Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Fractal superconducting resonators for the interrogation of two-level systems

D. de Graaf, Sebastian Erik

Published Jan 1, 2014• 1 citation
OpenAlex

Abstract

In this thesis we use high-Q superconducting thin-film microwave resonators to interact with several types of quantum mechanical two-level systems. Such a resonator is used as the central building block in a cryogenic near-field scanning microwave microscope (NSMM) to reach a completely new regime of NSMM operation. In this regime where the superconducting resonator is only populated with a small number of photons, we demonstrate a capacitance sensitivity down to 64x10^(-21) Farad/rtHz and nanoscale resolution, which is sufficient to apply this scanning probe technique to quantum coherent objects. Such a 'coherent'-NSMM enables several new applications: for example to study the interaction of the NSMM probe with two-level defects in samples and to characterize artificial two-level systems (qubits), which eventually could lead to better understanding of decoherence mechanisms in superconducting quantum circuits. We demonstrate the ability to reach this regime in a sample consisting of a Cooper-pair box (CPB) weakly coupled to a superconducting resonator. In the strong driving regime we observe Landau-Zener-Stückelberg interference and we discover a new type of relaxation mechanism in the strongly driven CPBthat involves pair breaking and quasiparticle tunneling. It results in a recovered parity of the CPB and a population inversion of the dressed states. Not only does this demonstrate the applicability of NSMM for qubit characterization, but the quasiparticle mediated population inversion also becomes suitable for robust charge sensing in a scanning probe setup. To integrate the superconducting resonator onto our NSMM probe we develop a new type of resonator design - the fractal design - that have a very small external dipole moment allowing for a compact resonator. Another advantage of the fractal resonator is its resilience to magnetic fields. We show that the fractal resonator, after further optimization, can maintain quality factors above 10^5 in applied fields of more than 400 mT, something that becomes particularly useful for the interrogation of spin ensembles coupled to the resonator. We demonstrate that it is possible to detect down to 5x10^5 spins/rtHz in a very small volume coupled to a fractal resonator. Furthermore, the low dipole moment of the fractal resonator allows us to also introduce DC bias into the resonator without degrading its Q-factor. This is an important technological step that allows us to interact with new materials where spins can be quickly and locally manipulated using electric fields and we demonstrate the first steps in this direction with ensembles of manganese doped ZnO nanowires and frustrated molecular Cu spin triangles.The measurements achieve a very high sensitivity thanks to the Pound-Drever-Hall locking technique used. We develop this technique such that both resonance frequency and quality factor can be monitored with very high accuracy in real time. The demonstrated stability is ~30 Hz/rtHz for frequency readout and we can determine the Q-factor with a precision of 34 dB/rtHz.

Related papers

Slow propagation line-based superconducting devices for quantum technology

A. A. Adamyan

In the field of circuit quantum electrodynamics (c-QED), the coherent interaction of two-level systems (TLSs) with photons, confined in a superconducting microwave\nresonator, opens up new possibilities for quantum computing experiments.\nThis thesis contributes to the expansion of c-QED tool-box with slow propagation line-based solutions for ubiquitous techniques, such as cryogenic Near Field Scanning Microwave Microscopy (NSMM), Electron Spin Resonance (ESR) spectroscopy and Traveling Wave Parametric Amplifier (TWPA). For NSMM, novel compact superconducting fractal resonators have been developed to be directly integrated on a scanning probe. We report NSMM operation based on a microwave high-Q resonator populated with less than 10^3 photons and demonstrate a capacitive sensitivity of 0.38 aF/rtHz.\nThe unique properties and the design flexibility of fractal resonators also boost their resiliency to strong magnetic fields for ESR studies. The reported high Q-factors above 10^5 in a magnetic field up to 0.4 T translate into ESR sensitivity of 5 10^5 spins/rtHz.\nFurthermore, we demonstrate the operation of a practical TWPA based on a slow propagation fractal line. We achieve per unit length gain of > 0.5 dB/cm and total gain of ~6 dB for a 10 cm long line. Due to a radically shortened line, the amplifier is less vulnerable to fabrication defects. Moreover, due to a successful impedance matching\nbetween the amplifier line and in/out terminals, the obtained gain vs frequency characteristic has only moderate ripples. To mitigate a common TWPA problem of\ncoupling to parasitic ground plane resonances, we deploy a novel multilayer fabrication technology, which combines high and low kinetic inductance (KI) elements.\nFinally, we present an alternative implementation of a slow propagation line: a microstrip line with a thin film Atomic Layer Deposition (ALD) Al2O3 oxide. The resonator, based on a segment of a microstrip line, has a Q-factor on the order of 10^4 at single photon powers, reaching up to 10^5 at higher powers. As an additional functionality,\nwe incorporate dc current control over KI so that the resonance frequency is tuned by 62 MHz range, which corresponds to a KI-related nonlinearity of 3%.

•Jan 1, 2016•0 citations

A near-field scanning microwave microscope based on a superconducting resonator for low power measurements

Sebastian E. de Graaf, Andrey V. Danilov, A. A. Adamyan +1 more

We report on the design and performance of a cryogenic (300 mK) near-field scanning microwave microscope. It uses a microwave resonator as the near-field sensor, operating at a frequency of 6 GHz and microwave probing amplitudes down to 100 μV, approaching low enough photon population (N ∼ 1000) of the resonator such that coherent quantum manipulation becomes feasible. The resonator is made out of a miniaturized distributed fractal superconducting circuit that is integrated with the probing tip, micromachined to be compact enough such that it can be mounted directly on a quartz tuning-fork, and used for parallel operation as an atomic force microscope (AFM). The resonator is magnetically coupled to a transmission line for readout, and to achieve enhanced sensitivity we employ a Pound-Drever-Hall measurement scheme to lock to the resonance frequency. We achieve a well localized near-field around the tip such that the microwave resolution is comparable to the AFM resolution, and a capacitive sensitivity down to 6.4 × 10(-20) F/Hz, limited by mechanical noise. We believe that the results presented here are a significant step towards probing quantum systems at the nanoscale using near-field scanning microwave microscopy.

arXiv:1404.0534•Review of Scientific Instruments•Feb 1, 2013•33 citations

Coherent interaction with two-level fluctuators using near field scanning microwave microscopy

Sebastian E. de Graaf, Andrey V. Danilov, Sergey Kubatkin

Near field Scanning Microwave Microscopy (NSMM) is a scanning probe technique that non-invasively can obtain material properties on the nano-scale at microwave frequencies. While focus has been on developing room-temperature systems it was recently shown that this technique can potentially reach the quantum regime, opening up for applications in materials science and device characterization in solid state quantum information processing. In this paper we theoretically investigate this new regime of NSMM. Specifically we show that interaction between a resonant NSMM probe and certain types of two-level systems become possible when the NSMM probe operates in the (sub-) single photon regime, and we expect a high signal-to-noise ratio if operated under the right conditions. This would allow to detect single atomic material defects with energy splittings in the GHz range with nano-scale resolution, provided that individual defects in the material under study are well enough separated. We estimate that this condition is fulfilled for materials with loss tangents below tan δ ∼ 10(-3) which holds for materials used in today's quantum circuits and devices where typically tan δ < 10(-5). We also propose several extensions to a resonant NSMM that could improve sensitivity and functionality also for microscopes operating in a high power regime.

Scientific Reports•Nov 24, 2015•10 citations

Magnetic field resilient superconducting fractal resonators for coupling to free spins

Sebastian E. de Graaf, Andrey V. Danilov, A. A. Adamyan +2 more

We demonstrate a planar superconducting microwave resonator intended for use in applications requiring strong magnetic fields and high quality factors. In perpendicular magnetic fields of 20 mT, the niobium resonators maintain a quality factor above 25 000 over a wide range of applied powers, down to single photon population. In parallel field, the same quality factor is observed above 160 mT, the field required for coupling to free spins at a typical operating frequency of 5 GHz. We attribute the increased performance to the current branching in the fractal design. We demonstrate that our device can be used for spectroscopy by measuring the dissipation from a pico-mole of molecular spins.

Journal of Applied Physics•Dec 15, 2012•53 citations

Near-Field Scanning Microwave Microscopy in the Single Photon Regime

Shaun Geaney, David Cox, T. Hönigl-Decrinis +5 more

Abstract The microwave properties of nano-scale structures are important in a wide variety of applications in quantum technology. Here we describe a low-power cryogenic near-field scanning microwave microscope (NSMM) which maintains nano-scale dielectric contrast down to the single microwave photon regime, up to 109 times lower power than in typical NSMMs. We discuss the remaining challenges towards developing nano-scale NSMM for quantum coherent interaction with two-level systems as an enabling tool for the development of quantum technologies in the microwave regime.

arXiv:1902.08066•Scientific Reports•Aug 29, 2019•36 citations

A scanning resonator for probing quantum coherent devices

Jared Gibson, Zhanzhi Jiang, Angela Kou

Superconducting resonators with high quality factors are extremely sensitive detectors of the complex impedance of materials and devices coupled to them. This capability has been used to measure losses in multiple different materials and, in the case of circuit quantum electrodynamics (circuit QED), has been used to measure the coherent evolution of multiple different types of qubits. Here, we report on the implementation of a scanning resonator for probing quantum coherent devices. Our scanning setup enables tunable coherent coupling to systems of interest without the need for fabricating on-chip superconducting resonators. We measure the internal quality factor of our resonator sensor in the single-photon regime to be >104 and demonstrate capacitive imaging using our sensor with zeptoFarad sensitivity and micron spatial resolution at milliKelvin temperatures. We then use our setup to characterize the energy spectrum and coherence times of multiple transmon qubits with no on-chip readout circuitry. Our experiments introduce a new tool for using circuit QED to measure existing and proposed qubit platforms.

arXiv:2506.22620•Review of Scientific Instruments•Dec 1, 2025•1 citation
In this thesis we use high-Q superconducting thin-film microwave resonators to interact with several types of quantum mechanical two-level systems. Such a resonator is used as the central building block in a cryogenic near-field scanning microwave microscope (NSMM) to reach a completely new regime of NSMM operation. In this regime where the superconducting resonator is only populated with a small number of photons, we demonstrate a capacitance sensitivity down to 64x10^(-21) Farad/rtHz and nanoscale resolution, which is sufficient to apply this scanning probe technique to quantum coherent objects. Such a 'coherent'-NSMM enables several new applications: for example to study the interaction of the NSMM probe with two-level defects in samples and to characterize artificial two-level systems (qubits), which eventually could lead to better understanding of decoherence mechanisms in superconducting quantum circuits. We demonstrate the ability to reach this regime in a sample consisting of a Cooper-pair box (CPB) weakly coupled to a superconducting resonator. In the strong driving regime we observe Landau-Zener-Stückelberg interference and we discover a new type of relaxation mechanism in the strongly driven CPBthat involves pair breaking and quasiparticle tunneling. It results in a recovered parity of the CPB and a population inversion of the dressed states. Not only does this demonstrate the applicability of NSMM for qubit characterization, but the quasiparticle mediated population inversion also becomes suitable for robust charge sensing in a scanning probe setup. To integrate the superconducting resonator onto our NSMM probe we develop a new type of resonator design - the fractal design - that have a very small external dipole moment allowing for a compact resonator. Another advantage of the fractal resonator is its resilience to magnetic fields. We show that the fractal resonator, after further optimization, can maintain quality factors above 10^5 in applied fields of more than 400 mT, something that becomes particularly useful for the interrogation of spin ensembles coupled to the resonator. We demonstrate that it is possible to detect down to 5x10^5 spins/rtHz in a very small volume coupled to a fractal resonator. Furthermore, the low dipole moment of the fractal resonator allows us to also introduce DC bias into the resonator without degrading its Q-factor. This is an important technological step that allows us to interact with new materials where spins can be quickly and locally manipulated using electric fields and we demonstrate the first steps in this direction with ensembles of manganese doped ZnO nanowires and frustrated molecular Cu spin triangles.The measurements achieve a very high sensitivity thanks to the Pound-Drever-Hall locking technique used. We develop this technique such that both resonance frequency and quality factor can be monitored with very high accuracy in real time. The demonstrated stability is ~30 Hz/rtHz for frequency readout and we can determine the Q-factor with a precision of 34 dB/rtHz.
In the field of circuit quantum electrodynamics (c-QED), the coherent interaction of two-level systems (TLSs) with photons, confined in a superconducting microwave\nresonator, opens up new possibilities for quantum computing experiments.\nThis thesis contributes to the expansion of c-QED tool-box with slow propagation line-based solutions for ubiquitous techniques, such as cryogenic Near Field Scanning Microwave Microscopy (NSMM), Electron Spin Resonance (ESR) spectroscopy and Traveling Wave Parametric Amplifier (TWPA). For NSMM, novel compact superconducting fractal resonators have been developed to be directly integrated on a scanning probe. We report NSMM operation based on a microwave high-Q resonator populated with less than 10^3 photons and demonstrate a capacitive sensitivity of 0.38 aF/rtHz.\nThe unique properties and the design flexibility of fractal resonators also boost their resiliency to strong magnetic fields for ESR studies. The reported high Q-factors above 10^5 in a magnetic field up to 0.4 T translate into ESR sensitivity of 5 10^5 spins/rtHz.\nFurthermore, we demonstrate the operation of a practical TWPA based on a slow propagation fractal line. We achieve per unit length gain of > 0.5 dB/cm and total gain of ~6 dB for a 10 cm long line. Due to a radically shortened line, the amplifier is less vulnerable to fabrication defects. Moreover, due to a successful impedance matching\nbetween the amplifier line and in/out terminals, the obtained gain vs frequency characteristic has only moderate ripples. To mitigate a common TWPA problem of\ncoupling to parasitic ground plane resonances, we deploy a novel multilayer fabrication technology, which combines high and low kinetic inductance (KI) elements.\nFinally, we present an alternative implementation of a slow propagation line: a microstrip line with a thin film Atomic Layer Deposition (ALD) Al2O3 oxide. The resonator, based on a segment of a microstrip line, has a Q-factor on the order of 10^4 at single photon powers, reaching up to 10^5 at higher powers. As an additional functionality,\nwe incorporate dc current control over KI so that the resonance frequency is tuned by 62 MHz range, which corresponds to a KI-related nonlinearity of 3%.
We report on the design and performance of a cryogenic (300 mK) near-field scanning microwave microscope. It uses a microwave resonator as the near-field sensor, operating at a frequency of 6 GHz and microwave probing amplitudes down to 100 μV, approaching low enough photon population (N ∼ 1000) of the resonator such that coherent quantum manipulation becomes feasible. The resonator is made out of a miniaturized distributed fractal superconducting circuit that is integrated with the probing tip, micromachined to be compact enough such that it can be mounted directly on a quartz tuning-fork, and used for parallel operation as an atomic force microscope (AFM). The resonator is magnetically coupled to a transmission line for readout, and to achieve enhanced sensitivity we employ a Pound-Drever-Hall measurement scheme to lock to the resonance frequency. We achieve a well localized near-field around the tip such that the microwave resolution is comparable to the AFM resolution, and a capacitive sensitivity down to 6.4 × 10(-20) F/Hz, limited by mechanical noise. We believe that the results presented here are a significant step towards probing quantum systems at the nanoscale using near-field scanning microwave microscopy.
Near field Scanning Microwave Microscopy (NSMM) is a scanning probe technique that non-invasively can obtain material properties on the nano-scale at microwave frequencies. While focus has been on developing room-temperature systems it was recently shown that this technique can potentially reach the quantum regime, opening up for applications in materials science and device characterization in solid state quantum information processing. In this paper we theoretically investigate this new regime of NSMM. Specifically we show that interaction between a resonant NSMM probe and certain types of two-level systems become possible when the NSMM probe operates in the (sub-) single photon regime, and we expect a high signal-to-noise ratio if operated under the right conditions. This would allow to detect single atomic material defects with energy splittings in the GHz range with nano-scale resolution, provided that individual defects in the material under study are well enough separated. We estimate that this condition is fulfilled for materials with loss tangents below tan δ ∼ 10(-3) which holds for materials used in today's quantum circuits and devices where typically tan δ < 10(-5). We also propose several extensions to a resonant NSMM that could improve sensitivity and functionality also for microscopes operating in a high power regime.
We demonstrate a planar superconducting microwave resonator intended for use in applications requiring strong magnetic fields and high quality factors. In perpendicular magnetic fields of 20 mT, the niobium resonators maintain a quality factor above 25 000 over a wide range of applied powers, down to single photon population. In parallel field, the same quality factor is observed above 160 mT, the field required for coupling to free spins at a typical operating frequency of 5 GHz. We attribute the increased performance to the current branching in the fractal design. We demonstrate that our device can be used for spectroscopy by measuring the dissipation from a pico-mole of molecular spins.
Abstract The microwave properties of nano-scale structures are important in a wide variety of applications in quantum technology. Here we describe a low-power cryogenic near-field scanning microwave microscope (NSMM) which maintains nano-scale dielectric contrast down to the single microwave photon regime, up to 109 times lower power than in typical NSMMs. We discuss the remaining challenges towards developing nano-scale NSMM for quantum coherent interaction with two-level systems as an enabling tool for the development of quantum technologies in the microwave regime.
Superconducting resonators with high quality factors are extremely sensitive detectors of the complex impedance of materials and devices coupled to them. This capability has been used to measure losses in multiple different materials and, in the case of circuit quantum electrodynamics (circuit QED), has been used to measure the coherent evolution of multiple different types of qubits. Here, we report on the implementation of a scanning resonator for probing quantum coherent devices. Our scanning setup enables tunable coherent coupling to systems of interest without the need for fabricating on-chip superconducting resonators. We measure the internal quality factor of our resonator sensor in the single-photon regime to be >104 and demonstrate capacitive imaging using our sensor with zeptoFarad sensitivity and micron spatial resolution at milliKelvin temperatures. We then use our setup to characterize the energy spectrum and coherence times of multiple transmon qubits with no on-chip readout circuitry. Our experiments introduce a new tool for using circuit QED to measure existing and proposed qubit platforms.