Quantum computers have been shown to efficiently solve a class of problems for which no efficient solution is otherwise known. Physical systems can implement quantum computation, but devising realistic schemes is an extremely challenging problem largely due to the effect of noise. A quantum computer that is capable of correctly solving problems more rapidly than modern digital computers requires some use of so-called fault-tolerant components. Code-based fault-tolerance using quantum error-correcting codes is one of the most promising and versatile of the known routes for fault-tolerant quantum computation. This dissertation presents three main, new results about code-based fault-tolerant quantum computer architectures.
The first result is a large new family of quantum codes that go beyond stabilizer codes, the most well-studied family of quantum codes. Our new family of codeword stabilized codes contains all known codes with optimal parameters. Furthermore, we show how to systematically find, construct, and understand such codes as a pair of codes: an additive quantum code and a classical (nonlinear) code.
Second, we resolve an open question about universality of so-called transversal gates acting on stabilizer codes. Such gates are universal for classical fault-tolerant computation, but they were conjectured to be insufficient for universal fault-tolerant quantum computation. We show that transversal gates have a restricted form and prove that some important families of them cannot be quantum universal. This is strong evidence that so-called quantum software is necessary to achieve universality, and, therefore, fault-tolerant quantum computer architecture is fundamentally different from classical computer architecture.
Finally, we partition the fault-tolerant design problem into levels of a hierarchy of concatenated codes and present methods, compatible with rigorous threshold theorems, for numerically evaluating these codes. The methods are applied to measure inner error-correcting code performance, as a first step toward elucidation of an effective fault-tolerant quantum computer architecture that uses no more than a physical, inner, and outer level of coding. Of the inner codes, the Golay code gives the highest pseudothreshold of 2 × 10-3. A comparison of logical error rate and overhead shows that the Bacon-Shor codes are competitive with Knill's C 4/C6 scheme at a base error rate of 10 -4. (Copies available exclusively from MIT Libraries, Rm. 14-0551, Cambridge, MA 02139-4307. Ph. 617-253-5668; Fax 617-253-1690.)
Quantum computers have been shown to efficiently solve a class of problems for which no efficient solution is otherwise known. Physical systems can implement quantum computation, but devising realistic schemes is an extremely challenging problem largely due to the effect of noise. A quantum computer that is capable of correctly solving problems more rapidly than modern digital computers requires some use of so-called fault-tolerant components. Code-based fault-tolerance using quantum error-correcting codes is one of the most promising and versatile of the known routes for fault-tolerant quantum computation. This dissertation presents three main, new results about code-based fault-tolerant quantum computer architectures.
The first result is a large new family of quantum codes that go beyond stabilizer codes, the most well-studied family of quantum codes. Our new family of codeword stabilized codes contains all known codes with optimal parameters. Furthermore, we show how to systematically find, construct, and understand such codes as a pair of codes: an additive quantum code and a classical (nonlinear) code.
Second, we resolve an open question about universality of so-called transversal gates acting on stabilizer codes. Such gates are universal for classical fault-tolerant computation, but they were conjectured to be insufficient for universal fault-tolerant quantum computation. We show that transversal gates have a restricted form and prove that some important families of them cannot be quantum universal. This is strong evidence that so-called quantum software is necessary to achieve universality, and, therefore, fault-tolerant quantum computer architecture is fundamentally different from classical computer architecture.
Finally, we partition the fault-tolerant design problem into levels of a hierarchy of concatenated codes and present methods, compatible with rigorous threshold theorems, for numerically evaluating these codes. The methods are applied to measure inner error-correcting code performance, as a first step toward elucidation of an effective fault-tolerant quantum computer architecture that uses no more than a physical, inner, and outer level of coding. Of the inner codes, the Golay code gives the highest pseudothreshold of 2 × 10-3. A comparison of logical error rate and overhead shows that the Bacon-Shor codes are competitive with Knill's C 4/C6 scheme at a base error rate of 10 -4. (Copies available exclusively from MIT Libraries, Rm. 14-0551, Cambridge, MA 02139-4307. Ph. 617-253-5668; Fax 617-253-1690.)
Quantum error correction is the backbone of fault-tolerant quantum computation, a necessary requirement for any large scale quantum computer. The fault-tolerance threshold theorem has long been a target for experimental precision, allowing for the possibility of reducing logical error rates to arbitrarily low levels without excessive overhead. While there are many promising fault-tolerant architectures, the path towards the most practical fault-tolerant scheme is far from decided and may vary for differing physical models. This thesis proposes new schemes for universal fault-tolerant quantum computation in both the concatenated and topological code settings. \n \nThrough the concatenation of two different error correcting codes, a set of universal fault-tolerant gates can be obtained without requiring the need for magic state distillation. A lower bound of 1.28times10−3 for the fault-tolerance threshold under circuit level depolarizing noise is obtained. Additionally, stacked codes are proposed as a means to simulate the action of a 3D topological code in 2D, allowing for the application of a universal set of transversal operations. While fault-tolerant, unfortunately the scheme does not exhibit a threshold due to the decreasing pseudo-threshold with growing code distance, yet points to potential interesting avenues for fault-tolerant computation in 2D without distillation. \n \nOne of the primary avenues to constructing fault-tolerant logical operations is through transversal operations. In this thesis, the set of single qubit logical gates that can be implemented transversally are characterized and determined to all belong to the Clifford hierarchy. Moreover, any diagonal two-qubit operation that can be applied transversally must belong to the same level of the Clifford hierarchy as the set of gates that can be implemented in the single-qubit case. \n \nThe opposite to quantum error correction is privacy, where the output of a channel is disguised from its input. The two are fundamentally related through the complementary channel construction. This thesis presents a new class of private quantum channels, expanding the existing class beyond a seemingly fundamental restriction. This yields interesting insights into the structure of quantum information and the leaking of information to external environments. Additionally, the duality is only recovered when extending the complementary channel to sufficiently high environmental dimension. \n \nFinally, the error properties of bucket brigade quantum Random Access Memory (qRAM) are assessed. It is determined that using the bucket brigade qRAM architecture for the running of Grover's algorithm necessitates reducing the error rate of the individual components to exponentially small levels for an exponential sized memory. As such, fault-tolerant architectures will likely play an essential role in the construction of such computing primitives.
The quantum logic gates used in the design of a quantum computer should be both universal, meaning arbitrary quantum computations can be performed, and fault-tolerant, meaning the gates keep errors from cascading out of control. A number of no-go theorems constrain the ways in which a set of fault-tolerant logic gates can be universal. These theorems are very restrictive, and conventional wisdom holds that a universal fault-tolerant logic gate set cannot be implemented natively, requiring us to use costly distillation procedures for quantum computation. Here, we present a general framework for universal fault-tolerant logic with stabilizer codes, together with a no-go theorem that reveals the very broad conditions constraining such gate sets. Our theorem applies to a wide range of stabilizer code families, including concatenated codes and conventional topological stabilizer codes such as the surface code. The broad applicability of our no-go theorem provides a new perspective on how the constraints on universal fault-tolerant gate sets can be overcome. In particular, we show how nonunitary implementations of logic gates provide a general approach to circumvent the no-go theorem, and we present a rich landscape of constructions for logic gate sets that are both universal and fault-tolerant. That is, rather than restricting what is possible, our no-go theorem provides a signpost to guide us to new, efficient architectures for fault-tolerant quantum computing.
This thesis is concerned with fault-tolerant quantum information processing using quantum error-correcting codes. It contains two major pieces of work. The first is a study of coherent noise in the context of stabilizer error-correcting codes. The second is a proposed scheme for a universal set of fault-tolerant logical gates in a particular code family built out of the 3D toric code. Chapter 1 provides an introduction to quantum computation and fault tolerance. Many basic concepts in error-correcting codes are defined. Special attention is paid to the set of code properties that are most likely to determine how easily a given fault-tolerant scheme might be implemented on a physical device. These include the fault-tolerant noise threshold and the overhead. In Chapters 2 and 3 we study the effectiveness of quantum error correction against coherent noise. Coherent errors (for example, unitary noise) can interfere constructively, so that in some cases the average infidelity of a quantum circuit subjected to coherent errors may increase quadratically with the circuit size; in contrast, when errors are incoherent (for example, depolarizing noise), the average infidelity increases at worst linearly with circuit size. We consider the performance of quantum stabilizer codes against a noise model in which a unitary rotation is applied to each qubit, where the axes and angles of rotation are nearly the same for all qubits. In Chapter 2 we introduce coherent noise and incoherent noise and a number of methods that are useful for the study of coherent noise. We study the repetition code as a basic example, and we also study a correlated noise model. In Chapter 3 we show that for the toric code subject to such independent coherent noise, and for minimal-weight decoding, the logical channel after error correction becomes increasingly incoherent as the length of the code increases, provided the noise strength decays inversely with the code distance. A similar conclusion holds for weakly correlated coherent noise. Our methods can also be used for analyzing the performance of other codes and fault-tolerant protocols against coherent noise. However, our result does not show that the coherence of the logical channel is suppressed in the more physically relevant case where the noise strength is held constant as the code block grows, and we recount the difficulties that prevented us from extending the result to that case. Nevertheless our work supports the idea that fault-tolerant quantum computing schemes will work effectively against coherent noise, providing encouraging news for quantum hardware builders who worry about the damaging effects of control errors and coherent interactions with the environment. Chapter 4 is connected to another aspect of fault tolerance, fault-tolerant logical gates. The toric code is a promising candidate for fault-tolerant quantum computation because of its high threshold and low-weight stabilizers. A universal gate set in the toric code generally requires magic state distillation, which can incur a significant qubit overhead. In this work we construct an error-correcting code in three dimensions based on the toric code that features a fault-tolerant T gate with no magic state distillation required. We further describe a subsystem version of our code which supports a universal set of fault-tolerant gates. This code can be converted into the stabilizer version using gauge-fixing. We also argue that our code can be converted to a (2+1)-D protocol, where a 2D lattice undergoes a measurement-based protocol over time. In this way, a fault-tolerant logical T gate can be realized in a 2D toric code structure.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit.
We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.
Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.
Fault-tolerant quantum computation allows quantum computations to be carried out while resisting unwanted noise. Several error-correcting codes have been developed to achieve this task, but none alone are capable of transversal universal quantum computation. This universality is highly desired and often achieved using techniques such as code concatenation, code switching, magic state distillation, or pieceable fault tolerance. Existing constructions can incur substantial overhead or rely on properties specific to particular codes. This work proposes implementing logical Clifford and T gates through novel, ancilla-mediated, pieceable interactions to construct a universal fault-tolerant quantum gate set. Our construction is deterministic, does not modify the underlying data codes or registers, and is generic over all data stabilizer codes. Thus, any single code becomes capable of universal quantum computation by leveraging helper codes in ancilla registers and mid-circuit measurements. Furthermore, since these logical gates are stabilizer code-generic, these implementations enable communication between heterogeneous stabilizer codes.