The Testing of Superconductive ADCs in a Software-Defined Radio Base Stations

Abhishek Arun, Hans G. Kerkhoff, Marcel H.H. Weusthof

Published Nov 29, 2001• 1 citation

Abstract

Software-Defined Radio (SDR), as explained in [1], is a promising concept for the wireless communication industry since the entire transceiver function can be implemented in software, avoiding the replacement of hardware each time the system has to be upgraded. However, the practical implementation of such a system is depended on the hardware, which consists of precise, ultra highspeed electronic devices such as Analog-to-Digital Converters (ADCs). The present state-of-the-art semiconductor ADCs cannot be used for the implementation of SDR in the near future [2]. Some of the factors that hamper the implementation are the requirements of very high speed of a few tens of GHz and the high resolution (e.g. 16 bits) at these speeds. On the other hand, using the Low-Temperature Superconducting (LTS) technology [3], which relays on the quantum mechanical property of superconductors, very high-speed electronic devices with the accuracy of a flux quantum, can be constructed. In a closed superconducting loop, the magnetic flux can exist only in discrete quantized amounts equal to the multiples of the magnetic flux quantum, φ0 = h/2e ~ 2.07x10 Wb. The theoretical speed limit of such a Rapid Single Flux Quantum (RSFQ) device is close to 1 THz [4]. These RSFQ circuits are the fastest of all devices built in any known technology. The basic building block of an RSFQ circuit is the Josephson Junction (JJ), which is formed when two superconductors are separated by an interface. Since RSFQ circuits work at extremely high speeds, testing and verification of such a device is a difficult and challenging task. Direct testing at these speeds is not possible at this moment. Furthermore, the costs of the equipment required for such tests would be extremely high. Hence methods have to be developed to reduce the requirements of external

Related papers

Superconductor analog-to-digital converters

Oleg A. Mukhanov, Deepnarayan Gupta, Alan M. Kadin +1 more

Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.

Proceedings of the IEEESep 20, 2004185 citations

High-Resolution Analog-to-Digital Converters toward Software-Defined-Radio Receivers

Akira Fujimaki

We describe three types of software-defined-radio (SDR) receivers based on superconducting technologies. The superconducting analog bandpass filters are essential for all types of the receivers. Another key component is an analog-to-digital converters (ADCs), which are required to have high resolution with a broad band width. The complementary A ADC based on the single-flux-quantum circuit is a promising candidate for the SDR receivers because it has a practical nature together with above-mentioned requirements. The experimentally obtained signal-to-noise ratio (SNR) and sensitivity, which are closely related to the resolution, are 34 dB and 20 μA for a quarter of the full-scale input with a band width of about 20 MHz. If we use the optimum decimation filter, the ADC is expected to have the SNR of 82 dB and the sensitivity of 300 nA. These values meet the requirements of the easiest type of the SDR receiver. After new fabrication process has been introduced and the architecture of the ADC has been improved, all types of recievers could be realized based on suoerconductors.

IEICE Transactions on ElectronicsFeb 1, 20064 citations

RSFQ front-end for a software radio receiver

E. Wikborg, Vasili K. Semenov, Konstantin K. Likharev

We present results of a preliminary analysis of possible front-ends of a software defined radio base station receiver containing superconductor Rapid Single-Flux-Quantum (RSFQ) components. The main component of such a front-end, an oversampling analog-to-digital converter (ADC) with expected internal clock rate up to 20 GHz has already been developed and fabricated with commercially available 3.5-/spl mu/m, 1-kA/cm/sup 2/ niobium-trilayer technology. Simulations show that, even with such crude feature size, the superconductor ADC components can outperform their semiconductor counterparts.

IEEE Transactions on Applied SuperconductivityJun 1, 199949 citations

High Performance HF-VHF All Digital RF Receiver Tested at 20 GHz Clock Frequencies

Anna De Escobar, Richard Hitt, Oleg A. Mukhanov +1 more

Wireless applications would be less expensive, more flexible, and more robust if they had more digital and less analog circuitry. The problem is implementing digital signal processing at radio frequencies. Conventional data converters (ADCs and DACs) and digital circuits are simply not fast enough. However, superconductors can provide ultra fast mixed signal and digital circuits with the linearity and dynamic range required for true direct, digital-RF processing. These superconducting circuits are digital ICs based on Josephson junctions and "rapid-single-flux-quantum" logic (RSFQ), where switching speeds up to 750 GHz have been demonstrated enabling true digital-RF architecture at clock speeds eventually up to 160 GHz. This permits direct conversion between analog RF and digital baseband signals, replacing frequency and protocol-specific analog hardware with flexible digital processors. Data conversion in high frequency wireless applications at frequencies up to 50 GHz will soon become practical. Hypres recently delivered a HF-VHF all digital RF receiver (ADR) prototype to ONR. Testing of this ADR has demonstrated the superior performance of superconducting ICs in cryocooled systems. A US Navy laboratory is now evaluating the world's first complete prototype digital RF receiver capable of direct digitization from DC to 2 GHz

IEEE Military Communications Conference (MILCOM)Oct 1, 20067 citations

High Performance, All Digital RF Receiver Tested at 7.5 GigaHertz

Jack Wong, Rick Dunnegan, Deepnarayan Gupta +6 more

Wireless applications would be less expensive, more flexible, and more robust if they had more digital and less analog circuitry. The problem is implementing digital signal processing at radio frequencies. Conventional data converters (ADCs and DACs) and digital circuits are simply not fast enough, especially at SATCOM frequencies. However, superconductors can provide ultra fast mixed signal and digital circuits with the linearity and dynamic range required for true direct, digital-RF processing. These superconducting circuits are digital ICs based on Josephson junctions and "rapid-single-flux-quantum" logic (RSFQ), where simple circuit switching speeds up to 750 GHz have been demonstrated. This permits direct conversion between analog RF and digital baseband signals, replacing frequency and protocol-specific analog hardware with flexible digital processors. HYPRES recently developed and delivered an X-band All Digital RF Receiver (XADR) prototype system for the US Army CERDEC and PM DCATS. The concept of this ADR is to replace the entire analog RF receive chain between the antenna and the baseband demodulator with a high performance digital RF equivalent. The first XADR prototype system has been successfully demonstrated at the Joint SATCOM engineering Center (JSEC). End to end link testing, over the satellite has been successfully completed using an existing AN/GSC-39 X-band earth terminal, an XTAR satellite, the X-band ADR and a SATCOM modem.

IEEE Military Communications Conference (MILCOM)Oct 1, 200715 citations

Experimental Verification of Superconductor Digital Circuits

Henrik Engseth

AbstractSuperconducting digital technology based on Rapid Single Flux Quantum (RSFQ) logic offers a 50 times faster clock rate and 100 times less on chip power consumption than today's mainstream semiconductor electronics. This technology is attractive for many applications and in particular for Digital Signal Processing (DSP). The applications of the RSFQ DSPs are numerous and include multi-user detection in spread spectrum system, channel equalization for Multi-in, Multi-out (MIMO) systems, and blind detection and signal tracking for signal intelligence.At Chalmers we are developing a hybrid DSP with target performance of 30 giga operations per second. It consists of an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory, and an external semiconductor memory. The development of the complex high speed cryogenic digital system requires interface, packaging and testing solutions. The main difficulties are due to the 4 K operational temperature, the high magnetic field sensitivity of the RSFQ circuits, the multi-channel high bandwidth interface required in the hybrid architecture, and the high speed RSFQ digital core. The key steps towards addressing each of these problems are the subject of this thesis. The main emphasis is put on the experimental testing and interfacing of superconductor electronics. A large part of the work is connected to the experimental verification of DSP components and their incremental improvement towards functionality. The RSFQ circuits tested were fabricated using the four-metal layer VLSI processes available from NGST(8 kA/cm^2 Josephson junction critical current) and HYPRES (both 1 kA/cm^2 and HYPRES 4.5 kA/cm^2. The main results of the work are demonstrations of the RSFQ cache memory with more than 2,000 Josephson junctions, 33.5 GHz operation of the digital clock controller, and 20.48 GHz operation of the autocorrelator. In addition, various experiments have been done for investigation of parasitic effects in RSFQ circuits such as flux trapping and influence of the high current bias lines.At the final stage of the work, a unique high bandwidth 4 K cryocooler based experimental setup has been developed. The system, developed in close cooperation with Hypres Inc. USA, has 40 high speed I/Os with bandwidth of 2 Gbps, 64 DC bias channels, 4 high frequency clock lines, and 4 auxiliary control lines. It supports exchangeable test units for 10 mm x 10 mm and 20 mm x 20 mm Multi Chip Module (MCM) carriers. The availability of such a system is critical to demonstration of the hybrid DSP prototype and future commercialization.

Jan 1, 20050 citations