Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Space Optics (ICSO)

Gas-cell atomic clocks for space: new results and alternative schemes

C. Affolderbach, Evelina Breschi, C. Schori, G. Mileti

Published Nov 21, 2017• 2 citations
Publisher

Abstract

We present our development activities on compact Rubidium gas-cell atomic frequency standards, for use in space-borne and ground-based applications. We experimentally demonstrate a high-performance laser optically-pumped Rb clock for space applications such as telecommunications, science missions, and satellite navigation systems (e.g. GALILEO). Using a stabilised laser source and optimized gas cells, we reach clock stabilities as low as 1.5·10-12 τ-1/2 up to 103 s and 4·10-14 at 104 s. The results demonstrate the feasibility of a laser-pumped Rb clock reaching < 1·10-12 τ-1/2 in a compact device (<2 liters, 2 kg, 20 W), given optimization of the implemented techniques. A second activity concerns more radically miniaturized gas-cell clocks, aiming for low power consumption and a total volume around 1 cm3 , at the expense of relaxed frequency stability. Here miniaturized “chip-scale” vapour cells and use of coherent laser interrogation techniques are at the heart of the investigations.

DOI
10.1117/12.2308185

Related papers

Laser optical pumping in Rb vapour-cell atomic clocks (Invited Paper)

G. Mileti, C. Affolderbach

We discuss the basic physical principles of laser optical pumping double-resonance spectroscopy, which form the basis of state-of-the-art vapour-cell atomic frequency standards using laser optical pumping of Rb atoms. The main effects limiting the frequency stability of Rb vapour-cell atomic clocks are identified, and their impact on the development of high-performance frequency standars and their transfer from research laboratories to industry and space is discussed. As examples, the impact of the AC stark effect and the realated issue of laser frequency stabilisation are dealt with in more detail. The main features of the present state-of-the-art Rb atomic frequency standards will be illustrated using the example of the development of atomic clocks for satellite navigation and positioning systems (GPS, GLONAS, GALILEO, etc.) as well as some directions for further improvements that could overcome present day limitations. Such compact Rb clocks find their applications in, for example, telecommunications, local timekeeping and synchronisation, and space applications like satellite navigation and science missions. An overview of other, alternative clock schemes is given and critical issues for future developments towards further performance improvement or device miniaturisation in the field of vapour-cell atomic clocks are discussed.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 22, 2005•0 citations

Laser-pumped high-performance compact gas-cell Rb standard with < 3×10−13 τ−1/2 stability

Thejesh Bandi, C. Affolderbach, G. Mileti +4 more

We demonstrate a high-performance laser-pumped rubidium-cell atomic frequency standard exhibiting a short-term stability of-13τ-1/2. The key components of this standard are a Rb vapor cell of 25mm diameter and a newly developed compact microwave resonator cavity. The overall volume of the clock's physics package - including the frequency-stabilized laser head and physics package - is <; 3 liters, which shows the potential of this compact clock for future portable applications.

European Frequency and Time Forum•Apr 1, 2012•1 citation

High performance vapour-cell frequency standards

Mohammadreza Gharavipour, C. Affolderbach, Songbai Kang +4 more

We report our investigations on a compact high-performance rubidium (Rb) vapourcell clock based on microwave-optical double-resonance (DR).These studies are done in both DR continuous-wave (CW) and Ramsey schemes using the same Physics Package (PP), with the same Rb vapour cell and a magnetron-type cavity with only 45 cm 3 external volume.In the CW-DR scheme, we demonstrate a DR signal with a contrast of 26% and a linewidth of 334 Hz; in Ramsey-DR mode Ramsey signals with higher contrast up to 35% and a linewidth of 160 Hz have been demonstrated.Short-term stabilities of 1.4×10 -13 τ -1/2 and 2.4×10 -13 τ -1/2 are measured for CW-DR and Ramsey-DR schemes, respectively.In the Ramsey-DR operation, thanks to the separation of light and microwave interactions in time, the light-shift effect has been suppressed which allows improving the long-term clock stability as compared to CW-DR operation.Implementations in miniature atomic clocks are considered. IntroductionSince the first invention of lamp-pumped rubidium (Rb) clocks in the 1960's [1,2], the demand for a stable, reliable, and compact Rb frequency standard with low power consumption has been growing, for various applications fields such as industry, telecommunication, navigation, space applications (e.g.GPS [3], GALILEO [4] and COMPASS [5]).Recently, thanks to the semiconductor laser technology, laser-pumped Rb clocks have been considered in several studies, for their better optical pumping efficiency results in short-term frequency stabilities at least one order of magnitude better than their lamp-pumped counterparts [6][7][8][9].This opened up also several new schemes for vapour-cell atomic clocks, such as the continuous-wave (CW) Rb clock [9], coherent population trapping (CPT) Cs clock [10] and pulsed optical pumping (POP) Rb clock [11].In this paper we report our studies on high-performance Rb frequency standards based on the laser-microwave double-resonance (DR) scheme, using both CW and Ramsey interrogation.Both CW-DR and Ramsey-DR schemes require two resonant electromagnetic fields of light and microwave.In the case of CW-DR, the laser optically pumps the vapour of the Rb atoms by creating a polarization of the atomic ground-state; simultaneously the microwave field, generated from a quartz oscillator and is near-resonant with the 87 Rb hyperfine clock transition (energy levels 5 2 S 1/2 │F g =1, m F =0˃ ↔│F g =2, m F =0˃), is applied.The opacity of the Rb vapour to the transmitted light signal as a function of microwave frequency is a measure of the atomic ground state polarization known as CW-DR signal [9].In CW-DR, the steps of optical pumping, microwave interrogation and optical detection are applied simultaneously (figure 1(b)).In the case of Ramsey-DR, these three sequences are separated in time, see figure 1(c): first, during optical pumping a strong laser pulse creates a significant atom population imbalance between

Journal of Physics Conference Series•Jun 1, 2016•20 citations

A compact, high-performance laser-pumped rubidium atomic frequency standard

C. Affolderbach, G. Mileti, Fabien Droz

The paper presents the realisation of a high-performance vapour-cell atomic frequency standard demonstrator based on laser optical pumping. The development of such devices aims to fully exploit the advantages of using a narrow-band diode laser pump light source instead of the discharge lamps commonly used in Rb gas-cell clocks. These advantages include improved control over the pump light spectrum, higher selectivity of the optical pumping, and increased signal contrast, and thus show the potential for the realisation of Rb atomic clocks with improved short-term frequency stability.

European Quantum Electronics Conference (EQEC)•Jan 18, 2006•1 citation

Study of a low power dissipation, miniature laser-pumped rubidium frequency standard

Liu Guo-Bin, Zhao Feng, Sihong Gu

This paper studies a miniature low power consumption laser-pumped atom vapour cell clock scheme. Pumping 87 Rb with a vertical cavity surface emitting laser diode pump and locking the laser frequency on a Doppler-broadened spectral line, it records a 5 × 10 −11 τ −1/2 (τ < 500 s) frequency stability with a table-top system in a primary experiment. The study reveals that the evaluated scheme is at the level of 2.7 watts power consumption, 90 cm 3 volume and 10 −12 τ −1/2 short-term frequency stability.

Chinese Physics B•Sep 1, 2009•9 citations

Double-resonance in alkali vapor cells for high performance and miniature atomic clocks

Thejesh Bandi, Matthieu Pellaton, D. Miletic +9 more

We present two lines of investigations on vapor cell based laser-microwave double-resonance (DR) rubidium atomic frequency standards: a compact high-performance clock exhibiting σy(τ)-13τ-1/2and a miniaturized clock with σy(τ)-11τ-1/2. The applications of these standards are emphasized towards portable applications such as next generation GNSS, deep space missions and telecommunications. Other techniques for DR clocks are discussed in brief.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2012•8 citations
We present our development activities on compact Rubidium gas-cell atomic frequency standards, for use in space-borne and ground-based applications. We experimentally demonstrate a high-performance laser optically-pumped Rb clock for space applications such as telecommunications, science missions, and satellite navigation systems (e.g. GALILEO). Using a stabilised laser source and optimized gas cells, we reach clock stabilities as low as 1.5·10-12 τ-1/2 up to 103 s and 4·10-14 at 104 s. The results demonstrate the feasibility of a laser-pumped Rb clock reaching < 1·10-12 τ-1/2 in a compact device (<2 liters, 2 kg, 20 W), given optimization of the implemented techniques. A second activity concerns more radically miniaturized gas-cell clocks, aiming for low power consumption and a total volume around 1 cm3 , at the expense of relaxed frequency stability. Here miniaturized “chip-scale” vapour cells and use of coherent laser interrogation techniques are at the heart of the investigations.
We discuss the basic physical principles of laser optical pumping double-resonance spectroscopy, which form the basis of state-of-the-art vapour-cell atomic frequency standards using laser optical pumping of Rb atoms. The main effects limiting the frequency stability of Rb vapour-cell atomic clocks are identified, and their impact on the development of high-performance frequency standars and their transfer from research laboratories to industry and space is discussed. As examples, the impact of the AC stark effect and the realated issue of laser frequency stabilisation are dealt with in more detail. The main features of the present state-of-the-art Rb atomic frequency standards will be illustrated using the example of the development of atomic clocks for satellite navigation and positioning systems (GPS, GLONAS, GALILEO, etc.) as well as some directions for further improvements that could overcome present day limitations. Such compact Rb clocks find their applications in, for example, telecommunications, local timekeeping and synchronisation, and space applications like satellite navigation and science missions. An overview of other, alternative clock schemes is given and critical issues for future developments towards further performance improvement or device miniaturisation in the field of vapour-cell atomic clocks are discussed.
We report our investigations on a compact high-performance rubidium (Rb) vapourcell clock based on microwave-optical double-resonance (DR).These studies are done in both DR continuous-wave (CW) and Ramsey schemes using the same Physics Package (PP), with the same Rb vapour cell and a magnetron-type cavity with only 45 cm 3 external volume.In the CW-DR scheme, we demonstrate a DR signal with a contrast of 26% and a linewidth of 334 Hz; in Ramsey-DR mode Ramsey signals with higher contrast up to 35% and a linewidth of 160 Hz have been demonstrated.Short-term stabilities of 1.4×10 -13 τ -1/2 and 2.4×10 -13 τ -1/2 are measured for CW-DR and Ramsey-DR schemes, respectively.In the Ramsey-DR operation, thanks to the separation of light and microwave interactions in time, the light-shift effect has been suppressed which allows improving the long-term clock stability as compared to CW-DR operation.Implementations in miniature atomic clocks are considered. IntroductionSince the first invention of lamp-pumped rubidium (Rb) clocks in the 1960's [1,2], the demand for a stable, reliable, and compact Rb frequency standard with low power consumption has been growing, for various applications fields such as industry, telecommunication, navigation, space applications (e.g.GPS [3], GALILEO [4] and COMPASS [5]).Recently, thanks to the semiconductor laser technology, laser-pumped Rb clocks have been considered in several studies, for their better optical pumping efficiency results in short-term frequency stabilities at least one order of magnitude better than their lamp-pumped counterparts [6][7][8][9].This opened up also several new schemes for vapour-cell atomic clocks, such as the continuous-wave (CW) Rb clock [9], coherent population trapping (CPT) Cs clock [10] and pulsed optical pumping (POP) Rb clock [11].In this paper we report our studies on high-performance Rb frequency standards based on the laser-microwave double-resonance (DR) scheme, using both CW and Ramsey interrogation.Both CW-DR and Ramsey-DR schemes require two resonant electromagnetic fields of light and microwave.In the case of CW-DR, the laser optically pumps the vapour of the Rb atoms by creating a polarization of the atomic ground-state; simultaneously the microwave field, generated from a quartz oscillator and is near-resonant with the 87 Rb hyperfine clock transition (energy levels 5 2 S 1/2 │F g =1, m F =0˃ ↔│F g =2, m F =0˃), is applied.The opacity of the Rb vapour to the transmitted light signal as a function of microwave frequency is a measure of the atomic ground state polarization known as CW-DR signal [9].In CW-DR, the steps of optical pumping, microwave interrogation and optical detection are applied simultaneously (figure 1(b)).In the case of Ramsey-DR, these three sequences are separated in time, see figure 1(c): first, during optical pumping a strong laser pulse creates a significant atom population imbalance between
The paper presents the realisation of a high-performance vapour-cell atomic frequency standard demonstrator based on laser optical pumping. The development of such devices aims to fully exploit the advantages of using a narrow-band diode laser pump light source instead of the discharge lamps commonly used in Rb gas-cell clocks. These advantages include improved control over the pump light spectrum, higher selectivity of the optical pumping, and increased signal contrast, and thus show the potential for the realisation of Rb atomic clocks with improved short-term frequency stability.
This paper studies a miniature low power consumption laser-pumped atom vapour cell clock scheme. Pumping 87 Rb with a vertical cavity surface emitting laser diode pump and locking the laser frequency on a Doppler-broadened spectral line, it records a 5 × 10 −11 τ −1/2 (τ < 500 s) frequency stability with a table-top system in a primary experiment. The study reveals that the evaluated scheme is at the level of 2.7 watts power consumption, 90 cm 3 volume and 10 −12 τ −1/2 short-term frequency stability.