Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Construction and Characterization of a Sideband-separating heterodyne mixer for Band 9 of ALMA

Fausto Patricio Mena, J. Kooi, Andrey M. Baryshev, C. F. J. Lodewijk, T. M. Klapwijk, Ronald Hesper, W. Wild

Published Jan 1, 2007• 2 citations
OpenAlex

Abstract

In this article we present the design, modeling and construction of a side-band-separating (2SB) heterodyne receiver for the frequency range from 600 to 720 GHz that corresponds to band 9 band of ALMA. The characteristics of this receiver present a significant improvement over the current double-sideband (DSB) configuration currently under development. The core of the mixer consists of a quadrature hybrid, two LO injectors, two superconductor-insulator-superconductor (SIS) junctions, three signal-termination loads, and two IF filtering systems. All these parts were modeled and optimized prior construction. Our 2 mixer exploits waveguide technology and has been constructed in the split-block technique. We used state-of-the-art CNC micromachining which permitted us to obtain the small dimensions required for this frequency range. The constructed receiver presents a good performance but we suggest various ideas for further improvement.

Related papers

An SIS-based sideband-separating heterodyne mixer optimized for the 600 to 720 GHz band

Fausto Patricio Mena, J. Kooi, Andrey M. Baryshev +4 more

The Atacama Large Millimeter Array (ALMA) is the largest radio astronomical enterprise ever proposed. When completed, each of its 64 constituting radio-telescopes will be able to hold 10 heterodyne receivers covering the spectroscopic windows allowed by the atmospheric transmission at the construction site, the altiplanos of the northern Chilean Andes. In contrast to the sideband-separating (2SB) receivers being developed at low frequencies, double-side-band (DSB) receivers are being developed for the highest two spectroscopic windows (bands 9 and 10). Despite of the well known advantages of 2SB mixers over their DSB counterparts, they have not been implemented at the highest-frequency bands as the involved dimensions for some of the radio frequency components are prohibitory small. However, the current state-of-the-art micromachining technology has proved that the structures necessary for this development are attainable. Here we report the design, modeling, realization, and characterization of a 2SB mixer for band 9 of ALMA (600 to 720 GHz). At the heart of the mixer, two superconductor-insulator-superconductor (SIS) junctions are used as mixing elements. The constructed instrument presents an excellent performance as shown by two important figures of merit: noise temperature of the system and side band ratio, both of them within ALMA specifications.

Journal of Physics Conference Series•Feb 1, 2008•3 citations

Design and Performance of a 600–720-GHz Sideband-Separating Receiver Using ${\hbox{AlO}}_{x}$ and AlN SIS Junctions

Fausto Patricio Mena, J. Kooi, Andrey M. Baryshev +6 more

We present the design, modeling, construction, and characterization of a sideband separating heterodyne receiver that covers the frequency range from 600 to 720 GHz. The receiver has been constructed using waveguide technology in the split-block technique. The core of the mixer consists of a quadrature hybrid, two directional couplers to inject the local oscillator signal, two superconductor-insulator-superconductor (SIS) junctions, three signal-termination loads, and two planar IF/bandpass-filter/dc-bias circuits. The instrument that we have constructed presents excellent performance as demonstrated by two important figures of merit: receiver noise temperature and sideband ratio. Across the entire band, the uncorrected single-sideband noise temperature is below 500 K and reaches 190 K at the best operating point. The sideband ratio is greater than 10 dB over most of the frequency operating range. Superconducting junctions containing AlO∞- and AlN-tunnel barriers were tested.

IEEE Transactions on Microwave Theory and Techniques•Dec 9, 2010•20 citations

Design Of Dual Polarisation Sideband Separation Mixer For ALMA Band 5

Bhushan Billade

This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.

•Sep 1, 2009•1 citation

Design and Performance of a Sideband Separating SIS Mixer for 800–950 GHz

Andrey V. Khudchenko, M. Yu. Fominsky, Christopher Heiter +11 more

We present the design and results of characterization of a new sideband separating (2SB) mixer for 800-950 GHz, based on superconductor-insulator-superconductor (SIS) junctions. This is the first waveguide 2SB SIS mixer demonstrated at such a high frequency. The design is following the classical quadrature hybrid architecture, meanwhile additional attention was put on the reduction of reflections in the RF structure in order to minimize the RF imbalance, to achieve a high image rejection ratio (IRR). The RF waveguide block was manufactured by micromilling and populated by single-ended SIS mixers developed earlier for upgrade of the CHAMP+ high-band array on the APEX telescope. These SIS mixers have double-sideband (DSB) noise temperatures from 210 to 400 K. The assembled 2SB mixer yields a SSB noise temperature from 450 to 900 K, with an IRR above 15 dB in 95% of the band. Comparing the DSB and the SSB sensitivities, we find that the waveguide losses are as low as expected and do not exceed 0.6 dB. The presented mixer is a prototype for use in a 2SB dual polarization receiver planned for deployment on the APEX telescope.

IEEE Transactions on Terahertz Science and Technology•Sep 2, 2019•21 citations

Sideband Separating Mixer for atmospheric window 790-950 GHz

Andrey V. Khudchenko

We have developed a Sideband Separating (2SB) Mixer based on superconductor-insulator-superconductor (SIS) junctions for frequency range 790-950 GHz. In the first test this mixer demonstrated the noise temperature from 450 to 900 K and the image rejection ratio above 15dB in 95% of the band. The SIS mixers used here have DSB noise temperature form 220 to 400 K. These results show that RF waveguide hybrid structure for such a high frequencies can be manufactured with losses level below 0.8 dB. It makes attractive possible ALMA upgrade of Band 10 receivers to 2SB option, because the sensitivity for spectral lines observations can be improved by about 30% by using 2SB mixers instead of DSB ones.

•Jun 6, 2019•0 citations

Design and performance of mass-produced sideband separating SIS mixers for ALMA band 4 receivers

Takafumi Kojima, Koichi Kuroiwa, Toshikazu Takahashi +4 more

Abstract We have designed and mass-produced low-noise sideband separating superconductor–insulator–superconductor (SIS) mixers for the Atacama Large Millimeter/submillimeter Array (ALMA) band 4 over the frequency range of 125–163 GHz. An integrated design was adopted for the band 4 sideband separating (2SB) mixer block because of the advantages it offers in terms of compactness, reduced testing time and lower cost. The mixer chip was designed to be robust for handling errors to avoid performance degradation caused by generation of the higher order mode in the mixer chip slot. Detailed analyses revealed its robustness and ability to ensure mass production of the 2SB mixers. Using the robust mixer design in addition to well-established waveguide technologies, all of the 2SB mixers met ALMA specifications for noise temperature and image rejection ratio.

Superconductor Science and Technology•Jul 30, 2015•3 citations
In this article we present the design, modeling and construction of a side-band-separating (2SB) heterodyne receiver for the frequency range from 600 to 720 GHz that corresponds to band 9 band of ALMA. The characteristics of this receiver present a significant improvement over the current double-sideband (DSB) configuration currently under development. The core of the mixer consists of a quadrature hybrid, two LO injectors, two superconductor-insulator-superconductor (SIS) junctions, three signal-termination loads, and two IF filtering systems. All these parts were modeled and optimized prior construction. Our 2 mixer exploits waveguide technology and has been constructed in the split-block technique. We used state-of-the-art CNC micromachining which permitted us to obtain the small dimensions required for this frequency range. The constructed receiver presents a good performance but we suggest various ideas for further improvement.
The Atacama Large Millimeter Array (ALMA) is the largest radio astronomical enterprise ever proposed. When completed, each of its 64 constituting radio-telescopes will be able to hold 10 heterodyne receivers covering the spectroscopic windows allowed by the atmospheric transmission at the construction site, the altiplanos of the northern Chilean Andes. In contrast to the sideband-separating (2SB) receivers being developed at low frequencies, double-side-band (DSB) receivers are being developed for the highest two spectroscopic windows (bands 9 and 10). Despite of the well known advantages of 2SB mixers over their DSB counterparts, they have not been implemented at the highest-frequency bands as the involved dimensions for some of the radio frequency components are prohibitory small. However, the current state-of-the-art micromachining technology has proved that the structures necessary for this development are attainable. Here we report the design, modeling, realization, and characterization of a 2SB mixer for band 9 of ALMA (600 to 720 GHz). At the heart of the mixer, two superconductor-insulator-superconductor (SIS) junctions are used as mixing elements. The constructed instrument presents an excellent performance as shown by two important figures of merit: noise temperature of the system and side band ratio, both of them within ALMA specifications.
Design and Performance of a 600–720-GHz Sideband-Separating Receiver Using AlOx{\hbox{AlO}}_{x}AlOx​ and AlN SIS Junctions
We present the design, modeling, construction, and characterization of a sideband separating heterodyne receiver that covers the frequency range from 600 to 720 GHz. The receiver has been constructed using waveguide technology in the split-block technique. The core of the mixer consists of a quadrature hybrid, two directional couplers to inject the local oscillator signal, two superconductor-insulator-superconductor (SIS) junctions, three signal-termination loads, and two planar IF/bandpass-filter/dc-bias circuits. The instrument that we have constructed presents excellent performance as demonstrated by two important figures of merit: receiver noise temperature and sideband ratio. Across the entire band, the uncorrected single-sideband noise temperature is below 500 K and reaches 190 K at the best operating point. The sideband ratio is greater than 10 dB over most of the frequency operating range. Superconducting junctions containing AlO∞- and AlN-tunnel barriers were tested.
This licentiate is focused on the design and development of Superconductor-Insulator-Superconductor (SIS) junction mixer for ALMA Band 5, one of the ten frequency bands of the Atacama Large Millimeter Array (ALMA) project. ALMA Band 5 is a dual polarisation sideband separation heterodyne receiver covering radio frequencies (RF) from 163 GHz to 211 GHz, with 4-8 GHz intermediate frequency (IF). Amongst the other ALMA bands, Band 5 is the lowest frequency band, which uses all-cold optics. That puts strong constrains on the dimensions of all the receiver components. For the SIS mixer, we employ a MMIC-like approach where most of the DSB mixer components, including LO injection circuitry with novel directional coupler, are integrated on the same crystal quartz substrate. The mixer uses a lumped filter technique to extract the IF frequencies, which is non-traditional for SIS mixers. A custom made superconducting Lange coupler with suspended air bridges to connect the fingers of Lange coupler is used. Experimental measurements of the double sideband mixer show state of the art performance with the receiver noise temperature below 30 Kelvin across the entire band. The noise temperature for sideband separation mixer is below 60 Kelvin with sideband rejection better than 12 dB over most of the band.
We present the design and results of characterization of a new sideband separating (2SB) mixer for 800-950 GHz, based on superconductor-insulator-superconductor (SIS) junctions. This is the first waveguide 2SB SIS mixer demonstrated at such a high frequency. The design is following the classical quadrature hybrid architecture, meanwhile additional attention was put on the reduction of reflections in the RF structure in order to minimize the RF imbalance, to achieve a high image rejection ratio (IRR). The RF waveguide block was manufactured by micromilling and populated by single-ended SIS mixers developed earlier for upgrade of the CHAMP+ high-band array on the APEX telescope. These SIS mixers have double-sideband (DSB) noise temperatures from 210 to 400 K. The assembled 2SB mixer yields a SSB noise temperature from 450 to 900 K, with an IRR above 15 dB in 95% of the band. Comparing the DSB and the SSB sensitivities, we find that the waveguide losses are as low as expected and do not exceed 0.6 dB. The presented mixer is a prototype for use in a 2SB dual polarization receiver planned for deployment on the APEX telescope.
We have developed a Sideband Separating (2SB) Mixer based on superconductor-insulator-superconductor (SIS) junctions for frequency range 790-950 GHz. In the first test this mixer demonstrated the noise temperature from 450 to 900 K and the image rejection ratio above 15dB in 95% of the band. The SIS mixers used here have DSB noise temperature form 220 to 400 K. These results show that RF waveguide hybrid structure for such a high frequencies can be manufactured with losses level below 0.8 dB. It makes attractive possible ALMA upgrade of Band 10 receivers to 2SB option, because the sensitivity for spectral lines observations can be improved by about 30% by using 2SB mixers instead of DSB ones.
Abstract We have designed and mass-produced low-noise sideband separating superconductor–insulator–superconductor (SIS) mixers for the Atacama Large Millimeter/submillimeter Array (ALMA) band 4 over the frequency range of 125–163 GHz. An integrated design was adopted for the band 4 sideband separating (2SB) mixer block because of the advantages it offers in terms of compactness, reduced testing time and lower cost. The mixer chip was designed to be robust for handling errors to avoid performance degradation caused by generation of the higher order mode in the mixer chip slot. Detailed analyses revealed its robustness and ability to ensure mass production of the 2SB mixers. Using the robust mixer design in addition to well-established waveguide technologies, all of the 2SB mixers met ALMA specifications for noise temperature and image rejection ratio.