On the block error probability of iteratively decoded LDPC codes

Yuxiang Li

Low-Density Parity-Check code (LDPC) is a kind of linear block error-correcting codes.Sum-product algorithm is an iterative decoding algorithms commonly used in LDPC code decoding.This paper studies into the LDPC code message passing iterative decoding algorithm under the binary symmetric channel (BSC) and simulates the bit error probability,then simulates the convergence of check nodes' and variable nodes' probability density in the iterative process using the method of density evolution.The result show that under a given channel threshold,LDPC code has a good correction performance.

隆之 野崎

Lan Lan, Lingqi Zeng, Y.Y. Tai +3 more

In the late 1950s and early 1960s, finite fields were successfully used to construct linear block codes, especially cyclic codes, with large minimum distances for hard-decision algebraic decoding, such as Bose-Chaudhuri-Hocquenghem (BCH) and Reed-Solomon (RS) codes. This paper shows that finite fields can also be successfully used to construct algebraic low-density parity-check (LDPC) codes for iterative soft-decision decoding. Methods of construction are presented. LDPC codes constructed by these methods are quasi-cyclic (QC) and they perform very well over the additive white Gaussian noise (AWGN), binary random, and burst erasure channels with iterative decoding in terms of bit-error probability, block-error probability, error-floor, and rate of decoding convergence, collectively. Particularly, they have low error floors. Since the codes are QC, they can be encoded using simple shift registers with linear complexity.

David Burshtein, Gadi Miller

Hiroshi Kamabe, Shusaku Kobota

Sarah J. Johnson

Introduction In this chapter we introduce low-density parity-check (LDPC) codes, a class of error correction codes proposed by Gallager in his 1962 PhD thesis 12 years after error correction codes were first introduced by Hamming (published in 1950). Both Hamming codes and LDPC codes are block codes: the messages are broken up into blocks to be encoded at the transmitter and similarly decoded as separate blocks at the receiver. While Hamming codes are short and very structured with a known, fixed, error correction ability, LDPC codes are the opposite, usually long and often constructed pseudo-randomly with only a probabilistic notion of their expected error correction performance. The chapter begins by presenting parity bits as a means to detect and, when more than one is employed, to correct errors in digital data. Block error correction codes are described as a linear combination of parity-check equations and thus defined by their parity-check matrix representation. The graphical representation of codes by Tanner graphs is presented and the necessary graph theoretic concepts introduced. In Section 2.4 iterative decoding algorithms are introduced using a hard decision algorithm (bit flipping), so that the topic is developed first without reference to probability theory. Subsequently the sum–product decoding algorithm is presented. This chapter serves as a self-contained introduction to LDPC codes and their decoding. It is intended that the material presented here will enable the reader to implement LDPC encoders and iterative decoders.