Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

中国物理B：英文版

Tuning an rf-SQUID flux qubit system＇s potential with magnetic flux bias

花涛, 许伟伟, 史建新, 安德越, 孙国柱, 于扬, 吴培亨

Published Jan 1, 2012• 0 citations
OpenAlex

Abstract

At an extremely low temperature of 20 mK, we measured the loop current in a tunable rf superconducting quantum interference device (SQUID) with a dc-SQUID. By adjusting the magnetic flux applied to the rf-SQUID loop (Φ f ) and the small dc-SQUID (Φ cjj f ), respectively, the potential shape of the system can be fully controlled in situ. Variation in the transition step and overlap size in the switching current with a barrier flux bias are analyzed, from which we can obtain some relevant device parameters and build a model to explain the experimental phenomenon.

Related papers

Tuning an rf-SQUID flux qubit system's potential with magnetic flux bias

Tao Hua, Weiwei Xu, Jianxin Shi +4 more

At an extremely low temperature of 20 mK, we measured the loop current in a tunable rf superconducting quantum interference device (SQUID) with a dc-SQUID. By adjusting the magnetic flux applied to the rf-SQUID loop ( Φ f ) and the small dc-SQUID ( Φ f cjj ), respectively, the potential shape of the system can be fully controlled in situ . Variation in the transition step and overlap size in the switching current with a barrier flux bias are analyzed, from which we can obtain some relevant device parameters and build a model to explain the experimental phenomenon.

Chinese Physics B•Sep 1, 2012•4 citations

Rapid single-flux quantum control of the energy potential in a double SQUID qubit circuit

Maria Gabriella Castellano, F. Chiarello, Roberto Leoni +6 more

We report on the development and test of an integrated system composed of a flux qubit and a rapid single-flux quantum (RSFQ) circuit that allows qubit manipulation. The goal is to demonstrate the feasibility of control electronics integrated on the same chip as the qubit, in view of the application in quantum computation with superconducting devices. RSFQ logic relies on the storage and transmission of magnetic flux quanta and can be profitably used with superconducting qubits because of the speed, scalability, compatibility with the qubit fabrication process and low temperature environment. While standard RSFQ circuitry is well assessed, the application to quantum computing requires a complete rescaling of parameter values, in order to preserve the qubit coherence and reduce the power dissipation. In the system presented in this paper, the qubit role is played by a superconducting loop interrupted by a small dc SQUID, usually called a double SQUID, which behaves as a tunable rf-SQUID. Its energy potential has the shape of a double well, with the barrier between the wells controlled by magnetic flux applied to the inner dc SQUID. Here for the first time we report measurements at a base temperature of 370 mK in which flux control pulses with desired characteristics were supplied by a RSFQ circuit fabricated using non-standard parameters in the same chip as the qubit.

Superconductor Science and Technology•May 3, 2007•16 citations

Tunable Superconducting Cavity using Superconducting Quantum Interference Device Metamaterials

Samuel Kim, David B. Shrekenhamer, K. McElroy +2 more

Abstract Here we consider a tunable superconducting cavity that can be used either as a tunable coupler to a qubit inside the cavity or as a tunable low noise, low temperature, RF filter. Our design consists of an array of radio-frequency superconducting quantum interference devices (rf SQUIDs) inside a superconducting cavity. This forms a tunable metamaterial structure which couples to the cavity through its magnetic plasma frequency. By tuning the resonant frequency of the metamaterial through an applied magnetic flux, one can tune the cavity mode profile. This allows us to detune the cavity initially centered at 5.593 GHz by over 200 MHz. The maximum quality factor approaches that of the empty cavity, which is 4.5 × 106. The metamaterial electromagnetic response is controlled via a low-frequency or dc magnetic flux bias, and we present a control line architecture that is capable of applying sufficient magnetic flux bias with minimal parasitic coupling. Together this design allows for an in-situ tunable cavity which enables low-temperature quantum control applications.

Scientific Reports•Mar 15, 2019•12 citations

Tracing the characteristics of a flux qubit with a hysteretic dc-superconducting quantum interference device comparator

Maria Gabriella Castellano, F. Chiarello, Roberto Leoni +6 more

A hysteretic dc-superconducting quantum interference device (SQUID) is used to trace the flux characteristic of a tunable rf-SQUID, the basic element for the realization of superconducting flux qubits. This allows important simplifications of circuitry and electronics in developing devices for quantum computing, by eliminating the necessity of more complex magnetometers. A hysteretic dc-SQUID is usually operated as a comparator, distinguishing only which one of two adjacent flux states is occupied by the rf-SQUID. The necessary sensitivity, moreover, is usually reached only at temperatures in the mK range. However, by exploiting the statistical properties of the current–voltage curve in the region where the switching from the zero-voltage state occurs, it is possible to obtain an accurate tracing of the input flux, even at a relatively high temperature (a few Kelvin). In our case, the input signal is given by the internal flux of a tunable rf-SQUID, the building block of a flux qubit.

Journal of Applied Physics•Dec 4, 2003•4 citations

Potential Characterization of a Double SQUID Device for Quantum Computing Experiments

F. Chiarello, P. Carelli, Maria Gabriella Castellano +8 more

We report on experiments performed on a system consisting of a double SQUID (Superconducting Quantum Interference Device) built with gradiometer geometry. Two single-turn coils provide two independent control fluxes: one of these allows biasing the device and tilting the potential, while the other changes the barrier height of the potential. When the dynamics of the inner dc SQUID can be neglected, the free energy of the double SQUID, as a function of the internal magnetic flux, is just the corrugated parabola of an rf SQUID whose local minima represent metastable states for the system. Our analysis instead is substantially concerned with the interesting phenomenology generated by the static configurations of an internal two-junction interferometer and by the tunability of the internal loop inductance. Two readout systems are employed to thoroughly characterize the dynamics of our system. We investigate the dynamical response at temperatures low enough (tens of mK) to minimize the effects of thermal fluctuations concentrating the analysis on the aspects that could be relevant for macroscopic quantum coherence and computing. The results indicate that from the finite inductance of the inner loop originates a potential well generating competing processes with the tunneling between the two main wells of the rf-SQUID potential.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•2 citations

Studies of Quantum Transitions of Magnetic Flux in a RF Squid Qubit

Luigi Longobardi

At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.

•Oct 22, 2010•0 citations
At an extremely low temperature of 20 mK, we measured the loop current in a tunable rf superconducting quantum interference device (SQUID) with a dc-SQUID. By adjusting the magnetic flux applied to the rf-SQUID loop (Φ f ) and the small dc-SQUID (Φ cjj f ), respectively, the potential shape of the system can be fully controlled in situ. Variation in the transition step and overlap size in the switching current with a barrier flux bias are analyzed, from which we can obtain some relevant device parameters and build a model to explain the experimental phenomenon.
At an extremely low temperature of 20 mK, we measured the loop current in a tunable rf superconducting quantum interference device (SQUID) with a dc-SQUID. By adjusting the magnetic flux applied to the rf-SQUID loop ( Φ f ) and the small dc-SQUID ( Φ f cjj ), respectively, the potential shape of the system can be fully controlled in situ . Variation in the transition step and overlap size in the switching current with a barrier flux bias are analyzed, from which we can obtain some relevant device parameters and build a model to explain the experimental phenomenon.
We report on the development and test of an integrated system composed of a flux qubit and a rapid single-flux quantum (RSFQ) circuit that allows qubit manipulation. The goal is to demonstrate the feasibility of control electronics integrated on the same chip as the qubit, in view of the application in quantum computation with superconducting devices. RSFQ logic relies on the storage and transmission of magnetic flux quanta and can be profitably used with superconducting qubits because of the speed, scalability, compatibility with the qubit fabrication process and low temperature environment. While standard RSFQ circuitry is well assessed, the application to quantum computing requires a complete rescaling of parameter values, in order to preserve the qubit coherence and reduce the power dissipation. In the system presented in this paper, the qubit role is played by a superconducting loop interrupted by a small dc SQUID, usually called a double SQUID, which behaves as a tunable rf-SQUID. Its energy potential has the shape of a double well, with the barrier between the wells controlled by magnetic flux applied to the inner dc SQUID. Here for the first time we report measurements at a base temperature of 370 mK in which flux control pulses with desired characteristics were supplied by a RSFQ circuit fabricated using non-standard parameters in the same chip as the qubit.
Abstract Here we consider a tunable superconducting cavity that can be used either as a tunable coupler to a qubit inside the cavity or as a tunable low noise, low temperature, RF filter. Our design consists of an array of radio-frequency superconducting quantum interference devices (rf SQUIDs) inside a superconducting cavity. This forms a tunable metamaterial structure which couples to the cavity through its magnetic plasma frequency. By tuning the resonant frequency of the metamaterial through an applied magnetic flux, one can tune the cavity mode profile. This allows us to detune the cavity initially centered at 5.593 GHz by over 200 MHz. The maximum quality factor approaches that of the empty cavity, which is 4.5 × 106. The metamaterial electromagnetic response is controlled via a low-frequency or dc magnetic flux bias, and we present a control line architecture that is capable of applying sufficient magnetic flux bias with minimal parasitic coupling. Together this design allows for an in-situ tunable cavity which enables low-temperature quantum control applications.
A hysteretic dc-superconducting quantum interference device (SQUID) is used to trace the flux characteristic of a tunable rf-SQUID, the basic element for the realization of superconducting flux qubits. This allows important simplifications of circuitry and electronics in developing devices for quantum computing, by eliminating the necessity of more complex magnetometers. A hysteretic dc-SQUID is usually operated as a comparator, distinguishing only which one of two adjacent flux states is occupied by the rf-SQUID. The necessary sensitivity, moreover, is usually reached only at temperatures in the mK range. However, by exploiting the statistical properties of the current–voltage curve in the region where the switching from the zero-voltage state occurs, it is possible to obtain an accurate tracing of the input flux, even at a relatively high temperature (a few Kelvin). In our case, the input signal is given by the internal flux of a tunable rf-SQUID, the building block of a flux qubit.
We report on experiments performed on a system consisting of a double SQUID (Superconducting Quantum Interference Device) built with gradiometer geometry. Two single-turn coils provide two independent control fluxes: one of these allows biasing the device and tilting the potential, while the other changes the barrier height of the potential. When the dynamics of the inner dc SQUID can be neglected, the free energy of the double SQUID, as a function of the internal magnetic flux, is just the corrugated parabola of an rf SQUID whose local minima represent metastable states for the system. Our analysis instead is substantially concerned with the interesting phenomenology generated by the static configurations of an internal two-junction interferometer and by the tunability of the internal loop inductance. Two readout systems are employed to thoroughly characterize the dynamics of our system. We investigate the dynamical response at temperatures low enough (tens of mK) to minimize the effects of thermal fluctuations concentrating the analysis on the aspects that could be relevant for macroscopic quantum coherence and computing. The results indicate that from the finite inductance of the inner loop originates a potential well generating competing processes with the tunneling between the two main wells of the rf-SQUID potential.
At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.