Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Clock-transition spectrum of171Yb atoms in a one-dimensional optical lattice

Ning Chen, Min Zhou, Hai-Qin Chen, Su Fang, Liangyu Huang, Xiaohang Zhang, Qi Gao, Yan-Yi Jiang, Zhiyi Bi, Long-Sheng Ma, Xinye Xu

Published Sep 1, 2013• 14 citations
Publisher

Abstract

An optical atomic clock with 171 Yb atoms is devised and tested. By using a two-stage Doppler cooling technique, the 171 Yb atoms are cooled down to a temperature of 6±3 μK, which is close to the Doppler limit. Then, the cold 171 Yb atoms are loaded into a one-dimensional optical lattice with a wavelength of 759 nm in the Lamb—Dicke regime. Furthermore, these cold 171 Yb atoms are excited from the ground-state 1 S 0 to the excited-state 3 P 0 by a clock laser with a wavelength of 578 nm. Finally, the 1 S 0 – 3 P 0 clock-transition spectrum of these 171 Yb atoms is obtained by measuring the dependence of the population of the ground-state 1 S 0 upon the clock-laser detuning.

DOI
10.1088/1674-1056/22/9/090601

Related papers

Hertz-Level Clock Spectroscopy of 171 Yb Atoms in a One-Dimensional Optical Lattice

Meng-Jiao Zhang, Hui Liu, Xi Zhang +4 more

An ultra-narrow spectroscopy of clock transition with high signal-to-noise ratio is crucial for a high-performance atomic optical clock. We present a detailed study about how to obtain a Hertz-level clock transition spectrum of 171 Yb atoms. About 4 × 10 4 atoms are loaded into a one-dimensional optical lattice with a magic wavelength of 759 nm, and a long lifetime of 3 s is realized with the lattice power of 1 W. Through normalized shelving detection and spin polarization, 171 Yb clock spectroscopy with a Fourier-limited linewidth of 5.9 Hz is obtained. Our work represents a key step toward an ytterbium optical clock with high frequency stability.

Chinese Physics Letters•Jul 1, 2016•7 citations

Experiments on trapping ytterbium atoms in optical lattices

Min Zhou, Ning Chen, Xiaohang Zhang +7 more

Experiments on trapping ytterbium atoms in various optical lattices are presented. After the two-stage cooling, first in a blue magneto—optical trap and then in a green magneto—optical trap, the ultracold 171 Yb atoms are successfully loaded into one-, two-, and three-dimensional optical lattices operating at the Stark-free wavelength, respectively. The temperature, number, and lifetime of cold 171 Yb atoms in one-dimensional lattice are measured. After optimization, the one-dimensional lattice with cold 171 Yb atoms is used for developing an ytterbium optical clock.

Chinese Physics B•Oct 1, 2013•14 citations

Experimental research on loading strontium bosons into the optical lattice operating at the “magic” wavelength

Tian Xiao, Wang Ye-Bing, Lu Ben-Quan +7 more

The optical lattice clock with neutral atoms occupies an outstanding position in the research field of atomic clocks, demonstrating the great potential of its performance (like the uncertainty and the stability). At present, the optical lattice clock has realized a 10-18 level of its uncertainty. In this paper, we present the realization of loading bosonic atoms 88Sr (strontium, alkaline-earth metals) into a one-dimensional (1D) optical lattice in our laboratory. The optical lattice where the atoms are trapped can make the energy level shift, called Stark shift. But there is the special optical lattice operating at the “magic” wavelength for clock transitions (5s2) 1S0-(5s5p) 3P0, which can make the same Stark light-shift for both of them, indicating a zero light-shift relative to the clock. In our experiment, Sr atoms are cooled in a two-stage cooling and its temperature can be as low as 2 μK. Then these cold atoms are confined in the Lamb-Dicke region by the lattice laser output from an amplified diode laser operating at the “magic” wavelength, 813 nm. Experimentally, it is straightforward to provide 850 mW of lattice power focused to a 38 μm beam radius. After the cold atoms have trapped in the optical lattice, the lifetime of atoms in 1D optical lattice is measured to be 270 ms. The temperature and the number are about 3.5 μK and 1.2×105 respectively. Besides, effects of the power of the lattice laser on both the number and temperature are analyzed. The number changes linearly with the laser power, while there is no obvious influence on the temperature by the power. This original and special approach for atoms trapped in the optical lattice can provide a long interrogation time for probing the clock transition. Furthermore, it may be the foundation for developing our optical lattice clock of strontium atoms.

Acta Physica Sinica•Jan 1, 2015•0 citations

Setup of a Transportable Yb Optical Lattice Clock

C. Abou-Jaoudeh

In this thesis, a transportable setup of an Yb atomic source for a lattice optical clock is built and characterized. All three laser setups for cooling and trapping the Yb atoms, together with the vacuum system, are contained on a transportable optical table. The preparation of the atomic sample before doing spectroscopy on the clock transition starts by slowing the atoms in the Zeeman slower. This is followed by trapping the atoms in the pre-cooling and the post-cooling MOTs, before loading the atoms into the optical lattice. Slowing and pre-cooling the atoms is done using the strong transition at 399 nm. This cools the atoms down to around a mK. To successfully load the atoms in the optical lattice, we have to cool the atoms further to beyond 50 μK. This is done by exciting the weak transition at 556 nm. The atoms that are transferred into the post-cooling stage are cooled down to a few tens of μK. The atoms are then ready to be loaded into the optical lattice at the magic wavelength. The amplified laser light at 760 nm inside the 1-D intra-vacuum cavity results in a lattice trapping potential of approximately 50 μK. A transfer efficiency, from the MOT into the optical lattice, of more than 25% was measured. The spectroscopy on the clock transition was done for 171Yb. A step-by-step mechanism was adopted, starting by exciting the forbidden transition at 578 nm inside the post-cooling stage MOT, by using the ”chopped-MOT” method. The 300 kHz Doppler-broadened line is then narrowed down to 3 kHz by switching on the light at 760 nm, while keeping the MOT on. The so-called ”chopped-lattice” technique helped suppress the Doppler-broadening; however the other effects due to the light and the magnetic fields of the MOT were still present. By switching off the MOT’s light and magnetic fields, the Yb atoms are completely trapped in the optical lattice. As a result, the FWHM of the spectroscopy line was reduced by a factor of 10.

•Jan 1, 2016•0 citations

Rabi spectroscopy of the clock transition in thulium atoms in a one-dimensional optical lattice

E.S. Fedorova, Dmitry O. Tregubov, Artem A. Golovizin +5 more

Abstract The clock transition at a wavelength of 1.14 μm in thulium atoms in an optical lattice in the Lamb – Dick regime is studied. The capture of thulium atoms makes it possible to suppress completely both the transition broadening due to the first-order Doppler effect and the shift of the transition frequency caused by the recoil effect. The excitation spectra of sideband oscillation frequencies and Rabi oscillations of population between the clock transition levels upon resonance excitation are investigated.

Quantum Electronics•Mar 1, 2020•6 citations

Absolute frequency measurements of the /sup 1/S/sub 0/-/sup 3/P/sub 0/ optical clock transition at 578 nm in neutral Yb

Chris W. Oates, Chad Hoyt, Zeb W. Barber +3 more

This work has focused on two atoms, Sr and Yb, due in part to the relatively high abundance of their odd isotopes, the use of which is necessary for appreciable direct excitation probability. The Sr clock transition has been measured (with an uncertainty of 20 kHz) using atoms in a magneto-optic trap (MOT), and has been excited with atoms confined in a one dimensional lattice. Here we report direct excitation of the Yb clock transition (at 578 nm) with atoms in a second-stage MOT, and the first fs-laser comb-based absolute measurements of the clock frequency for two different isotopes. These measurements lead to a nearly millionfold improvement in our knowledge of the transition frequencies, an important step toward Doppler-free spectroscopy of Yb atoms in a lattice.

IEEE/LEOS Summer Topical Meetings•Nov 8, 2005•0 citations
An optical atomic clock with 171 Yb atoms is devised and tested. By using a two-stage Doppler cooling technique, the 171 Yb atoms are cooled down to a temperature of 6±3 μK, which is close to the Doppler limit. Then, the cold 171 Yb atoms are loaded into a one-dimensional optical lattice with a wavelength of 759 nm in the Lamb—Dicke regime. Furthermore, these cold 171 Yb atoms are excited from the ground-state 1 S 0 to the excited-state 3 P 0 by a clock laser with a wavelength of 578 nm. Finally, the 1 S 0 – 3 P 0 clock-transition spectrum of these 171 Yb atoms is obtained by measuring the dependence of the population of the ground-state 1 S 0 upon the clock-laser detuning.
An ultra-narrow spectroscopy of clock transition with high signal-to-noise ratio is crucial for a high-performance atomic optical clock. We present a detailed study about how to obtain a Hertz-level clock transition spectrum of 171 Yb atoms. About 4 × 10 4 atoms are loaded into a one-dimensional optical lattice with a magic wavelength of 759 nm, and a long lifetime of 3 s is realized with the lattice power of 1 W. Through normalized shelving detection and spin polarization, 171 Yb clock spectroscopy with a Fourier-limited linewidth of 5.9 Hz is obtained. Our work represents a key step toward an ytterbium optical clock with high frequency stability.
Experiments on trapping ytterbium atoms in various optical lattices are presented. After the two-stage cooling, first in a blue magneto—optical trap and then in a green magneto—optical trap, the ultracold 171 Yb atoms are successfully loaded into one-, two-, and three-dimensional optical lattices operating at the Stark-free wavelength, respectively. The temperature, number, and lifetime of cold 171 Yb atoms in one-dimensional lattice are measured. After optimization, the one-dimensional lattice with cold 171 Yb atoms is used for developing an ytterbium optical clock.
The optical lattice clock with neutral atoms occupies an outstanding position in the research field of atomic clocks, demonstrating the great potential of its performance (like the uncertainty and the stability). At present, the optical lattice clock has realized a 10-18 level of its uncertainty. In this paper, we present the realization of loading bosonic atoms 88Sr (strontium, alkaline-earth metals) into a one-dimensional (1D) optical lattice in our laboratory. The optical lattice where the atoms are trapped can make the energy level shift, called Stark shift. But there is the special optical lattice operating at the “magic” wavelength for clock transitions (5s2) 1S0-(5s5p) 3P0, which can make the same Stark light-shift for both of them, indicating a zero light-shift relative to the clock. In our experiment, Sr atoms are cooled in a two-stage cooling and its temperature can be as low as 2 μK. Then these cold atoms are confined in the Lamb-Dicke region by the lattice laser output from an amplified diode laser operating at the “magic” wavelength, 813 nm. Experimentally, it is straightforward to provide 850 mW of lattice power focused to a 38 μm beam radius. After the cold atoms have trapped in the optical lattice, the lifetime of atoms in 1D optical lattice is measured to be 270 ms. The temperature and the number are about 3.5 μK and 1.2×105 respectively. Besides, effects of the power of the lattice laser on both the number and temperature are analyzed. The number changes linearly with the laser power, while there is no obvious influence on the temperature by the power. This original and special approach for atoms trapped in the optical lattice can provide a long interrogation time for probing the clock transition. Furthermore, it may be the foundation for developing our optical lattice clock of strontium atoms.
In this thesis, a transportable setup of an Yb atomic source for a lattice optical clock is built and characterized. All three laser setups for cooling and trapping the Yb atoms, together with the vacuum system, are contained on a transportable optical table. The preparation of the atomic sample before doing spectroscopy on the clock transition starts by slowing the atoms in the Zeeman slower. This is followed by trapping the atoms in the pre-cooling and the post-cooling MOTs, before loading the atoms into the optical lattice. Slowing and pre-cooling the atoms is done using the strong transition at 399 nm. This cools the atoms down to around a mK. To successfully load the atoms in the optical lattice, we have to cool the atoms further to beyond 50 μK. This is done by exciting the weak transition at 556 nm. The atoms that are transferred into the post-cooling stage are cooled down to a few tens of μK. The atoms are then ready to be loaded into the optical lattice at the magic wavelength. The amplified laser light at 760 nm inside the 1-D intra-vacuum cavity results in a lattice trapping potential of approximately 50 μK. A transfer efficiency, from the MOT into the optical lattice, of more than 25% was measured. The spectroscopy on the clock transition was done for 171Yb. A step-by-step mechanism was adopted, starting by exciting the forbidden transition at 578 nm inside the post-cooling stage MOT, by using the ”chopped-MOT” method. The 300 kHz Doppler-broadened line is then narrowed down to 3 kHz by switching on the light at 760 nm, while keeping the MOT on. The so-called ”chopped-lattice” technique helped suppress the Doppler-broadening; however the other effects due to the light and the magnetic fields of the MOT were still present. By switching off the MOT’s light and magnetic fields, the Yb atoms are completely trapped in the optical lattice. As a result, the FWHM of the spectroscopy line was reduced by a factor of 10.
Abstract The clock transition at a wavelength of 1.14 μm in thulium atoms in an optical lattice in the Lamb – Dick regime is studied. The capture of thulium atoms makes it possible to suppress completely both the transition broadening due to the first-order Doppler effect and the shift of the transition frequency caused by the recoil effect. The excitation spectra of sideband oscillation frequencies and Rabi oscillations of population between the clock transition levels upon resonance excitation are investigated.
This work has focused on two atoms, Sr and Yb, due in part to the relatively high abundance of their odd isotopes, the use of which is necessary for appreciable direct excitation probability. The Sr clock transition has been measured (with an uncertainty of 20 kHz) using atoms in a magneto-optic trap (MOT), and has been excited with atoms confined in a one dimensional lattice. Here we report direct excitation of the Yb clock transition (at 578 nm) with atoms in a second-stage MOT, and the first fs-laser comb-based absolute measurements of the clock frequency for two different isotopes. These measurements lead to a nearly millionfold improvement in our knowledge of the transition frequencies, an important step toward Doppler-free spectroscopy of Yb atoms in a lattice.