Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.08025

From maximum work to maximum power in an optimally controlled quantum Ising Otto engine

Vincenzo Roberto Arezzo, Davide Rossini, Giuseppe E. Santoro, G. Piccitto

Published Nov 5, 2026• 0 citations
arXivHTMLPDF

Abstract

In finite-time quantum Otto engines, maximizing power requires balancing the duration of the unitary strokes against the losses from nonadiabatic excitations. We address this trade-off in an Otto engine with a free-fermion working medium, using quantum optimal control. Having determined the single-particle energy scales that maximize ideal work at fixed reservoir temperatures, we realize them as the two endpoint Hamiltonians of a transverse-field Ising chain, connected by a path that crosses the quantum critical point. Optimal control of the unitary strokes yields near-ideal work on a time scale growing linearly with system size, instead of quadratically as for linear driving. We derive a time-rescaling relation that maps protocols with different energy scales onto a single reference problem and, for complete thermalization strokes of fixed duration, use it to build an analytical model of the cycle power. The model predicts two competing maximum-power regimes: a slow branch that approaches the ideal work, and a fast, size-independent branch that trades work for a shorter cycle and dominates above a crossover size, in quantitative agreement with numerical optimal-control results. It also identifies power-optimal energy scales that differ from the work-optimal ones and further increase the power. Our results provide a predictive approach to jointly optimizing the operating conditions and finite-time dynamics of quantum heat engines.

DOI
10.48550/arxiv.2611.08025

Related papers

Finite-time performance of a cyclic two-dimensional quantum Ising heat engine

S. P. Katoorani, Christian Kohlfürst, Friedemann Queißer +2 more

We discuss the limit cycle regime of a finite-time quantum Otto cycle with a frictionless two-dimensional anisotropic Ising model as the working fluid. From Onsager's exact equilibrium solution, we first find optimal parameters for the operational modes of work extraction and cooling for infinitely slow cycles. The equilibrium points in these optimal cycles correspond to different phases of the model, such that the nonequilibrium dynamics during the cycle bypasses the phase transition. Finite-time cycles allow for finite power extraction or cooling currents, but for such cycles, we point out that-already within the regime of weak system-reservoir coupling-energetic changes of the system during dissipative strokes may contain a significant portion of coupling and decoupling control work and should thus not be directly identified with heat. For ultrafast cycles, the required control work spoils performance, such that to maximize work extraction or cooling heat per cycle time, there is an optimal cycle duration. We also find that net-zero-energy transitions may lead to undesired reservoir heating.

arXiv:2503.14089•Physical review. E•Jul 1, 2025•2 citations

Critical Crossings and Quantum Friction in a Finite-Time $XY$-Chain Otto Engine

Geronimo Allan Jerome Acosta, Cristine Dlr. Villagonzalo

Abstract We investigate the finite-time performance of a quantum Otto engine with a transverse-field anisotropic $XY$ spin chain as its working medium. By decomposing the chain into independent momentum sectors, we calculate mode-resolved transition probabilities during linear transverse-field ramps. We determine the resulting excitation density, work, heat, efficiency, and power for driving protocols in which the transverse field is varied linearly between prescribed endpoints during the two unitary strokes, while the anisotropy remains fixed. Protocols crossing one or both quantum critical points exhibit Kibble--Zurek scaling, $n_{\mathrm{ex}}\sim\tau^{-1/2}$, whereas protocols that maintain a nonzero energy gap throughout the ramps exhibit the faster decay $n_{\mathrm{ex}}\sim\tau^{-2}$, where $\tau$ is the duration of each ramp. The work separates into an endpoint-dependent adiabatic contribution and a nonnegative contribution associated with quantum friction. At short driving times, quantum friction can exceed the adiabatic work output and prevent heat-engine operation. At long driving times, the thermodynamic quantities approach adiabatic values determined by the endpoint spectra and thermal population imbalances. Increasing anisotropy suppresses excitations and hastens the approach to the adiabatic limit. These results distinguish endpoint thermodynamics from critical-crossing dynamics and clarify their roles in finite-time engine performance.

•Nov 11, 2026•0 citations

Universal finite-time thermodynamics of many-body quantum machines from Kibble-Zurek scaling

B S Revathy, Victor Mukherjee, Uma Divakaran +1 more

We demonstrate the existence of universal features in the finite-time thermodynamics of quantum machines by considering a many-body quantum Otto cycle in which the working medium is driven across quantum critical points during the unitary strokes.Specifically, we consider a quantum engine powered by dissipative energizing and relaxing baths.We show that under very generic conditions, the output work is governed by the Kibble-Zurek mechanism; i.e., it exhibits a universal power-law scaling with the driving speed through the critical points.We also optimize the finite-time thermodynamics as a function of the driving speed.The maximum power and the corresponding efficiency take a universal form, and are reached for an optimal speed that is governed by the critical exponents.We exemplify our results by considering a transverse-field Ising spin chain as the working medium.For this model, we also show how the efficiency and power vary as the engine becomes critical.

arXiv:2003.06607•Physical Review Research•Nov 18, 2020•55 citations

Improving performance of quantum heat engines using modified Otto cycle

B S Revathy, Harsh Sharma, Uma Divakaran

Abstract The efficiency of a quantum heat engine is maximum when the unitary strokes of the quantum Otto cycle are adiabatic. On the other hand, this may not be always possible due to small energy gaps in the system, especially at the critical point (CP) where the gap between the ground state and the first excited state vanishes and the system gets excited. With the aim to regain this lost adiabaticity, we modify one of the unitary strokes of the Otto cycle by allowing the system to first evolve with a time dependent Hamiltonian as in the case of a usual Otto cycle, followed by an additional evolution with a different time independent Hamiltonian so that the system reaches a less excited state. This will help in increasing the magnitude of the heat absorbed from the hot bath so that the work output and efficiency of the engine can be increased. We demonstrate this method using an integrable model and a non-integrable model as the working medium and discuss the generality and limitations of this method. In the case of a two spin system, the optimal value for the time till which the system needs to be freely evolved is calculated analytically in the adiabatic limit. The results show that implementing this modified unitary stroke significantly improves the work output and efficiency of the engine, especially when it crosses the CP.

arXiv:2302.07003•Journal of Physics A Mathematical and Theoretical•Mar 28, 2024•4 citations

Many-body quantum heat engines based on free fermion systems

Vincenzo Roberto Arezzo, Davide Rossini, G. Piccitto

Devising and constructing quantum many-body heat engines is a key challenge of quantum thermodynamics. Most of the research in this field assumes the strokes to be ideal transformations. Here, the authors study the performance of realistic Otto engines with finite-time duration, whose working substance is made of free-fermion systems. They provide analytic expressions for the work and the power delivered through imperfect adiabatic and isochoric strokes. These findings are applied to the case study of an Ising-like quantum Otto cycle.

arXiv:2403.11645•Physical review. B./Physical review. B•Jun 20, 2024•11 citations

A finite-time quantum Otto engine with tunnel coupled one-dimensional Bose gases

Vijit V. Nautiyal, Raymon S. Watson, Karen V. Kheruntsyan

Abstract We undertake a theoretical study of a finite-time quantum Otto engine cycle driven by inter-particle interactions in a weakly interacting one-dimensional (1D) Bose gas in the quasicondensate regime. Utilizing ac-field approach, we simulate the entire Otto cycle, i.e. the two work strokes and the two equilibration strokes. More specifically, the interaction-induced work strokes are modelled by treating the working fluid as an isolated quantum many-body system undergoing unitary evolution. The equilibration strokes, on the other hand, are modelled by treating the working fluid as an open quantum system tunnel-coupled to another quasicondensate which acts as either the hot or cold reservoir, albeit of finite size. We find that, unlike a uniform 1D Bose gas, a harmonically trapped quasicondensate cannot operate purely as aheatengine; instead, the engine operation is enabled by additionalchemicalwork performed on the working fluid, facilitated by the inflow of particles from the hot reservoir. The microscopic treatment of dynamics during equilibration strokes enables us to evaluate the characteristic operational time scales of this Ottothermochemicalengine, crucial for characterizing its power output, without any ad hoc assumptions about typical thermalization timescales. We analyse the performance and quantify the figures of merit of the proposed Otto thermochemical engine, finding that it offers a favourable trade-off between efficiency and power output, particularly when the interaction-induced work strokes are implemented via a sudden quench. We further demonstrate that in the sudden quench regime, the engine operates with an efficiency close to the near-adiabatic (near maximum efficiency) limit, while concurrently achieving maximum power output.

arXiv:2404.16470•New Journal of Physics•Jun 1, 2024•19 citations
In finite-time quantum Otto engines, maximizing power requires balancing the duration of the unitary strokes against the losses from nonadiabatic excitations. We address this trade-off in an Otto engine with a free-fermion working medium, using quantum optimal control. Having determined the single-particle energy scales that maximize ideal work at fixed reservoir temperatures, we realize them as the two endpoint Hamiltonians of a transverse-field Ising chain, connected by a path that crosses the quantum critical point. Optimal control of the unitary strokes yields near-ideal work on a time scale growing linearly with system size, instead of quadratically as for linear driving. We derive a time-rescaling relation that maps protocols with different energy scales onto a single reference problem and, for complete thermalization strokes of fixed duration, use it to build an analytical model of the cycle power. The model predicts two competing maximum-power regimes: a slow branch that approaches the ideal work, and a fast, size-independent branch that trades work for a shorter cycle and dominates above a crossover size, in quantitative agreement with numerical optimal-control results. It also identifies power-optimal energy scales that differ from the work-optimal ones and further increase the power. Our results provide a predictive approach to jointly optimizing the operating conditions and finite-time dynamics of quantum heat engines.
We discuss the limit cycle regime of a finite-time quantum Otto cycle with a frictionless two-dimensional anisotropic Ising model as the working fluid. From Onsager's exact equilibrium solution, we first find optimal parameters for the operational modes of work extraction and cooling for infinitely slow cycles. The equilibrium points in these optimal cycles correspond to different phases of the model, such that the nonequilibrium dynamics during the cycle bypasses the phase transition. Finite-time cycles allow for finite power extraction or cooling currents, but for such cycles, we point out that-already within the regime of weak system-reservoir coupling-energetic changes of the system during dissipative strokes may contain a significant portion of coupling and decoupling control work and should thus not be directly identified with heat. For ultrafast cycles, the required control work spoils performance, such that to maximize work extraction or cooling heat per cycle time, there is an optimal cycle duration. We also find that net-zero-energy transitions may lead to undesired reservoir heating.
Critical Crossings and Quantum Friction in a Finite-Time XYXYXY-Chain Otto Engine
Abstract We investigate the finite-time performance of a quantum Otto engine with a transverse-field anisotropic XYXYXY spin chain as its working medium. By decomposing the chain into independent momentum sectors, we calculate mode-resolved transition probabilities during linear transverse-field ramps. We determine the resulting excitation density, work, heat, efficiency, and power for driving protocols in which the transverse field is varied linearly between prescribed endpoints during the two unitary strokes, while the anisotropy remains fixed. Protocols crossing one or both quantum critical points exhibit Kibble--Zurek scaling, nex∼τ−1/2n_{\mathrm{ex}}\sim\tau^{-1/2}nex​∼τ−1/2, whereas protocols that maintain a nonzero energy gap throughout the ramps exhibit the faster decay nex∼τ−2n_{\mathrm{ex}}\sim\tau^{-2}nex​∼τ−2, where τ\tauτ is the duration of each ramp. The work separates into an endpoint-dependent adiabatic contribution and a nonnegative contribution associated with quantum friction. At short driving times, quantum friction can exceed the adiabatic work output and prevent heat-engine operation. At long driving times, the thermodynamic quantities approach adiabatic values determined by the endpoint spectra and thermal population imbalances. Increasing anisotropy suppresses excitations and hastens the approach to the adiabatic limit. These results distinguish endpoint thermodynamics from critical-crossing dynamics and clarify their roles in finite-time engine performance.
We demonstrate the existence of universal features in the finite-time thermodynamics of quantum machines by considering a many-body quantum Otto cycle in which the working medium is driven across quantum critical points during the unitary strokes.Specifically, we consider a quantum engine powered by dissipative energizing and relaxing baths.We show that under very generic conditions, the output work is governed by the Kibble-Zurek mechanism; i.e., it exhibits a universal power-law scaling with the driving speed through the critical points.We also optimize the finite-time thermodynamics as a function of the driving speed.The maximum power and the corresponding efficiency take a universal form, and are reached for an optimal speed that is governed by the critical exponents.We exemplify our results by considering a transverse-field Ising spin chain as the working medium.For this model, we also show how the efficiency and power vary as the engine becomes critical.
Abstract The efficiency of a quantum heat engine is maximum when the unitary strokes of the quantum Otto cycle are adiabatic. On the other hand, this may not be always possible due to small energy gaps in the system, especially at the critical point (CP) where the gap between the ground state and the first excited state vanishes and the system gets excited. With the aim to regain this lost adiabaticity, we modify one of the unitary strokes of the Otto cycle by allowing the system to first evolve with a time dependent Hamiltonian as in the case of a usual Otto cycle, followed by an additional evolution with a different time independent Hamiltonian so that the system reaches a less excited state. This will help in increasing the magnitude of the heat absorbed from the hot bath so that the work output and efficiency of the engine can be increased. We demonstrate this method using an integrable model and a non-integrable model as the working medium and discuss the generality and limitations of this method. In the case of a two spin system, the optimal value for the time till which the system needs to be freely evolved is calculated analytically in the adiabatic limit. The results show that implementing this modified unitary stroke significantly improves the work output and efficiency of the engine, especially when it crosses the CP.
Devising and constructing quantum many-body heat engines is a key challenge of quantum thermodynamics. Most of the research in this field assumes the strokes to be ideal transformations. Here, the authors study the performance of realistic Otto engines with finite-time duration, whose working substance is made of free-fermion systems. They provide analytic expressions for the work and the power delivered through imperfect adiabatic and isochoric strokes. These findings are applied to the case study of an Ising-like quantum Otto cycle.
Abstract We undertake a theoretical study of a finite-time quantum Otto engine cycle driven by inter-particle interactions in a weakly interacting one-dimensional (1D) Bose gas in the quasicondensate regime. Utilizing ac-field approach, we simulate the entire Otto cycle, i.e. the two work strokes and the two equilibration strokes. More specifically, the interaction-induced work strokes are modelled by treating the working fluid as an isolated quantum many-body system undergoing unitary evolution. The equilibration strokes, on the other hand, are modelled by treating the working fluid as an open quantum system tunnel-coupled to another quasicondensate which acts as either the hot or cold reservoir, albeit of finite size. We find that, unlike a uniform 1D Bose gas, a harmonically trapped quasicondensate cannot operate purely as aheatengine; instead, the engine operation is enabled by additionalchemicalwork performed on the working fluid, facilitated by the inflow of particles from the hot reservoir. The microscopic treatment of dynamics during equilibration strokes enables us to evaluate the characteristic operational time scales of this Ottothermochemicalengine, crucial for characterizing its power output, without any ad hoc assumptions about typical thermalization timescales. We analyse the performance and quantify the figures of merit of the proposed Otto thermochemical engine, finding that it offers a favourable trade-off between efficiency and power output, particularly when the interaction-induced work strokes are implemented via a sudden quench. We further demonstrate that in the sudden quench regime, the engine operates with an efficiency close to the near-adiabatic (near maximum efficiency) limit, while concurrently achieving maximum power output.