Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bias Dependence of the Thermal Time Constant in Nb Superconducting Diffusion-Cooled HEB Mixers

D. Wilms Floet, J. R. Gao, T. M. Klapwijk, Piet A. J. de Korte

Published May 1, 2000• 0 citations
OpenAlex

Abstract

In this paper, we present an experimental study of the intermediate frequency bandwidth of a Nb diffusion-cooled hot-electron bolometer mixer for different bias voltages. The measurements show that the bandwidth increases with increasing voltage. Analysis of the data reveals that this effect is mainly caused

Related papers

Bias-dependence of the thermal time constant in diffusion-cooled superconducting hot-electron bolometer mixers

D. Wilms Floet, T. M. Klapwijk, J. R. Gao +1 more

We present an experimental study of the intermediate frequency bandwidth of a Nb diffusion-cooled hot-electron bolometer mixer for different bias voltages. The measurements show that the bandwidth increases with increasing voltage. Analysis of the data reveals that this effect is mainly caused by a decrease of the intrinsic thermal time of the mixer and that the effect of electrothermal feedback through the intermediate frequency circuit is small. The results are understood using a qualitative model, which takes into account the different effective diffusion constants in the normal and superconducting domains.

Applied Physics Letters•Sep 11, 2000•9 citations

Thermal time constant of Nb diffusion-cooled superconducting hot-electron bolometer mixers

D. Wilms Floet, J. R. Gao, T. M. Klapwijk +1 more

We present an experimental study of the intermediate frequency bandwidth of a Nb diffusion-cooled hot-electron bolometer mixer for different bias voltages. The measurements show that the bandwidth increases with increasing voltage. Analysis of the data reveals that this effect is mainly caused by a decrease of the intrinsic thermal time constant of the mixer and that the effect of electrothermal feedback through the intermediate frequency circuit is small. The results are understood using a qualitative model, which takes into account the different effective diffusion constants in the normal and superconducting domains.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•2 citations

Characterization of Response Time of Superconducting NbN Hot Electron Bolometer Mixers

GuoAo Xie, Ruixuan Tang, Zhenlin Luo +6 more

Response time of a Superconducting Hot Electron Bolometer (HEB) mixers is a critical parameter, and significantly affects the intermediate frequency (IF) gain bandwidth. In this study, we investigated the effects of temperature and bias voltage on the response time. Response time of superconducting niobium nitride (NbN) HEB mixers were measured by using the pumpprobe technique at temperatures of 5 K, 7 K, and 9 K with different bias voltages. The measured response time ranged from 50 to 80 ps and decreased with increasing temperature and bias voltage. This approach provides a more comprehensive understanding of the thermal transport mechanisms in superconducting HEB mixers, which can ultimately lead to improved performance and properties of the HEB mixers.

International Conference on Electronics Technology (ICET)•May 17, 2025•0 citations

Noise and Bandwidth Measurements of Diffusion-Cooled Nb Hot-Electron Bolometer Mixers at Frequencies Above the Superconductive Energy Gap

Rolf A. Wyss, Boris S. Karasik, William R. McGrath +2 more

Diffusion-cooled Nb hot-electron bolometer (HEB) mixers have the potential to simultaneously achieve high intermediate frequency (IF) bandwidths and low mixer noise temperatures for operation at THz frequencies (above the superconductive gap energy). We have measured the IF signal bandwidth at 630 GHz of Nb devices with lengths L = 0.3, 0.2, and 0.1 micrometer in a quasioptical mixer configuration employing twin-slot antennas. The 3-dB EF bandwidth increased from 1.2 GHz for the 0.3 gm long device to 9.2 GHz for the 0.1 gm long device. These results demonstrate the expected 1/L squared dependence of the IF bandwidth at submillimeter wave frequencies for the first time, as well as the largest EF bandwidth obtained to date. For the 0.1 gm device, which had the largest bandwidth, the double sideband (DSB) noise temperature of the receiver was 320-470 K at 630 GHz with an absorbed LO power of 35 nW, estimated using the isothermal method. A version of this mixer with the antenna length scaled for operation at 2.5 THz has also been tested. A DSB receiver noise temperature of 1800 plus or minus 100 K was achieved, which is about 1,000 K lower than our previously reported results. These results demonstrate that large EF bandwidth and low-noise operation of a diffusion-cooled HEB mixer is possible at THz frequencies with the same device geometry.

Softwaretechnik-Trends•Jan 1, 1999•20 citations

DC and IF Bandwidth Measurements of Superconducting Diffusion-Cooled Hot Electron Bolometer Mixers based on Nb/Au Bilayer

X. Lefoul, Pavel A. Yagoubov, Merlijn Hajenius +5 more

Hot electron bolometer (HEB) mixers based on a superconductor-normal metal bilayer [1] are expected to improve the overall performance, in comparison with existing Nb or NbN mixers: lower mixer noise, larger intermediate frequency (IF) bandwidth, and in particular, lower LO power requirement. The bilayer takes advantage of the idea that one

•Mar 1, 2002•1 citation

Low noise and wide bandwidth of NbN hot-electron bolometer mixers

Ivan V. Tretyakov, Рябчун Сергей Александрович, Matvey I. Finkel +5 more

We report a record double sideband noise temperature of 600 K (5hν/kB) offered by a NbN hot-electron bolometer receiver at 2.5 THz. Allowing for standing wave effects, this value was found to be constant in the intermediate frequency range 1–7 GHz, which indicates that the mixer has an unprecedentedly large noise bandwidth in excess of 7 GHz. The insight into this is provided by gain bandwidth measurements performed at the superconducting transition. They show that the dependence of the bandwidth on the mixer length follows the model for an HEB mixer with diffusion and phonon cooling of the hot electrons.

Applied Physics Letters•Jan 17, 2011•77 citations
We present an experimental study of the intermediate frequency bandwidth of a Nb diffusion-cooled hot-electron bolometer mixer for different bias voltages. The measurements show that the bandwidth increases with increasing voltage. Analysis of the data reveals that this effect is mainly caused by a decrease of the intrinsic thermal time of the mixer and that the effect of electrothermal feedback through the intermediate frequency circuit is small. The results are understood using a qualitative model, which takes into account the different effective diffusion constants in the normal and superconducting domains.
We present an experimental study of the intermediate frequency bandwidth of a Nb diffusion-cooled hot-electron bolometer mixer for different bias voltages. The measurements show that the bandwidth increases with increasing voltage. Analysis of the data reveals that this effect is mainly caused by a decrease of the intrinsic thermal time constant of the mixer and that the effect of electrothermal feedback through the intermediate frequency circuit is small. The results are understood using a qualitative model, which takes into account the different effective diffusion constants in the normal and superconducting domains.
Response time of a Superconducting Hot Electron Bolometer (HEB) mixers is a critical parameter, and significantly affects the intermediate frequency (IF) gain bandwidth. In this study, we investigated the effects of temperature and bias voltage on the response time. Response time of superconducting niobium nitride (NbN) HEB mixers were measured by using the pumpprobe technique at temperatures of 5 K, 7 K, and 9 K with different bias voltages. The measured response time ranged from 50 to 80 ps and decreased with increasing temperature and bias voltage. This approach provides a more comprehensive understanding of the thermal transport mechanisms in superconducting HEB mixers, which can ultimately lead to improved performance and properties of the HEB mixers.
Diffusion-cooled Nb hot-electron bolometer (HEB) mixers have the potential to simultaneously achieve high intermediate frequency (IF) bandwidths and low mixer noise temperatures for operation at THz frequencies (above the superconductive gap energy). We have measured the IF signal bandwidth at 630 GHz of Nb devices with lengths L = 0.3, 0.2, and 0.1 micrometer in a quasioptical mixer configuration employing twin-slot antennas. The 3-dB EF bandwidth increased from 1.2 GHz for the 0.3 gm long device to 9.2 GHz for the 0.1 gm long device. These results demonstrate the expected 1/L squared dependence of the IF bandwidth at submillimeter wave frequencies for the first time, as well as the largest EF bandwidth obtained to date. For the 0.1 gm device, which had the largest bandwidth, the double sideband (DSB) noise temperature of the receiver was 320-470 K at 630 GHz with an absorbed LO power of 35 nW, estimated using the isothermal method. A version of this mixer with the antenna length scaled for operation at 2.5 THz has also been tested. A DSB receiver noise temperature of 1800 plus or minus 100 K was achieved, which is about 1,000 K lower than our previously reported results. These results demonstrate that large EF bandwidth and low-noise operation of a diffusion-cooled HEB mixer is possible at THz frequencies with the same device geometry.
We report a record double sideband noise temperature of 600 K (5hν/kB) offered by a NbN hot-electron bolometer receiver at 2.5 THz. Allowing for standing wave effects, this value was found to be constant in the intermediate frequency range 1–7 GHz, which indicates that the mixer has an unprecedentedly large noise bandwidth in excess of 7 GHz. The insight into this is provided by gain bandwidth measurements performed at the superconducting transition. They show that the dependence of the bandwidth on the mixer length follows the model for an HEB mixer with diffusion and phonon cooling of the hot electrons.