This thesis presents research on the initialization, control, and readout of electron spin states in gate defined GaAs quantum dots. The first three experiments were performed with Singlet-Triplet spin qubits in double quantum dots, while the remaining two experiments were performed with an Exchange-Only spin qubit in a triple quantum dot.
This thesis presents research on the initialization, control, and readout of electron spin states in gate defined GaAs quantum dots. The first three experiments were performed with Singlet-Triplet spin qubits in double quantum dots, while the remaining two experiments were performed with an Exchange-Only spin qubit in a triple quantum dot.
A two-level quantum system is the building block of a quantum computer. This pair of quantum states defines the computational unit of a quantum computer, and it is called a quantum bit or qubit in analogy to the bit that is the binary unit of a classical computer. The spin of a single electron naturally defines such a two-level quantum system. A quantum dot can be tuned to the single-electron regime, and an array of singly occupied quantum dots provides a multi-qubit register. This thesis describes the multielectron encoding of a spin qubit using a pair or a trio of quantum dots, and it analyzes the coherence properties and manipulation protocols of this system. The singlet-triplet qubit, coded using the singlet state and the spinless triplet state of a pair of singly occupied quantum dots, can be controlled all electrically when applying voltages to gates close to the quantum dot structure. Rapid, subnanosecond modifications of the double quantum dot's charge configuration have been realized successfully. A small magnetic field gradient across the double quantum dot enables universal qubit control. Two modifications of the normal singlet-triplet encoding are introduced. (1) The six-electron configuration of a double quantum dot encodes a singlet-triplet qubit in the same way as for the two-electron double quantum dot. Two electrons at each quantum dot are irrelevant for the qubit manipulations because they are paired in a singlet state; the remaining two electrons encode the qubit. The qubit's wave function is immune to charge noise at moderate out-of-plane magnetic fields. (2) A singlet-triplet qubit encoded using two quantum dots of different sizes has an orbital state degeneracy of the singlet state and the spinless triplet state at finite out-of-plane magnetic fields. Spin-orbit interactions lift this state degeneracy, while the magnitude of the state coupling is determined by the size difference of the QDs. This setup enables the manipulations of singlet-triplet qubits without the need for magnetic field gradients. Finally, two-qubit gates between singlet-triplet qubits are proposed that use mediated exchange interactions via one quantum state. These operations are well controlled and highly noise insensitive. Orbital interactions alone can control spin qubits coded in a three electron Hilbert space. For example, the exchange-only qubit is encoded using three singly occupied quantum dots. The exchange interactions of two quantum dot pairs need to be modified to manipulate this qubit. The noise sensitivity of the exchange-only qubit is discussed. Alternatively, a three-electron qubit at a double quantum dot can be operated when single electrons are transferred between the quantum dots. Fast, subnanosecond manipulations of the double quantum dot's charge configuration are required to realize single-qubit gates. A novel two-qubit pulse gate for the three-electron double quantum dot qubit is proposed.
This thesis addresses the concept of quantum computing with semiconductor quantum dots. The basic unit of a quantum computer is a quantum mechanical two-level system, the so-called quantum bit (qubit). The qubit can be defined as the spin of an electron confined in a quantum dot or as a two-dimensional subspace of the Hilbert space for several spins. Some semiconductors have several minima in their conduction band, socalled valleys. A two-dimensional valley degree of freedom can also be considered as a qubit. In this thesis, quantum registers storing spin as well as valley qubits are described theoretically. Virtual hopping yields an exchange interaction between neighboring quantum dots, which reduces the energy of antisymmetric spin-valley states according to the Pauli principle. Considering the spin and the valley degrees of freedom of two electrons in neighboring quantum dots as qubits, the exchange interaction is a four-qubit interaction. In this thesis, it will be shown that it is, nevertheless, possible to generate a universal two-qubit gate for spin qubits or for valley qubits by combining the exchange interaction and individual single-qubit gates. The exchange interaction in this two-electron double quantum dot directly provides a universal two-qubit gate for one spin and one valley qubit as well. For this, the qubits are defined as suitable subspaces, spanned by the singlet and one triplet state of the spin and the valley states, respectively, Using those gates, arbitrary quantum operations can be performed for single-spin and single-valley qubits in the same quantum register, where in one double quantum dot the quantum states are restricted to the singlet-triplet subspace. While in this register single-spin and single-valley rotations are required, these gates are dispensable in a quantum register storing spin and valley singlet-triplet qubits. The single-qubit operations, in this case, can be provided by the exchange interaction and a gradient in the energy splitting of spin and valley states when the spin qubit is stored in a double quantum dot with spin degrees of freedom only and when the spin states in the double quantum dot which stores the valley qubit are polarized. For providing the two-qubit gate, the spin and the valley qubits need to be stored in the same double quantum dot. The crucial task for this register is to interchange the spin of a spin-only and a spin-valley quantum dot in order to switch between the single-qubit and the two-qubit operation mode. This interchanging of the spin can be achieved by a valley-depending virtual hopping between the quantum dots. Furthermore, echo sequences for a so-called exchange-only qubit are considered. An exchange-only qubit is defined as a subspace in a system of three electron spins in a triple quantum dot. An inhomogeneous magnetic field, which may be caused by nuclear spins in the semiconductor, can lead to decoherence and leakage, i.e., the state might leave the qubit subspace. Suppressing this effect by an echo sequence which consists of pulses interchanging neighboring spin states, so-called SWAP gates, was proposed. Controllability over these quantum operations is provided via the exchange interaction. In this thesis, the performance of different such sequences is investigated. The analysis shows that optimization strategies developed for single spin echoes can be adapted for the three spin system. The echo sequences can be different in their order of applied SWAP gates interchanging the spins in the first and second dots or in the second and third dots. The noise suppression performance depends slightly on this order of SWAP gates. For two spins in a double quantum dot a scheme for quantum state tomography is presented. The corresponding measurement operators are constructed from a set of mutually unbiased bases of the four-dimensional two-qubit Hilbert space. These measurements are represented by short sequences of no more than three elementary quantum gates and projective measurements by the well-established spin-to-charge conversion.
Spin qubits in semiconductor quantum circuits have been identified as a compelling platform for large scale quantum computing. Today an ongoing effort of the community is aiming at the scaling of such systems by filling larger and larger arrays. In this context the development of tuning and readout protocols allowing to reduce the inherent complexity of such systems seems to be a necessity.In the first part of my thesis, I demonstrate array partitioning of a linear triple quantum dot defined in a AlGaAs/GaAs heterostructure via a highly tunable interdot tunnel coupling. This allows us to operate independently smaller sections of the array which reduces the number of available charge states for the system and therefore reduces its complexity during the tuning.The second part of my thesis is focused on reducing the hardware overhead necessary to extract information during the readout of the spin qubits. In semiconductor spin qubits, high fidelity read-out is obtained through Pauli spin blockade in a double quantum dot with two electrons probed by a local electrometer. One electron is the qubit, the second is the ancilla and only one bit of information is extracted. To obtain the full two-bit information of the two-electron spin states, more quantum hardware is necessary (either dots, electrometers, or reservoirs).Based on an original protocol, I develop in this thesis a complete single-shot read-out procedure for two-electron spin states in a double quantum dot discriminating between S, T0, T+ and T-. It uses successively three distinct spin-to-charge conversion protocols interleaved with charge configuration measurements. The strategy is based on four novel experimental achievements:First, the control from the GHz to sub-Hz regime of the interdot tunnel coupling at the nanosecond timescale.Second, the separation of the spin-to-charge conversion and the charge read-out in the voltage gate space.Third, the suppression of spin relaxation process during the read-out procedure.Finally, the repetition of three distinct spin-to-charge conversion protocols.The read-out procedure is tested on various initialized populations and implemented in more complex spin manipulation sequences to assess its validity.
Exchange-coupled singlet-triplet spin qubits in two gate-defined double quantum dots are considered theoretically. Using charge density operators to describe the double-dot orbital states, we calculate the Coulomb couplings between the qubits and identify optimal bias points for single- and two-qubit operations, as well as convenient idle positions. The same intuitive formulation is used to derive dephasing rates of these qubits due to the fluctuating charge environment, thereby providing the main considerations for a quantum computation architecture that is within current experimental capabilities.
We consider a double quantum dot (DQD) qubit which contains six electrons instead of the usual one or two. In this spin qubit, quantum information is encoded in a low-lying singlet-triplet space much as in the case of a two-electron DQD qubit. We find that initialization, manipulation, and readout can be performed similarly to the two-electron case, and that energy gaps remain large enough that these operations can be performed robustly. We consider DQD potentials with parameters chosen to be representative of current experimental capabilities. Results are obtained using two complementary full configuration interaction methods.
The triple quantum dot energy level spectrum is far more complex than its double quantum dot counterpart. As a result it is a challenge to cleanly manipulate only the two required qubit states without invoking more complex multistate coherent evolution. In this talk I will describe experiments and modeling of lateral triple quantum dot devices where by suitable device gate (i.e. energy level spectrum) tuning and pulse characteristics we were able to characterize and manipulate various three spin qubit species. In particular I will describe measurements where the Landau-Zener –Stuckelberg approach previously demonstrated in double dots is extended to threeinteracting spin states permitting us to demonstrate phenomena such as pairwise exchange control. I will also demonstrate how by tuning the experimental parameters one can controllably switch to coherent oscillations originating from alternative potentially useful qubit states and how to distinguish them.