ve qubit superconducting processor. Two-qubit Bell states and three-qubit GHZ-type states are generated by single and double two-qubit parity measurements on superposition states, respectively, and characterized by both witnessing and state tomography. The protocol for generation of GHZ-type states can be used as the encoding step in the three-qubit bit-ip quantum error correction code, and made deterministic by digital feedback control. We assess its performance by state tomography of the six encoded cardinal states, and compare to the traditional method of encoding by gates.
ve qubit superconducting processor. Two-qubit Bell states and three-qubit GHZ-type states are generated by single and double two-qubit parity measurements on superposition states, respectively, and characterized by both witnessing and state tomography. The protocol for generation of GHZ-type states can be used as the encoding step in the three-qubit bit-ip quantum error correction code, and made deterministic by digital feedback control. We assess its performance by state tomography of the six encoded cardinal states, and compare to the traditional method of encoding by gates.
Superconducting circuits have recently risen to the forefront of the solid-state prototypes for quantum computing. Reaching the stage of robust quantum computing requires closing the loop between measurement and control of quantum bits (qubits). This thesis presents the realization of feedback control of superconducting qubits based on projective measurement, with initial applications. The first application is a reset operation which initializes a qubit in the ground state fast and on demand. In a second experiment, we transform a cavity into a two-qubit parity meter, which is capable of generating entanglement starting from an unentangled superposition state. We then employ feedback to turn the generation of entanglement from probabilistic to deterministic, thus combining two key ingredients - parity measurement and feedback - of quantum error correction. As a third application, we transform a superconducting qubit into a charge-parity detector to investigate the limits of quasiparticle tunneling to qubit coherence. We find room for at least a tenfold increase in qubit coherence times before quasiparticles become the bottleneck. Finally, we present our latest results towards implementing the bit-flip error correction code in a five-qubit processor and discuss the role of feedback control in the future development of superconducting quantum circuits.
A quantum computer will use the properties of quantum physics to solve certain computational problems much faster than otherwise possible. One promising potential implementation is to use superconducting quantum bits in the circuit quantum electrodynamics (cQED) architecture. There, the low energy states of a nonlinear electronic oscillator are isolated and addressed as a qubit. These qubits are capacitively coupled to the modes of a microwave-frequency transmission line resonator which serves as a quantum communication bus. Microwave electrical pulses are applied to the resonator to manipulate or measure the qubit state. State control is calibrated using diagnostic sequences that expose systematic errors. Hybridization of the resonator with the qubit gives it a nonlinear response when driven strongly, useful for amplifying the measurement signal to enhance accuracy. Qubits coupled to the same bus may coherently interact with one another via the exchange of virtual photons. A two-qubit conditional phase gate mediated by this interaction can deterministically entangle its targets, and is used to generate two-qubit Bell states and three-qubit GHZ states. These three-qubit states are of particular interest because they redundantly encode quantum information. They are the basis of the quantum repetition code prototypical of more sophisticated schemes required for quantum computation. Using a three-qubit Toffoli gate, this code is demonstrated to autonomously correct either bit- or phase-flip errors. Despite observing the expected behavior, the overall fidelity is low because of decoherence. A superior implementation of cQED replaces the transmission-line resonator with a three-dimensional box mode, increasing lifetimes by an order of magnitude. In-situ qubit frequency control is enabled with control lines, which are used to fully characterize and control the system Hamiltonian.
Quantum computing holds the promise of solving problems that are intractable for classical computers, with applications ranging from optimization and materials simulation to cryptography. It achieves this by leveraging the exponentially scaling dimensionality of the space encoding quantum information and by executing algorithms on quantum registers in superposition states – a feature often referred to as quantum parallelism. However, while encoding information in computational units capable of exploring a continuous set of quantum states enables exponential scaling of computational power with system size, quantum systems are also more susceptible to errors than their classical counterparts. These errors take the form of both control errors, where miscalibration of the control pulses causes coherent errors on the qubit states, as well as incoherent errors due to energy relaxation and dephasing. Scaling quantum systems to run useful algorithms involving hundreds or thousands of logical qubits will require quantum error correction. In this approach, quantum information is redundantly encoded across an entangled state of many physical qubits. This has enabled experimental demonstrations across various platforms – including ion traps, superconducting circuits, and neutral atoms – showing that encoded quantum states can be preserved beyond the coherence times of the constituting physical qubits. However, quantum state preservation is only one component needed for scalable quantum computing. To execute algorithms, it is also necessary to implement quantum gates on and between encoded qubits, in a way that maintains fault tolerance by preserving the ability to correct errors as they occur during the computation. In the first part of this thesis, we demonstrate the implementation of an error-corrected quantum operation that entangles two logical qubits. This is achieved by performing lattice surgery on a distance-three surface code qubit, resulting in a logical Bell state encoded in distance-three repetition codes, which enable the correction of single bit-flip errors. We further introduce techniques to benchmark and characterize the performance of logical operations, including applying the protocol to arbitrary logical input states and performing logical quantum process tomography. Together, these results constitute one of the first realizations of error-corrected lattice surgery in superconducting circuits. While quantum error correction can correct errors provided they occur with sufficiently low frequency, it may fail when many qubits experience errors simultaneously. In the second part of this thesis, we therefore shift focus to a specific error mechanism known to cause correlated errors in superconducting circuits – quasiparticle-induced decoherence. In this case, various forms of energy deposition on the quantum device can break Cooper pairs into quasiparticles, which may subsequently diffuse to the tunnel junction and interact with the qubit state, thereby causing decoherence. In this thesis, we investigate the impact of quasiparticle tunneling on qubit performance, with a focus on infrared-induced quasiparticles. We compare the sensitivity of niobium-based qubits to those made from tantalum – a material that has gained interest in recent years following demonstrations of qubits with improved coherence times based on this material. Using a thermal radiator source, we show that the performance of tantalum qubits may be limited by infrared-induced quasiparticles in typical superconducting circuit experimental setups. By employing both ambient and in-line infrared filters, we investigate the effectiveness of different filtering strategies and develop best practices for engineering cryogenic environments for superconducting quantum processors. The results presented in this thesis contribute to the advancement of quantum computing based on superconducting circuits by implementing and characterizing quantum error-corrected operations, and by investigating quasiparticles as a source of decoherence, along with strategies to improve infrared filtering and signal conditioning in cryogenic environments for future fault-tolerant quantum computing.
This chapter covers the development of feedback control of superconducting qubits using projective measurement and a discrete set of conditional actions, here referred to as digital feedback. We begin with an overview of the applications of digital feedback in quantum computing. We then introduce an implementation of high-fidelity projective measurement of superconducting qubits. This development lays the ground for closed-loop control based on the binary measurement result. A first application of digital feedback control is fast and deterministic qubit reset, allowing the repeated initialization of a qubit more than an order of magnitude faster than its relaxation rate. A second application employs feedback in a multi-qubit setting to convert the generation of entanglement by parity measurement from probabilistic to deterministic, targeting an entangled state with the desired parity every time.
Quantum data are susceptible to decoherence induced by the environment and to errors in the hardware processing it. A future fault-tolerant quantum computer will use quantum error correction to actively protect against both. In the smallest error correction codes, the information in one logical qubit is encoded in a two-dimensional subspace of a larger Hilbert space of multiple physical qubits. For each code, a set of non-demolition multi-qubit measurements, termed stabilizers, can discretize and signal physical qubit errors without collapsing the encoded information. Here using a five-qubit superconducting processor, we realize the two parity measurements comprising the stabilizers of the three-qubit repetition code protecting one logical qubit from physical bit-flip errors. While increased physical qubit coherence times and shorter quantum error correction blocks are required to actively safeguard the quantum information, this demonstration is a critical step towards larger codes based on multiple parity measurements.
Quantum entanglement is one of the primary features which distinguish quantum computers from classical computers. In gate-based quantum computing, the creation of entangled states or the distribution of entanglement across a quantum processor often requires circuit depths, which grow with the number of entangled qubits. However, in teleportation-based quantum computing, one can deterministically generate entangled states with a circuit depth that is constant in the number of qubits, provided that one has access to an entangled resource state, the ability to perform mid-circuit measurements, and can rapidly transmit classical information. In this work, aided by fast classical field programmable gate array-based control hardware with a feedback latency of only 150 ns, we explore the utility of teleportation-based protocols for generating non-local, multi-partite entanglement between superconducting qubits. First, we demonstrate well-known protocols for generating Greenberger–Horne–Zeilinger states and non-local controlled-NOT gates in constant depth. Next, we utilize both protocols for implementing a quantum fan-out gate in constant depth among three non-local qubits (i.e., controlled-NOT-NOT). Finally, we demonstrate deterministic state teleportation and entanglement swapping between qubits on opposite sides of our quantum processor. Throughout this work, we find that the fidelity of our teleportation-based protocols is limited by measurement-induced dephasing on idling spectator qubits. Therefore, our work serves as a useful study of the current benefits and limitations of teleportation-based protocols on contemporary superconducting quantum processors.