Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

An Iterative Scheme of Stopping Set Enlargement in The Design of Short-Length Irregular LDPC Codes

Jingyu Kang, Pingyi Fan, Zhigang Cao

Published Jan 1, 2005• 1 citation
OpenAlex

Abstract

Abstract: Small stopping sets have been proved to be harmful to the error floor performance of a finite-length irregular low-density parity-check (LDPC) code over the binary erasure channel (BEC). On the additive white gaussian noise (AWGN) channel, small stopping sets are expected to have a similar effect. This paper proposes an algorithm that iteratively removes the small-stopping-set-inducing patterns from the graph of a randomly generated irregular LDPC code by means of node exchange, aiming at enlarging the average size of stopping sets in this code. Computer simulation results show that the short-length LDPC codes after our processing achieve a considerable performance improvement in the low-BER region compared to the randomly generated codes. Key words: Error floor, irregular LDPC codes, iterative processing, small stopping set 1

Related papers

Finding Small Stopping Sets in the Tanner Graphs of LDPC Codes

Gerd Richter

The performance of low-density parity-check (LDPC) codes over the binary erasure channel for a low erasure probability is limited by small stopping sets. The frame error rate over the additive white Gaussian noise (AWGN) channel for a high signal-to-noise ratio is limited by small trapping sets and by the minimum distance of the LDPC code, which is equal to the codeword with the minimal Hamming weight. In this paper, we present a simple and fast algorithm based on the error impulse method to find small stopping sets in the Tanner graphs of LDPC codes. Since a codeword with small Hamming weight can be represented by a special stopping set, the algorithm can also be used to find the minimum distance of LDPC codes. Furthermore, we use the size of the small stopping sets and the minimum distance of the code to calculate asymptotic performance bounds for LDPC codes transmitted over the binary erasure and the AWGN channel, respectively and compare the bounds with simulations. 1

•Apr 3, 2006•27 citations

Performance analysis of finite-length LDPC codes

Yingjian Xue, Haige Xiang

In this paper, we are concerned with the finite-length analysis of low-density parity-check (LDPC) codes when used over additive white Gaussian noise (AWGN) channels. We present the iterative decoding algorithm of LDPC codes, and we also discuss the encoding methods and the bipartite graph representation of LDPC codes ensemble. Finite-length LDPC code performances are investigated, and the influence of cycle is pointed out. Simulation results show that irregular LDPC codes with variable and check node degree distribution optimized for infinite-length codes are not optimal for finite-length LDPC codes, and the error patterns of both regular and irregular codes are investigated as an effort to improve the performance and design methodology of finite-length LDPC codes.

IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC)•Jan 1, 2003•5 citations

On Lowering the Error Floor of Short-to-Medium Block Length Irregular Low Density Parity Check Codes

Umar-Faruk Abdu-Aguye

Gallager proposed and developed low density parity check (LDPC) codes in the early 1960s. LDPC codes were rediscovered in the early 1990s and shown to be capacity approaching over the additive white Gaussian noise (AWGN) channel. Subsequently, density evolution (DE) optimized symbol node degree distributions were used to significantly improve the decoding performance of short to medium length irregular LDPC codes. Currently, the short to medium length LDPC codes with the lowest error floor are DE optimized irregular LDPC codes constructed using progressive edge growth (PEG) algorithm modifications which are designed to increase the approximate cycle extrinsic message degrees (ACE) in the LDPC code graphs constructed. The aim of the present work is to find efficient means to improve on the error floor performance published for short to medium length irregular LDPC codes over AWGN channels in the literature. An efficient algorithm for determining the girth and ACE distributions in short to medium length LDPC code Tanner graphs has been proposed. A cyclic PEG (CPEG) algorithm which uses an edge connections sequence that results in LDPC codes with improved girth and ACE distributions is presented. LDPC codes with DE optimized/’good’ degree distributions which have larger minimum distances and stopping distances than previously published for LDPC codes of similar length and rate have been found. It is shown that increasing the minimum distance of LDPC codes lowers their error floor performance over AWGN channels; however, there are threshold minimum distances values above which there is no further lowering of the error floor performance. A minimum local girth (edge skipping) (MLG (ES)) PEG algorithm is presented; the algorithm controls the minimum local girth (global girth) connected in the Tanner graphs of LDPC codes constructed by forfeiting some edge connections. A technique for constructing optimal low correlated edge density (OED) LDPC codes based on modified DE optimized symbol node degree distributions and the MLG (ES) PEG algorithm modification is presented. OED rate-½ (n, k)=(512, 256) LDPC codes have been shown to have lower error floor over the AWGN channel than previously published for LDPC codes of similar length and rate. Similarly, consequent to an improved symbol node degree distribution, rate ½ (n, k)=(1024, 512) LDPC codes have been shown to have lower error floor over the AWGN channel than previously published for LDPC codes of similar length and rate. An improved BP/SPA (IBP/SPA) decoder, obtained by making two simple modifications to the standard BP/SPA decoder, has been shown to result in an unprecedented generalized improvement in the performance of short to medium length irregular LDPC codes under iterative message passing decoding. The superiority of the Slepian Wolf distributed source coding model over other distributed source coding models based on LDPC codes has been shown.

•Jan 1, 2018•0 citations

On a Construction Method of Irregular LDPC Codes Without Small Stopping Sets

Gerd Richter, Axel Hof

In this paper, we present a construction method based on the progressive edge-growth (PEG) algorithm to design irregular low-density parity-check (LDPC) codes without small stopping sets. We show how to choose the connections in the PEG algorithm when having multiple choices to connect a variable node with a check node. Since preventing small stopping sets also prevents a low minimum distance, our construction method also leads to LDPC codes with a higher minimum distance. Furthermore, we show by simulation that our construction method improves the performance over the binary erasure channel and over the additive white Gaussian noise channel for a low erasure probability and a high signal-to-noise ratio, respectively.

International Conference on Communications•Jan 1, 2006•37 citations

Upper Bounding the Performance of Arbitrary Finite LDPC Codes on Binary Erasure Channels

Chih-chun Wang, Sanjeev R. Kulkarni, H. Vincent Poor

Assuming iterative decoding for binary erasure channels (BECs), a novel tree-based technique for upper bounding the bit error rates (BERs) of arbitrary, finite low-density parity-check (LDPC) codes is provided and the resulting bound can be evaluated for all operating erasure probabilities, including both the waterfall and the error floor regions. This upper bound can also be viewed as a narrowing search of stopping sets, which is an approach different from the stopping set enumeration used for lower bounding the error floor. When combined with optimal leaf-finding modules, this upper bound is guaranteed to be tight in terms of the asymptotic order. The Boolean framework proposed herein further admits a composite search for even tighter results. For comparison, a refinement of the algorithm is capable of exhausting all stopping sets of size les 13 for irregular LDPC codes of length n ap 500, which requires (13500) ap 1.67 times 1025trials if a brute force approach is taken. These experiments indicate that this upper bound can be used both as an analytical tool and as a deterministic worst-performance (error floor) guarantee, the latter of which is crucial to optimizing LDPC codes for extremely low BER applications, e.g., optical/satellite communications

arXiv:cs/0605086•IEEE International Symposium on Information Theory (ISIT)•Jul 1, 2006•8 citations

On the probabilistic computation of the stopping redundancy of LDPC codes

Masanori Hirotomo, Yoshiho Konishi, Masakatu Morii

On the binary erasure channel (BEC), the performance of low-density parity-check (LDPC) codes decoded by iterative algorithms is estimated by the small stopping sets in the codes. The size of smallest stopping set is called the stopping distance. Since it depends on the structure of parity-check matrix for the code, we can construct the parity-check matrix by adding dependent rows so that the stopping distance is equal to the minimum distance. The stopping redundancy is defined as the smallest number of rows in such a parity-check matrix. In this paper, we propose a probabilistic algorithm for computing the stopping redundancy of LDPC codes. Additionally, we show numerical results of computing the stopping redundancy of (155,64), (504,252) and (1008,504) LDPC codes.

IEEE International Symposium on Information Theory (ISIT)•Jun 1, 2009•1 citation
Abstract: Small stopping sets have been proved to be harmful to the error floor performance of a finite-length irregular low-density parity-check (LDPC) code over the binary erasure channel (BEC). On the additive white gaussian noise (AWGN) channel, small stopping sets are expected to have a similar effect. This paper proposes an algorithm that iteratively removes the small-stopping-set-inducing patterns from the graph of a randomly generated irregular LDPC code by means of node exchange, aiming at enlarging the average size of stopping sets in this code. Computer simulation results show that the short-length LDPC codes after our processing achieve a considerable performance improvement in the low-BER region compared to the randomly generated codes. Key words: Error floor, irregular LDPC codes, iterative processing, small stopping set 1
The performance of low-density parity-check (LDPC) codes over the binary erasure channel for a low erasure probability is limited by small stopping sets. The frame error rate over the additive white Gaussian noise (AWGN) channel for a high signal-to-noise ratio is limited by small trapping sets and by the minimum distance of the LDPC code, which is equal to the codeword with the minimal Hamming weight. In this paper, we present a simple and fast algorithm based on the error impulse method to find small stopping sets in the Tanner graphs of LDPC codes. Since a codeword with small Hamming weight can be represented by a special stopping set, the algorithm can also be used to find the minimum distance of LDPC codes. Furthermore, we use the size of the small stopping sets and the minimum distance of the code to calculate asymptotic performance bounds for LDPC codes transmitted over the binary erasure and the AWGN channel, respectively and compare the bounds with simulations. 1
In this paper, we are concerned with the finite-length analysis of low-density parity-check (LDPC) codes when used over additive white Gaussian noise (AWGN) channels. We present the iterative decoding algorithm of LDPC codes, and we also discuss the encoding methods and the bipartite graph representation of LDPC codes ensemble. Finite-length LDPC code performances are investigated, and the influence of cycle is pointed out. Simulation results show that irregular LDPC codes with variable and check node degree distribution optimized for infinite-length codes are not optimal for finite-length LDPC codes, and the error patterns of both regular and irregular codes are investigated as an effort to improve the performance and design methodology of finite-length LDPC codes.
Gallager proposed and developed low density parity check (LDPC) codes in the early 1960s. LDPC codes were rediscovered in the early 1990s and shown to be capacity approaching over the additive white Gaussian noise (AWGN) channel. Subsequently, density evolution (DE) optimized symbol node degree distributions were used to significantly improve the decoding performance of short to medium length irregular LDPC codes. Currently, the short to medium length LDPC codes with the lowest error floor are DE optimized irregular LDPC codes constructed using progressive edge growth (PEG) algorithm modifications which are designed to increase the approximate cycle extrinsic message degrees (ACE) in the LDPC code graphs constructed. The aim of the present work is to find efficient means to improve on the error floor performance published for short to medium length irregular LDPC codes over AWGN channels in the literature. An efficient algorithm for determining the girth and ACE distributions in short to medium length LDPC code Tanner graphs has been proposed. A cyclic PEG (CPEG) algorithm which uses an edge connections sequence that results in LDPC codes with improved girth and ACE distributions is presented. LDPC codes with DE optimized/’good’ degree distributions which have larger minimum distances and stopping distances than previously published for LDPC codes of similar length and rate have been found. It is shown that increasing the minimum distance of LDPC codes lowers their error floor performance over AWGN channels; however, there are threshold minimum distances values above which there is no further lowering of the error floor performance. A minimum local girth (edge skipping) (MLG (ES)) PEG algorithm is presented; the algorithm controls the minimum local girth (global girth) connected in the Tanner graphs of LDPC codes constructed by forfeiting some edge connections. A technique for constructing optimal low correlated edge density (OED) LDPC codes based on modified DE optimized symbol node degree distributions and the MLG (ES) PEG algorithm modification is presented. OED rate-½ (n, k)=(512, 256) LDPC codes have been shown to have lower error floor over the AWGN channel than previously published for LDPC codes of similar length and rate. Similarly, consequent to an improved symbol node degree distribution, rate ½ (n, k)=(1024, 512) LDPC codes have been shown to have lower error floor over the AWGN channel than previously published for LDPC codes of similar length and rate. An improved BP/SPA (IBP/SPA) decoder, obtained by making two simple modifications to the standard BP/SPA decoder, has been shown to result in an unprecedented generalized improvement in the performance of short to medium length irregular LDPC codes under iterative message passing decoding. The superiority of the Slepian Wolf distributed source coding model over other distributed source coding models based on LDPC codes has been shown.
In this paper, we present a construction method based on the progressive edge-growth (PEG) algorithm to design irregular low-density parity-check (LDPC) codes without small stopping sets. We show how to choose the connections in the PEG algorithm when having multiple choices to connect a variable node with a check node. Since preventing small stopping sets also prevents a low minimum distance, our construction method also leads to LDPC codes with a higher minimum distance. Furthermore, we show by simulation that our construction method improves the performance over the binary erasure channel and over the additive white Gaussian noise channel for a low erasure probability and a high signal-to-noise ratio, respectively.
Assuming iterative decoding for binary erasure channels (BECs), a novel tree-based technique for upper bounding the bit error rates (BERs) of arbitrary, finite low-density parity-check (LDPC) codes is provided and the resulting bound can be evaluated for all operating erasure probabilities, including both the waterfall and the error floor regions. This upper bound can also be viewed as a narrowing search of stopping sets, which is an approach different from the stopping set enumeration used for lower bounding the error floor. When combined with optimal leaf-finding modules, this upper bound is guaranteed to be tight in terms of the asymptotic order. The Boolean framework proposed herein further admits a composite search for even tighter results. For comparison, a refinement of the algorithm is capable of exhausting all stopping sets of size les 13 for irregular LDPC codes of length n ap 500, which requires (13500) ap 1.67 times 1025trials if a brute force approach is taken. These experiments indicate that this upper bound can be used both as an analytical tool and as a deterministic worst-performance (error floor) guarantee, the latter of which is crucial to optimizing LDPC codes for extremely low BER applications, e.g., optical/satellite communications
On the binary erasure channel (BEC), the performance of low-density parity-check (LDPC) codes decoded by iterative algorithms is estimated by the small stopping sets in the codes. The size of smallest stopping set is called the stopping distance. Since it depends on the structure of parity-check matrix for the code, we can construct the parity-check matrix by adding dependent rows so that the stopping distance is equal to the minimum distance. The stopping redundancy is defined as the smallest number of rows in such a parity-check matrix. In this paper, we propose a probabilistic algorithm for computing the stopping redundancy of LDPC codes. Additionally, we show numerical results of computing the stopping redundancy of (155,64), (504,252) and (1008,504) LDPC codes.