing phenomenon of wave propagation which is compatible with, and even a consequence of, causality [2]. Anomalous wave propagation generally relies on the resonant interaction of light with an atomic medium, i.e. it exploits the dispersive properties of absorptive [3] or inverted [4,5] atomic media near resonances. Evanescent wave propagation across photonic barriers [1] provides the other wide framework where anomalous group velocities have been observed, however in such cases the achievement of a negative group velocity seems unlikely. By exploiting the dispersive properties of a gain doublet, a narrow spectral region of transparent anomalous dispersion around the dip center of two Lorentzian gain lines, leading to negative transit times and no pulse attenuation, can be created [4]. A recent demonstration thereof has been indeed reported in an experiment by Wang and coworkers using Cs vapor [5].
Energy exchange between an electromagnetic pulse and dispersive media may result in complicated, yet interesting, phenomena in which the group velocity becomes abnormal (i.e., superluminal or negative). For such cases, signal velocity (velocity of detectable information) remains debatable. In this chapter, we present a systematic study that can be applied to pulse propagation in any dispersive medium in order to quantify the detectable information content and calculate its speed, while accounting for pulse reshaping effects and noise generated in the medium and the detector. Accordingly, we present an operational context within which the constraints of superluminal signaling and its potential applications are shown. We provide scenarios in which the signal velocity is evaluated in microwave circuits with negative group delays and extend the method to include optical pulses in inverted media as well. Such analysis explores the fundamental limitations and capabilities of a broad range of superluminal signaling applications.
It is shown that there are no dispersing media with «subluminal only» or «superluminal only» real group velocity – if in some medium at some frequencies the real group velocity is subluminal, then in the same medium there are necessarily frequencies at which the real group velocity is superluminal. Conversely, if a medium has frequencies with a superluminal group velocity, then it necessarily has frequencies with a subluminal group velocity. In other words, there is a necessary connection between subluminal and superluminal group velocity – if any medium is capable of generating subluminal group velocity, then the same medium is capable of generating superluminal group velocity. Similarly, there are no media with «only positive» or «only negative» imaginary part of the complex group velocity – if at some frequencies the imaginary part of the group velocity is positive, then at other frequencies in the same medium it is negative and vice versa. This means that if there is a carrier frequency in the medium at which some linearly frequency-modulated signal propagates at a speed lower than the group speed, then in the same medium there is necessarily a carrier frequency at which the same signal will propagate at a speed higher than the group speed and vice versa.