Abstract We undertake a theoretical study of a finite-time quantum Otto engine cycle driven by inter-particle interactions in a weakly interacting one-dimensional (1D) Bose gas in the quasicondensate regime. Utilizing ac-field approach, we simulate the entire Otto cycle, i.e. the two work strokes and the two equilibration strokes. More specifically, the interaction-induced work strokes are modelled by treating the working fluid as an isolated quantum many-body system undergoing unitary evolution. The equilibration strokes, on the other hand, are modelled by treating the working fluid as an open quantum system tunnel-coupled to another quasicondensate which acts as either the hot or cold reservoir, albeit of finite size. We find that, unlike a uniform 1D Bose gas, a harmonically trapped quasicondensate cannot operate purely as aheatengine; instead, the engine operation is enabled by additionalchemicalwork performed on the working fluid, facilitated by the inflow of particles from the hot reservoir. The microscopic treatment of dynamics during equilibration strokes enables us to evaluate the characteristic operational time scales of this Ottothermochemicalengine, crucial for characterizing its power output, without any ad hoc assumptions about typical thermalization timescales. We analyse the performance and quantify the figures of merit of the proposed Otto thermochemical engine, finding that it offers a favourable trade-off between efficiency and power output, particularly when the interaction-induced work strokes are implemented via a sudden quench. We further demonstrate that in the sudden quench regime, the engine operates with an efficiency close to the near-adiabatic (near maximum efficiency) limit, while concurrently achieving maximum power output.
Abstract We undertake a theoretical study of a finite-time quantum Otto engine cycle driven by inter-particle interactions in a weakly interacting one-dimensional (1D) Bose gas in the quasicondensate regime. Utilizing ac-field approach, we simulate the entire Otto cycle, i.e. the two work strokes and the two equilibration strokes. More specifically, the interaction-induced work strokes are modelled by treating the working fluid as an isolated quantum many-body system undergoing unitary evolution. The equilibration strokes, on the other hand, are modelled by treating the working fluid as an open quantum system tunnel-coupled to another quasicondensate which acts as either the hot or cold reservoir, albeit of finite size. We find that, unlike a uniform 1D Bose gas, a harmonically trapped quasicondensate cannot operate purely as aheatengine; instead, the engine operation is enabled by additionalchemicalwork performed on the working fluid, facilitated by the inflow of particles from the hot reservoir. The microscopic treatment of dynamics during equilibration strokes enables us to evaluate the characteristic operational time scales of this Ottothermochemicalengine, crucial for characterizing its power output, without any ad hoc assumptions about typical thermalization timescales. We analyse the performance and quantify the figures of merit of the proposed Otto thermochemical engine, finding that it offers a favourable trade-off between efficiency and power output, particularly when the interaction-induced work strokes are implemented via a sudden quench. We further demonstrate that in the sudden quench regime, the engine operates with an efficiency close to the near-adiabatic (near maximum efficiency) limit, while concurrently achieving maximum power output.
We theoretically investigate the finite-time performance of a quantum thermochemical engine utilizing a harmonically trapped one-dimensional (1D) Bose gas in the quasicondensate regime as the working fluid. The proposed engine operates in an Otto cycle, where the unitary work strokes are simulated through a quench of the interatomic interactions of the 1D Bose gas. In the work strokes, the working fluid is treated as a closed quantum many-body system that undergoes dynamic evolution, beginning from an initial thermal equilibrium state at a nonzero temperature. On the other hand, during the thermalization strokes, the working fluid is treated as an open many-body quantum system in diffusive contact with a thermal reservoir, allowing particle exchange alongside the transfer of heat. Using a c-field approach, we demonstrate that the engine's operation is enabled by the chemical work done on the working fluid through the flow of particles from the hot reservoir. We examine the finite-time performance of the proposed quantum thermochemical engine in two extreme regimes: (i) the out-of-equilibrium regime (sudden quench), which yields near-maximum power (due to fast driving of the system) while compromising efficiency, and (ii) the quasistatic (near-adiabatic) limit, which approaches maximum efficiency but generates zero power output due to slow driving of the system. Notably, we show that using chemical work allows the engine to achieve efficiencies close to the near-maximum (quasistatic) limit, even in the out-of-equilibrium regime, while maintaining high power output. Thus, in the out-of-equilibrium operational regime, our proposed engine provides a favorable trade-off between efficiency and power output. We also draw connections to previous research, particularly the case of an adiabatic engine cycle operating at zero temperature. We show that this zero-temperature scenario establishes an upper bound on the efficiency and work of our proposed thermochemical engine operating at nonzero temperatures.
The development of the theory of thermodynamics dates back nearly two centuries, to when the need arose to comprehend and enhance the performance of a novel technology of that era, the heat engine. Extending the classical concepts related to the properties of heat and work into the quantum realm forms the foundation of an emerging field of research known as quantum thermodynamics. To unify the disparate theories of classical thermodynamics and quantum mechanics, a thoroughly developed theoretical framework is necessary. Quantum heat engines provide a fundamental platform for this purpose. Many-body quantum heat engines, in particular, can provide important insights into the potential utilisation of exotic quantum phenomena, such as entanglement and quantum coherence, for building quantum devices that can surpass their classical counterparts in performance. One-dimensional (1D) Bose gases are a paradigmatic example of an interacting quantum many-body system that can be used as a versatile platform for building heat engines to test the thermodynamic theories in the quantum regime. The versatility of this platform comes through the routine experimental realisability of 1D Bose gases, with precise control of their internal and external properties, such as the strength of inter-atomic interactions and external confinement, and the presence of quantum many-body effects. In recent years, there has been an increased focus on exploiting the unique properties of ultracold atomic gases to realize many-body quantum heat engines. Despite this heightened attention and the resulting significant advances at the level of theoretical proposals, experimental feasibility and practical utilization of such engines remains at its infancy. Achieving significant advances at the experimental level requires a deeper understanding of the fundamental components of quantum-gas heat engines. Motivated by this goal, in this thesis we propose a novel and experimentally realistic quantum many-body heat engine that operates in an Otto cycle and uses a weakly interacting harmonically trapped 1D Bose gas as a working fluid. To execute work during the work strokes, we use a quench of the strength of interparticle interactions; when the quench is sudden with respect to the longitudinal dynamics, it maximises the power output. The interaction-induced work strokes are implemented by treating the working fluid as an isolated quantum many-body system undergoing a dynamical evolution starting from a finite temperature thermal equilibrium state. Furthermore, to optimize the performance of this interaction-driven quantum Otto cycle in an experimental scenario, we undertake a comprehensive numerical investigation of the dynamics of the system-reservoir coupling during the heat transfer strokes. We model the heat transfer strokes by treating the working substance as an open quantum many-body system that is coupled to a reservoir.After providing an overview of recent advances in the field of quantum thermodynamics and the background theory of 1D Bose gases in Chapters 1 and 2 we present the main results of this thesis in Chapters 3, 4 and 5. In Chapter 3, we study the individual interaction-induced work strokes of the Otto cycle with a weakly interacting 1D Bose gas as the working fluid. We evaluate the instantaneity of the sudden quench, specifically, identifying the minimum timescales required to perform the sudden quench of the interaction strength without invoking the transverse dynamics. Knowledge of these timescales enables us to perform the sudden quench in an experimental setting while ensuring that the system retains its 1D characteristics and the theory of 1D Bose gas is applicable. Additionally, we determine the time scales governing the opposite scenario of near-adiabatic quench which corresponds to minimum irreversible work in the engine cycle and hence maximum efficiency. This will help us benchmark the sudden quench engine's performance compared to a nearly ideal (near-adiabatic) scenario corresponding to maximum efficiency.Next, in Chapter 4, we analyze the heat transfer strokes of the Otto cycle, where the system is coupled to a reservoir. Using the c-field approach, we simulate the coupling dynamics of the system with both finite and infinite-size reservoirs. During the heat transfer stroke of the quantum Otto cycle, we treat the working fluid as an open quantum many-body system that is in thermal and diffusive contact with another quantum many-body system serving as the reservoir. In our real-time dynamical simulations of the engine strokes, we use a c-field approach based on the stochastic projected Gross-Pitaevskii equation. This approach enables us to treat both the working fluid and the hot and cold reservoirs as independent quantum many-body systems with chemical potential and temperature imbalances. To model the heat transfer strokes of such an engine with a finite-size reservoir, we use a tunnel-coupled model of two quasicondensates that treats both the system and the reservoir microscopically. Our analysis incorporates the impact of both finite-time operation and finite-size reservoirs in the engine cycle to gain a deeper understanding of the operational feasibility of such engines. Our results indicate that, in contrast to the common assumption of near-instantaneous heat transfer between the system and the reservoir, the thermalisation time of the system during these heat transfer strokes is non-negligible when compared to the duration of work strokes even in the near-adiabatic quench. This observation holds true even in the case of coupling the system with an infinite reservoir during the heat transfer strokes. Moreover, we demonstrate that for a finite-size reservoir, the initial dynamics (namely fast initial energy transfer) in the tunnel-coupled model of two quasicondensates can be leveraged to reduce the total driving time and hence increase the power output of the engine. Finally, in Chapter 5, we explore an alternate protocol that involves performing chemical work on the system during the heat transfer strokes to boost the efficiency and power output of the quantum Otto engines with a 1D Bose gas as a working fluid. We compare the performance of the sudden quench engine with an engine driven by a near-adiabatic and a finite-time quench of the interaction strength with respect to the longitudinal dynamics. We then conclude the thesis by summarising our main findings and presenting open questions for future work in the final chapter, Chapter 6.
In this thesis, we explore various aspects of equilibrium and nonequilibrium thermodynamics for ultracold atomic gases, with a focus on the experimentally realisable one-dimensional (1D) Bose gas. This is a paradigmatic example of an interacting many-body system, which is integrable in the uniform limit and near-integrable otherwise. We first investigate a quantum thermodynamic Otto cycle driven by a quench of interaction strength of a 1D Bose gas. For the case of a sudden quench in a uniform 1D Bose gas, we demonstrate how the performance of this highly nonequilibrium quantum thermal machine may be expressed in terms of atom-atom correlations. Further, we derive a new Maxwell relation which allows one to express entropy, which is generally difficult to ascertain in quantum systems, in terms of Glauber's local second-order correlation function, which are experimentally measurable. We next perform benchmarks of GHD in order to ascertain the regimes where such a theory may be applied, and then utilize it to investigate the interaction strength-driven quantum Otto cycle in a harmonically trapped 1D Bose gas. However, to realise such an engine in an experimentally realistic manner would require modelling thermalisation with external reservoirs, which is currently beyond the scope of GHD. Yet, the classical c-field stochastic-projected Gross-Pitaevskii equation (SPGPE) method is capable of simulating tunnel-coupling pairs of 1D Bose gases in the weakly interacting regime. We therefore utilise this numerical method to simulate the \emph{full} quantum Otto engine cycle, realised through a single working fluid tunnel-coupled to two 1D Bose gases, which constitute the external (hot and cold) reservoirs.
We apply a simple sudden-quench approximation for the unitary work strokes of a quantum Otto engine in order to provide a general analysis of its performance, applicable to arbitrary quantum models with two-body interactions. This work extends recent results for an interaction-driven Otto cycle to generic many-body interacting quantum models, providing universal bounds on their operation efficiency. From this, we demonstrate that the net work of such an engine cycle is determined entirely by interparticle correlations. Applications are demonstrated for a handful of paradigmatic many-body quantum models, including an engine-with a spin-1/2 Fermi gas with contact two-body interactions as its working medium-in which we leverage control over spin polarization to greatly enhance its performance compared to the unpolarized case. We then extend the analysis of interaction-driven quantum Otto engine cycles to systems where control is exerted over the strength of arbitrary quantum operators that might be present in the system Hamiltonian (such as one-body, or three-body, etc.), finding that the general principles derived for the sudden quench with two-body interactions apply universally. As an example, this is demonstrated for a conventional volumetric Otto cycle, where beneficial net work is generated by leveraging the control over the frequency of an external trap, which is a one-body operator. However, we emphasize that the results derived here apply universally to all Otto engine cycles operating under a sudden-quench protocol.
The quantum Otto cycle serves as a bridge between the macroscopic world of heat engines and the quantum regime of thermal devices composed from a single element. We compile recent studies of the quantum Otto cycle with a harmonic oscillator as a working medium. This model has the advantage that it is analytically trackable. In addition, an experimental realization has been achieved, employing a single ion in a harmonic trap. The review is embedded in the field of quantum thermodynamics and quantum open systems. The basic principles of the theory are explained by a specific example illuminating the basic definitions of work and heat. The relation between quantum observables and the state of the system is emphasized. The dynamical description of the cycle is based on a completely positive map formulated as a propagator for each stroke of the engine. Explicit solutions for these propagators are described on a vector space of quantum thermodynamical observables. These solutions which employ different assumptions and techniques are compared. The tradeoff between power and efficiency is the focal point of finite-time-thermodynamics. The dynamical model enables the study of finite time cycles limiting time on the adiabatic and the thermalization times. Explicit finite time solutions are found which are frictionless (meaning that no coherence is generated), and are also known as shortcuts to adiabaticity.The transition from frictionless to sudden adiabats is characterized by a non-hermitian degeneracy in the propagator. In addition, the influence of noise on the control is illustrated. These results are used to close the cycles either as engines or as refrigerators. The properties of the limit cycle are described. Methods to optimize the power by controlling the thermalization time are also introduced. At high temperatures, the Novikov–Curzon–Ahlborn efficiency at maximum power is obtained. The sudden limit of the engine which allows finite power at zero cycle time is shown. The refrigerator cycle is described within the frictionless limit, with emphasis on the cooling rate when the cold bath temperature approaches zero.
Abstract The efficiency of a quantum heat engine is maximum when the unitary strokes of the quantum Otto cycle are adiabatic. On the other hand, this may not be always possible due to small energy gaps in the system, especially at the critical point (CP) where the gap between the ground state and the first excited state vanishes and the system gets excited. With the aim to regain this lost adiabaticity, we modify one of the unitary strokes of the Otto cycle by allowing the system to first evolve with a time dependent Hamiltonian as in the case of a usual Otto cycle, followed by an additional evolution with a different time independent Hamiltonian so that the system reaches a less excited state. This will help in increasing the magnitude of the heat absorbed from the hot bath so that the work output and efficiency of the engine can be increased. We demonstrate this method using an integrable model and a non-integrable model as the working medium and discuss the generality and limitations of this method. In the case of a two spin system, the optimal value for the time till which the system needs to be freely evolved is calculated analytically in the adiabatic limit. The results show that implementing this modified unitary stroke significantly improves the work output and efficiency of the engine, especially when it crosses the CP.