Quantum gates for superconducting qubits

Mark E. Saffman, Frank K. Wilhelm, R. McDermott

Yosep Kim, Alexis Morvan, Long B. Nguyen +6 more

The development of noisy intermediate-scale quantum (NISQ) devices has extended the scope of executable quantum circuits with high-fidelity single- and two-qubit gates. Equipping NISQ devices with three-qubit gates will enable the realization of more complex quantum algorithms and efficient quantum error correction protocols with reduced circuit depth. Several three-qubit gates have been implemented for superconducting qubits, but their use in gate synthesis has been limited due to their low fidelity. Here, using fixed-frequency superconducting qubits, we demonstrate a high-fidelity iToffoli gate based on two-qubit interactions, the so-called cross-resonance effect. As with the Toffoli gate, this three-qubit gate can be used to perform universal quantum computation. The iToffoli gate is implemented by simultaneously applying microwave pulses to a linear chain of three qubits, revealing a process fidelity as high as 98.26(2)%. Moreover, we numerically show that our gate scheme can produce additional three-qubit gates which provide more efficient gate synthesis than the Toffoli and Toffoli gates. Our work not only brings a high-fidelity iToffoli gate to current superconducting quantum processors but also opens a pathway for developing multi-qubit gates based on two-qubit interactions.

Allen, Joseph

Superconducting circuits are one of the leading architectures in quantum computing. To undertake quantum computing one must be able to perform quantum gates; however, two-qubit gates are still limited in fidelity and gate time. The cross-resonance gate is a two-qubit gate that uses direct microwave drives and has seen much success in its implementation; but, there are theoretical indications that it has not yet reached the coherence limited fidelity value and its gate time is still relatively long compared with other quantum gate methods. Quantum optimal control theory is a powerful tool in the design of controls for quantum operations and has shown the capability to improve gate fidelities and reduce gate times. Robust quantum optimal control methodologies have further built on this to develop high fidelity quantum gates that are robust to uncertainties and noise in the system. In this thesis we use robust quantum optimal control theory to achieve these goals for the cross-resonance gate in a variety of superconducting qubit architectures. First, we investigate two superconducting qubits embedded in a common 3D microwave cavity in which the control drive is implemented via the common cavity mode of the cavity. We determine pulse shapes that implement the cross-resonance gate that are robust to uncertainty in the qubit transition frequencies for both a strictly two-level superconducting qubit and a three-level qubit. Second, we look at the cross-resonance gate with direct drives on each qubit, finding the minimal time to perform the cross-resonance gate with pulses that are robust to uncertainty in a measured system parameter for three cases: two three-level qubits with no drive crosstalk, two three-level qubits with some drive crosstalk, and two two-level qubits. Lastly, we report on simulations undertaken towards implementing a robust, high fidelity cross-resonance gate in a novel superconducting quantum device known as the coaxmon.

Matthias Steffen, R. McDermott, Ken B. Cooper +7 more

Aneirin J. Baker, Gerhard B. P. Huber, Niklas J. Glaser +4 more

Quantum algorithms often benefit from the ability to execute multi-qubit (>2) gates. To date, such multi-qubit gates are typically decomposed into single- and two-qubit gates, particularly in superconducting qubit architectures. The ability to perform multi-qubit operations in a single step could vastly improve the fidelity and execution time of many algorithms. Here, we propose a single shot method for executing an i-Toffoli gate, a three-qubit gate with two control and one target qubit, using currently existing superconducting hardware. We show numerical evidence for a process fidelity over 99.5% and a gate time of 450 ns for superconducting qubits interacting via tunable couplers. Our method can straight forwardly be extended to implement gates with more than two control qubits at similar fidelities.

Peter Brooks, John P. Preskill