There has always been a significant interest in using optical systems to control quantum phenomena. A major barrier to controllability of quantum optical systems is the fact that the systems are usually innite dimensional open systems, two cases which have mostly negative controllability results. This thesis develops three new definitions of controllability and reformulates a previous controllability theorem in order to apply the theorem to the system of interest. Then, the controllability of a pumped dissipative quantum optical cavity with engineered decoherence is investigated using previously developed concepts in quantum control theory, as well as the ones developed in this thesis. Positive controllability results were found for Finite Ensemble Population Controllability and Weak Observable Controllability, while Finite Density Matrix Controllability had a negative result. A result for Strong Observable controllability remains elusive, as the normal nonlinear controllability theorems are not applicable to the system.
There has always been a significant interest in using optical systems to control quantum phenomena. A major barrier to controllability of quantum optical systems is the fact that the systems are usually innite dimensional open systems, two cases which have mostly negative controllability results. This thesis develops three new definitions of controllability and reformulates a previous controllability theorem in order to apply the theorem to the system of interest. Then, the controllability of a pumped dissipative quantum optical cavity with engineered decoherence is investigated using previously developed concepts in quantum control theory, as well as the ones developed in this thesis. Positive controllability results were found for Finite Ensemble Population Controllability and Weak Observable Controllability, while Finite Density Matrix Controllability had a negative result. A result for Strong Observable controllability remains elusive, as the normal nonlinear controllability theorems are not applicable to the system.
Known as decoherence, the unavoidable interaction of a quantum system with its surrounding environment is usually considered to be detrimental for quantum information processing. In this thesis the coherent, open loop control of such open systems is studied. Concepts from quantum control theory and the theory of open quantum system are adopted in order to fight decoherence and implement quantum gates in a noiseless manner. In particular, Lie algebraic methods and numerical optimization tools are used to investigate the control properties of a single spin interacting with a spin environment. We show that, independent of the size of the environment, every unitary transformation can be implemented on the system spin through a single control field. We proceed by investigating dynamical decoupling, a method to suppress the interactions with the environment, for finite- and for in- finite dimensional systems. We prove that every finite dimensional system can be protected from decoherence, even if the environment is infinite dimensional, whereas for noise described by a Lindblad master equation dynamical decoupling will never succeed. This will lead to a new method to distinguish decoherence from intrinsic noise terms. We further prove that not every infinite dimensional system can be protected from decoherence through dynamical decoupling. Afterwards we investigate dynamical decoupling of systems that are described by quadratic Hamiltonians, showing that such interactions can always be suppressed with two simple operations. In the last part we investigate the coherent control of a Lindblad master equation. We show that a strong noise process exhibiting a decoherence free subspace can substantially increase the number of unitary operations that can be implemented, allowing us to fully control parts of the system. Afterwards we develop a scheme to make Hamiltonians and Lindbladians commutative by adding an auxiliary system. The old, possibly non-commutative dynamics, is recovered through a non-selective measurement.
Quantum opto-mechanics is a fast moving, broad research field which aims to investigate and control the interaction of light and the quantized motion of mechanical objects and the coupling between them. This allows one to engineer the mechanical quantum state by controlling and measuring the electromagnetic field, and conversely, to control the dynamical evolution of the optical field via its interaction with a mechanical system. Mechanical resonators are accessible in many different shapes and sizes, from kilogram scales in experiments that test gravitational theories to micro- and nano-scales in resolved sideband regime, where the frequency of the mechanical resonator is larger than the bandwidth of the optical cavity. In this regime, it is possible to cool the mechanical object to the ground state which allows a high degree of control and the ability to prepare interesting non-classical states, states that could aid in investigating the quantum dynamics of macroscopic objects. The field of quantum opto-mechanics is a promising testbed for quantum control technologies, such as fundamental tests of quantum mechanics, ultra-sensitive quantum sensors for precise measurements, phonon lasing, mechanical memories with long lifetime and quantum information processing. Furthermore, experiments are progressing toward strong opto-mechanical coupling regimes with single photons. This creates a platform that can take advantage of the nonlinear optical interactions to generate highly non-classical states in such light-matter interfaces. Photonic systems working in the single photon regime will be promising for low power applications and also for implementations of quantum information and computation. Motivated by these applications, this thesis consists of theoretical studies in the context of single photonics. This includes investigating non-classical mechanical state generation and mechanically controlling the dynamical evolution of optical fields in the strong coupling regime single photon opto-mechanics and furthermore, proposing a quantum sensor using single photonics. In this regard, we employ three important formalisms to treat and measure open quantum systems with non-Gaussian input fields: the conditional and unconditional cascaded master equations, Fock-state master equations and input-output Langevin equations. In the context of opto-mechanics, the system to be investigated is composed of two optical cavities with a coupling modulated via a mechanical resonator. In one case, a sequence of single photons are irreversibly sent to one of the optical cavities. After photons go through the opto-mechanical interaction, photon counting measurements are performed on the cavity output, conditionally steering the mechanical state to a highly non-classical Fock state. Numerical calculations are performed to predict the experimental parameters needed to generate a mechanical Fock state before the mechanical object is thermalized. In another case, the same opto-mechanical scheme is employed to conversely modify the state of the optical mode by engineering the state of the mechanical degree of freedom. In this case, it is shown that the opto-mechanical system operates as an effective beam splitter for the input single photons, with a transmission that can be controlled by tuning the number of excitations in the bulk mechanical resonator. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, it acts as a classical control for the input photons. Finally, we propose a novel multi-purpose sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an effective beam splitter. This sensor is based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We propose that this generic scheme could be implemented with coupled L3 photonic crystal cavities and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as 10-7 Newtons and can measure one part per million change in refractive index using a very low input power of 10-10 W.
We investigate coherence in one- and two-photon optical systems, both theoretically and experimentally. In the first case, we develop the density operator representing a single photon state subjected to a non-dissipative coupling between observed (polarization) and unobserved (frequency) degrees of freedom. We show that an implementation of ``bang-bang'' quantum control protects photon polarization information from certain types of decoherence. In the second case, we investigate the existence of a "decoherence-free" subspace of the Hilbert space of two-photon polarization states under the action of a similar coupling. The density operator representation is developed analytically and solutions are obtained numerically. NOTE: This manuscript is taken from the author's undergraduate thesis (A.B. Dartmouth College, June 2000, advised by Dr. Walter E. Lawrence), under the supervision of Dr. Paul G. Kwiat.
Accurate control of a quantum system is complicated to achieve partly due to the system being coupled to its surrounding environment. The coupling induces dissipation and decoherence not only destroying the coherent quantum state but making the application of control unpredictable. When the control results from manipulation of external fields, it is usually referred to as driving and its joint effect with decoherence constitutes an active field of study in reduced-density-operator theory. Recently, this field has been pushed forward by its necessity in simulating Cooper pair pumping where the geometric nature of quantum evolution allows for controlled transport of charge carriers in superconducting circuits. Such circuits themselves are under constant investigation as they grant access to fundamental quantum phenomena and facilitate promising applications such as those in quantum information processing.\nIn this dissertation, driven quantum systems under decoherence are investigated. Extensions and improvements to a recent master equation for nearly adiabatic driving are presented and analyzed. The emergent properties in quantum evolution are studied both analytically and numerically. Related to the findings, a general conservation law of operator current is derived and used to explain observed nonconservation in previous theoretical studies. The derived theory is applied to Cooper-pair pumping and shown to lead to important properties such as superadiabatic ground-state pumping. A recent pumping experiment is simulated and the breakdown point for ideal pumping is found with feasible physical parameters. A study of charge transport in the presence of flux noise is presented leading to detectable dissipative currents and the typical description of the device used for pumping is extended to include a nonvanishing loop inductance.\nA novel approach to implement control of quantum systems is proposed based on constructing a tunable coupling to an artificial environment using either a coplanar waveguide cavity or coupled quantum LC resonators. Tunability allowing for both efficient initialization and protected evolution is theoretically demonstrated. Finally, a general framework for quantum driving is constructed without the typical assumption of a classical driving force leading to peculiar results.\nThis dissertation presents original research on both modeling the control of open quantum systems as well as the realization of such control. The work simulates physical phenomena in superconducting circuits and makes predictions for future experiments. In addition, it introduces novel theoretical tools and approaches that advance the state of the art.
Since no physical system can ever be completely isolated from its environment, the study of open quantum systems is pivotal to reliably and accurately control complex quantum systems. In practice, reliability of the control field needs to be confirmed via certification of the target evolution while accuracy requires the derivation of high-fidelity control schemes in the presence of decoherence. In the first part of this thesis an algebraic framework is presented that allows to determine the minimal requirements on the unique characterisation of arbitrary unitary gates in open quantum systems, independent on the particular physical implementation of the employed quantum device. To this end, a set of theorems is devised that can be used to assess whether a given set of input states on a quantum channel is sufficient to judge whether a desired unitary gate is realised. This allows to determine the minimal input for such a task, which proves to be, quite remarkably, independent of system size. These results allow to elucidate the fundamental limits regarding certification and tomography of open quantum systems. The combination of these insights with state-of-the-art Monte Carlo process certification techniques permits a significant improvement of the scaling when certifying arbitrary unitary gates. This improvement is not only restricted to quantum information devices where the basic information carrier is the qubit but it also extends to systems where the fundamental informational entities can be of arbitary dimensionality, the so-called qudits. The second part of this thesis concerns the impact of these findings from the point of view of Optimal Control Theory (OCT). OCT for quantum systems utilises concepts from engineering such as feedback and optimisation to engineer constructive and destructive interferences in order to steer a physical process in a desired direction. It turns out that the aforementioned mathematical findings allow to deduce novel optimisation functionals that significantly reduce not only the required memory for numerical control algorithms but also the total CPU time required to obtain a certain fidelity for the optimised process. The thesis concludes by discussing two problems of fundamental interest in quantum information processing from the point of view of optimal control the preparation of pure states and the implementation of unitary gates in open quantum systems. For both cases specific physical examples are considered: for the former the vibrational cooling of molecules via optical pumping and for the latter a superconducting phase qudit implementation. In particular, it is illustrated how features of the environment can be exploited to reach the desired targets.
Controlling the dynamics of open quantum systems; i.e. quantum systems that decohere because of interactions with the environment, is an active area of research with many applications in quantum optics and quantum computation. My thesis expands the scope of this inquiry by seeking to control open systems in proximity to an additional system. The latter could be a classical system such as metal nanoparticles, or a quantum system such as a cluster of similar atoms. By modelling the interactions between the systems, we are able to expand the accessible state space of the quantum system in question.For a single, three-level quantum system, I examine isolated systems that have only normal spontaneous emission. I then show that intensity-intensity correlation spectra, which depend directly on the density matrix of the system, can be used detect whether transitions share a common energy level. This detection is possible due to the presence of quantum interference effects between two transitions if they are connected. This effect allows one to asses energy level structure diagrams in complex atoms/molecules. By placing an open quantum system near a nanoparticle dimer, I show that the spontaneous emission rate of the system can be changed ``on demand" by changing the polarization of an incident, driving field. In a three-level, Λ system, this allows a qubit to both retain high qubit fidelity when it is operating, and to be rapidly initialized to a pure state once it is rendered unusable by decoherence. This type of behaviour is not possible in a single open quantum system; therefore adding a classical system nearby extends the overall control space of the quantum system. An open quantum system near identical neighbours in a dense ensemble is another example of how the accessible state space can be expanded. I show that a dense ensemble of atoms rapidly becomes disordered with states that are not directly excited by an incident field becoming significantly populated. This effect motivates the need for using multi-directional basis sets in theoretical analysis of dense quantum systems. My results demonstrate the shortcomings of short-pulse techniques used in many recent studies. Based on my numerical studies, I hypothesize that the dense ensemble can be modelled by an effective single quantum system that has a decoherence rate that changes over time. My effective single particle model provides a way in which computational time can be reduced, and also a model in which the underlying physical processes involved in the system's evolution are much easier to understand. I then use this model to provide an elegant theoretical explanation for an unusual experimental result called ``transverse optical magnetism''. My effective single particle model's predictions match very well with experimental data.