Superconducting resonators with high quality factors are extremely sensitive detectors of the complex impedance of materials and devices coupled to them. This capability has been used to measure losses in multiple different materials and, in the case of circuit quantum electrodynamics (circuit QED), has been used to measure the coherent evolution of multiple different types of qubits. Here, we report on the implementation of a scanning resonator for probing quantum coherent devices. Our scanning setup enables tunable coherent coupling to systems of interest without the need for fabricating on-chip superconducting resonators. We measure the internal quality factor of our resonator sensor in the single-photon regime to be >104 and demonstrate capacitive imaging using our sensor with zeptoFarad sensitivity and micron spatial resolution at milliKelvin temperatures. We then use our setup to characterize the energy spectrum and coherence times of multiple transmon qubits with no on-chip readout circuitry. Our experiments introduce a new tool for using circuit QED to measure existing and proposed qubit platforms.
Superconducting resonators with high quality factors are extremely sensitive detectors of the complex impedance of materials and devices coupled to them. This capability has been used to measure losses in multiple different materials and, in the case of circuit quantum electrodynamics (circuit QED), has been used to measure the coherent evolution of multiple different types of qubits. Here, we report on the implementation of a scanning resonator for probing quantum coherent devices. Our scanning setup enables tunable coherent coupling to systems of interest without the need for fabricating on-chip superconducting resonators. We measure the internal quality factor of our resonator sensor in the single-photon regime to be >104 and demonstrate capacitive imaging using our sensor with zeptoFarad sensitivity and micron spatial resolution at milliKelvin temperatures. We then use our setup to characterize the energy spectrum and coherence times of multiple transmon qubits with no on-chip readout circuitry. Our experiments introduce a new tool for using circuit QED to measure existing and proposed qubit platforms.
We present fabrication and characterization procedures of devices for circuit quantum electrodynamics (cQED). We have made 3-GHz cavities with quality factors in the range 10/sup 4/-10/sup 6/, which allow access to the strong coupling regime of cQED. The cavities are transmission line resonators made by photolithography. They are coupled to the input and output ports via gap capacitors. An Al-based Cooper pair box is made by e-beam lithography and Dolan bridge double-angle evaporation in superconducting resonators with high quality factor. An important issue is to characterize the quality factor of the resonators. We present an RF-characterization of superconducting resonators as a function of temperature and magnetic field. We have realized different versions of the system with different box-cavity couplings by using different dielectrics and by changing the box geometry. Moreover, the cQED approach can be used as a diagnostic tool of qubit internal losses.
We report our development on design, fabrication and characterization of various superconducting resonators for quantum device applications. The resonators are developed mainly for superconducting qubit implementation in circuit QED structure, but future application will include photon detectors such as microwave kinetic inductance detectors. First we designed and fabricated half-wavelength coplanar waveguide resonators with niobium thin film on a high resistive silicon wafer, with the fundamental frequencies in the range of 1 to 8 GHz. The loaded quality factors are controlled by the coupling capacitors, and the lower bound of the intrinsic quality factor was measured down to 7 mK in the dilution refrigerator. We have also designed quarter-wavelength resonators and lumped LC resonators coupled to a transmission line, and characterized multiple resonators in a single transmission line. For the 3D transmon qubit application, we designed and fabricated a rectangular box resonator with superconducting aluminum. The intrinsic quality factor of the box resonator exceeds three million at 7 mK. We will also present basic results on the integration of a transmon qubit in the superconducting resonator.
One of the key elements in circuit quantum electrodynamics (cQED) is the superconducting microwave resonator, which can enable strong coupling to and between nanoscale quantum systems, and as a result has emerged as an essential tool for both quantum information and quantum sensing. In this thesis, I will discuss new applications of superconducting resonators in both of these fields, which illustrates how quantum information and quantum sensing can be strongly tied together. As the field of quantum information continues to grow, various platforms for realizing a quantum computer have been proposed. One attractive platform is to control and manipulate the spin of an electron to form spin qubits, which have demonstrated a long coherence time, weak coupling to the environment, and high fidelity single- and two-qubit gates. However, scaling beyond two qubits has proven challenging, as has incorporating long-range coupling, although both are crucial for making spin qubits a scalable quantum computing platform. The confinement of electromagnetic fields in superconducting resonators enables strong coupling to small systems, such as the single electrons of a spin qubit. In the first part of this thesis, I will describe how a singlet-triplet spin qubit coupled to a high-impedance superconducting resonator constitutes a promising architecture for mediating long-ranged interactions based on a longitudinal coupling between the resonator and qubit. I will discuss the technical developments needed to successfully implement this novel type of interaction in a hybrid spin qubit-resonator device. This type of interaction has several advantages over the more commonly studied transverse coupling scheme: it does not require careful tuning of the qubit frequency to match that of the resonator, which facilitates scaling to a large number of qubits, and also avoids the loss of coherence, which is inevitable in resonant coupling. This type of interaction therefore opens promising paths for generating high-fidelity long-ranged two-qubit coupling by employing superconducting microwave resonators. By adapting techniques used in quantum information, we have also developed a new technique in quantum sensing, where we employ superconducting resonators as a probe of quantum materials such as mesoscopic systems, two-dimensional materials, and heterostructures, which are otherwise challenging to experimentally access with conventional techniques. In the second part of my thesis, I will discuss how implementing cQED techniques from quantum information allows us to probe the symmetry of the order parameter in unconventional superconductors. Unconventional superconductors are not readily available, and we therefore study an engineered system that comprises of interfacing a ferromagnet and superconductor, in which unconventional pairing can be induced into the ferromagnet. This platform allows us to simultaneously excite spin waves, a collective excitation of spins, in the ferromagnet, which opens new directions for studying interactions between coherently coupled magnons (quanta of spin waves) and unconventional superconducting states. Finally, by applying the same technique to a two-dimensional (2D) superconductor, tungsten ditelluride, we leverage this platform in an attempt to study the order parameter of its intrinsic superconducting phase. The nature of the order parameter in this material remains an open question, as both topological and superconducting phases can exist, possibly simultaneously. This work thus demonstrates a unique use of superconducting resonators beyond quantum information applications.
Superconducting qubits are fabricated "loss-free" electrical circuits on a chip with size features of tens of nanometers. If cooled to cryogenic temperatures below -273 °C they behave as quantum elements, similar to atoms and molecules. Such a qubit can be manipulated by fast-oscillating magnetic fields and its resulting quantum state can be measured using a proper magnetic detector. These qubits could be the basic elements for a quantum processor. To that order, multiple qubits have to controllably interact, and to that purpose very high quality resonators are fabricated on the same chip. Effectively the interaction results from the phase-coherent exchange of a single photon between qubit and resonator. In this way it is highly analogous to the so-called cavity QED in atomic physics where single atoms couple to a single trapped photon, all inside a cavity resonator. In this thesis, a superconducting flux qubit has been coupled to an LC resonator and coherent exchange of a single photon between qubit and resonator has been achieved. A striking option in these superconducting circuits, not attainable in "common" atomic cavity-QED, is that the interaction between qubit and photon can be made very large, up to the limit that one no longer can talk about the qubit and resonator as such. This limit requires a fully different description and it leads to novel effects, e.g. in the energy spectrum of the qubit-resonator composite. The Bloch-Siegert spectral shift is experimentally demonstrated in this thesis. As a small but critical technical aside a new type of control line filter has been developed, which allows strong suppression of excess electrical noise that forms a threat for qubit coherence. Having two modes of operation, it shorts all low-frequency noise if control is idle while being transparent if control is active, where short or open is determined by the control line signal level itself.
This thesis presents circuit quantum electrodynamic (cQED) experiments done with artificial atoms coupled to a high quality factor superconducting microwave resonator. This work discusses the theoretical framework, design, fabrication, implementation and characterization of a multi-qubit system using superconducting persistent current qubits, often referred as flux qubits. \n \nWe developed a new type of cryogenic aid for fast turnaround microwave experiments. The minimum turnaround time to perform microwave experiments in dilution refrigerators is typically a few days, as required by cooling down and warming up the entire refrigerator. The cryogenic microwave payload and wiring needed for each qubit and resonator add a significant heat load to \nthe system which typically only has a few µW s of cooling power at millikelvin temperatures. We present a new experimental approach we developed in which a suitable sample holder is attached to a cold-insertable probe and brought in contact with transmission lines permanently mounted inside the cryostat. The total turnaround time is reduced to 8 hours if the target temperature is 80 mK. This new measurement method increased our ability to successfully identify good devices with fast design-characterization iterations, while allowing months-long measurements at 30 mK. \n \nOur device architecture uses several qubits, each of which is controlled via on-chip fast flux bias lines. Readout of the qubit’s quantum state is performed by homodyne detection of the resonator field at large driving power. We observe long coherence times at the optimal bias point of the flux qubits and present decoherence measurements around this optimal point, where the \nflux qubits couple mostly to magnetic flux noise. Dynamical decoupling techniques employing fast microwave pulses are used to protect the qubit’s coherence and allow calculating the magnetic flux noise power spectral density of the qubit’s environment. Photon-mediated interaction between distant qubits in the resonator allows the implementation of a two-qubit controlled-NOT gate \nusing the selective darkening technique. \n \nThis multi-qubit superconducting design is an interesting platform to study the decoherence properties of flux qubits, the properties of strong interaction of electromagnetic radiation with macroscopic quantum systems. These results demonstrate the potential of cQED as a platform for fundamental investigations of decoherence and quantum dynamics of flux qubits.
High quality on-chip microwave resonators have recently found prominent new applications in quantum optics and quantum information processing experiments with superconducting electronic circuits, a field now known as circuit quantum electrodynamics (QED). They are also used as single photon detectors and parametric amplifiers. Here we analyze the physical properties of coplanar waveguide resonators and their relation to the materials properties for use in circuit QED. We have designed and fabricated resonators with fundamental frequencies from 2 to 9 GHz and quality factors ranging from a few hundreds to a several hundred thousands controlled by appropriately designed input and output coupling capacitors. The microwave transmission spectra measured at temperatures of 20 mK are shown to be in good agreement with theoretical lumped element and distributed element transmission matrix models. In particular, the experimentally determined resonance frequencies, quality factors, and insertion losses are fully and consistently explained by the two models for all measured devices. The high level of control and flexibility in design renders these resonators ideal for storing and manipulating quantum electromagnetic fields in integrated superconducting electronic circuits.