Cavity quantum electrodynamics (QED) in the strong-coupling regime provides the opportunity to monitor and control the dynamics of a simple quantum system. A single Cesium atom interacts strongly with single-photon fields in the mode of a high-finesse optical cavity. When the resulting coherent coupling rate dominates dissipation in the system, strong coupling is realized and the system displays distinctively quantum behavior. The coupling between atomic internal states and the quantized cavity field allows for diverse protocols in quantum state preparation, quantum communication, and quantum logic. However, the atom's external or motional state must also be taken into account. My research develops cavity QED in the limit where the coherent atom-field coupling dominates the atomic kinetic energy and thus significantly affects the atomic center-of-mass motion. In this regime, the interaction of the atom with the cavity field provides both a means of controlling atomic motion and a signal for detecting that motion in real time with high signal-to-noise. The sensing capability of the ``atom-cavity microscope" is exploited to trap single atoms with single-photon fields and to monitor their orbits in real time as they are bound in the cavity. Such real-time position sensing is the basis for a detailed strategy and ongoing experiment to actively stabilize select aspects of an atom's motion within the cavity. As the cavity-enabled position measurement approaches the standard quantum limit, this work begins to realize a quantum servo for atomic position and to address questions of optimal state estimation and state preparation. In combination with other progress in cavity QED, it furthers the goal of controlled atom-field interactions for quantum information science.
Cavity quantum electrodynamics (QED) in the strong-coupling regime provides the opportunity to monitor and control the dynamics of a simple quantum system. A single Cesium atom interacts strongly with single-photon fields in the mode of a high-finesse optical cavity. When the resulting coherent coupling rate dominates dissipation in the system, strong coupling is realized and the system displays distinctively quantum behavior. The coupling between atomic internal states and the quantized cavity field allows for diverse protocols in quantum state preparation, quantum communication, and quantum logic. However, the atom's external or motional state must also be taken into account. My research develops cavity QED in the limit where the coherent atom-field coupling dominates the atomic kinetic energy and thus significantly affects the atomic center-of-mass motion. In this regime, the interaction of the atom with the cavity field provides both a means of controlling atomic motion and a signal for detecting that motion in real time with high signal-to-noise. The sensing capability of the ``atom-cavity microscope" is exploited to trap single atoms with single-photon fields and to monitor their orbits in real time as they are bound in the cavity. Such real-time position sensing is the basis for a detailed strategy and ongoing experiment to actively stabilize select aspects of an atom's motion within the cavity. As the cavity-enabled position measurement approaches the standard quantum limit, this work begins to realize a quantum servo for atomic position and to address questions of optimal state estimation and state preparation. In combination with other progress in cavity QED, it furthers the goal of controlled atom-field interactions for quantum information science.
Cavity quantum electrodynamics (QED), the system of a single atom interacting with a single mode of a high finesse optical resonator, has tremendous potential for use in quantum logic, quantum information processing, and in enabling observation of quantum mechanical effects in the laboratory. The work of this thesis demonstrates a number of steps toward realizing these goals, by employing an experimental system with the strongest atom-field coupling achieved to date in optical cavity QED. The effects of strong coupling in cavity QED are studied for single cold atoms measured one at a time, in real time. The passage of single atoms through the cavity is employed to map out the frequency response of the system, and to demonstrate that quantum rather than semiclassical theory provides the correct theoretical model. The mechanical effects of strong coupling on single atoms are explored, these experiments demonstrating the first trapping of single atoms with single photons. Additionally, strong coupling enables high signal-to-noise ratio for monitoring atomic position at single photon field strengths; this capability is employed to investigate the motion of atoms trapped within the cavity. The transmitted cavity field is used to reconstruct the trajectories of single atoms, thereby realizing a new form of microscopy - the Atom-Cavity Microscope. Technical developments necessary to create the cavities used in this experiment are detailed. Ideas for future extensions to the experiment are proposed; a zero light-shift dipole force trap, and measurement of photon statistics of a single strongly coupled atom (which realizes a photon blockade device) are discussed.
Cavity quantum electrodynamics (cavity QED) describes electromagnetic fields in a confined space and the radiative properties of atoms in such fields. The simplest example of such system is a single atom interacting with one mode of a high-finesse resonator. Besides observation and exploration of fundamental quantum mechanical effects, this system bears a high potential for applications quantum information science such as, e.g., quantum logic gates, quantum communication and quantum teleportation. In this thesis I present an experiment on the deterministic coupling of a single neutral atom to the mode of a high-finesse optical resonator. In Chapter 1 I describe our basic techniques for trapping and observing single cesium atoms. As a source of single atoms we use a high-gradient magneto-optical trap, which captures the atoms from background gas in a vacuum chamber and cools them down to millikelvin temperatures. The atoms are then transferred without loss into a standing-wave dipole trap, which provides a conservative potential required for experiments on atomic coherence such as quantum information processing and metrology on trapped atoms. Moreover, shifting the standing-wave pattern allows us to deterministically transport the atoms (Chapter 2). In combination with non-destructive fluorescence imaging of individual trapped atoms, this enables us to control their position with submicrometer precision over several millimeters along the dipole trap. The cavity QED system can distinctly display quantum behaviour in the so-called strong coupling regime, i.e., when the coherent atom-cavity coupling rate dominates dissipation in the system. This sets the main requirements on the resonator's properties: small mode volume and high finesse. Chapter 3 is devoted to the manufacturing, assembling, and testing of an ultra-high finesse optical Fabry-Perot resonator, stabilized to the atomic transition. In Chapter 4 I present the transportation of single atoms into the cavity and their coupling to the cavity mode. The strong coupling manifests itself in a strong reduction of the cavity transmission probed by a weak external laser. The atoms remain trapped and coupled to the cavity mode for several seconds until we move them out of the cavity for final analysis of their number and position.
Cavity quantum electrodynamics (QED) offers powerful possibilities for the deterministic control of atom-photon interactions quantum by quantum [1]. Indeed, modern experiments in cavity QED have achieved the exceptional circumstance of strong coupling, for which single quanta can profoundly impact the dynamics of the atom-cavity system. The diverse accomplishments of this field set the stage for advances into yet broader frontiers in quantum information science for which cavity QED offers unique advantages, such as the realization of quantum networks by way of multiple atom-cavity systems linked by optical interconnects [2,3].
In recent years, remarkable advances in the science of laser cooling and trapping of atomic samples have lead to breakthroughs in quantum optics and, in particular, in cavity quantum electrodynamics (QED). The ability to optically trap an atom within the mode of a ultra-high finesse cavity of small mode volume for experimentally significant periods of time now allows for the continuous observation of fundamental quantum optical effects. This dissertation will focus on experiments conducted to fully characterize and exert quantum control over a strongly-coupled atom-cavity system consisting of single cesium atoms isolated by a dipole trapping in the mode of a Fabry-Perot optical resonator. In particular, we describe techniques developed and implemented for exerting coherent control over the internal and quantum motional state of these atoms using stimulated Raman processes. We also focus on the applications of this system to quantum networking and quantum information science, particularly within the context of coherently transferring quantum states from atom to quantum optical fields and back. Finally, we describe a series of measurements carried out to explore the characteristic dynamics of the Jaynes-Cummings Hamiltonian which governs the system. This includes spectroscopic measurement of the signature vacuum Rabi splitting for strongly-coupled cavity QED as well as evidence in the time domain for coherent Rabi nutation of excitation between atom and field on resonance.
In order to study quantum effects such as state superposition and entanglement, one would like to construct simple systems for which the damping rates are slow relative to the rate of coherent evolution. One such system is strong-coupling cavity quantum electrodynamics (QED), in which a single atom is coupled to a single mode of a high finesse optical cavity. In recent years, optical trapping techniques have been applied to the cavity QED system, allowing an individual atom to remain coupled to the cavity for long periods of time. For the purpose of future cavity QED experiments, one would like to gain as much control over the trapped atom as possible; in particular, one would like to cool the center of mass motion of the atom, to measure the magnetic field at the location of the atom, and to be able to prepare the atom in a given internal state. In the first part of this thesis, I present a scheme for driving Raman transitions inside the cavity that can be used to achieve these goals. After giving a detailed theoretical treatment of the Raman scheme, I describe how it can be implemented in the lab and discuss some preliminary experimental results. In the second part of this thesis, I present a number of simple field theory models. These models were developed in an attempt to understand some of the central ideas of theoretical physics by looking at how the ideas work in a highly simplified context. The hope is that by reducing the mathematical complexity of an actual theory, the underlying physical concepts can be more easily understood.
Recent experimental advances in the field of cavity quantum electrodynamics (QED) have opened new possibilities for control of atom‐photon interactions. A laser with “one and the same atom” demonstrates the theory of laser operation pressed to its conceptual limit. The generation of single photons on demand and the realization of cavity QED with well defined atomic numbers N = 0, 1, 2,… both represent important steps toward realizing diverse protocols in quantum information science. Coherent manipulation of the atomic state via Raman transitions provides a new tool in cavity QED for in situ monitoring and control of the atom‐cavity system. All of these achievements share a common point of departure: the regime of strong coupling. It is thus interesting to consider briefly the history of the strong coupling criterion in cavity QED and to trace out the path that research has taken in the pursuit of this goal.