Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.06181

Continuous Wideband Multicarrier Rydberg Atomic Quantum Receiver

Qihao Peng, Qu Luo, Maged Elkashlan, Cunhua Pan, Pei Xiao, George K. Karagiannidis, Trung Q. Duong, Jiangzhou Wang

Published Nov 4, 2026• 0 citations
arXivHTMLPDF

Abstract

This paper investigates continuous wideband orthogonal frequency-division multiplexing (OFDM) reception using an auxiliary (AUX)-assisted five-level Rydberg atomic quantum receiver (RAQR) with a single microwave local oscillator (LO), without requiring additional atomic reception transitions or LO frequency combs. By exploiting Floquet theory, the proposed framework characterizes the dynamic atomic response at finite signal-LO detunings without relying on a quasi-static Taylor expansion around the LO operating point. Specifically, closed-form radio-frequency (RF)-to-electrical conversion expressions are derived from the Lindblad master equation under weak-probe and weak-signal approximations. Building on these expressions, an equivalent multicarrier communication model is established, revealing the inherent frequency selectivity of the atomic response and the resulting subcarrier-dependent amplitude and phase distortions. RAQR-aware zero-forcing (ZF) equalization is developed to enable reliable OFDM reception. Furthermore, analytical results reveal how LO and AUX driving influence the atomic response through dressed-state splitting and energy-level shifts. An upper bound on the LO-referenced half-power span is derived, and an approximately $18$-dB reduction in center-response power per bandwidth doubling is established in the AUX-free strong-LO regime. Simulation results validate the analytical response model and reveal pronounced subcarrier-dependent amplitude and phase variations across over $10$~MHz, highlighting the potential of RAQRs as wideband receiving front ends for future wireless communications.

DOI
10.48550/arxiv.2611.06181

Related papers

Rydberg Atomic Quantum Receivers for OFDM Systems: An Atomic-Comb Design

Yuanbin Chen, Chong Meng Samson See, Chau Yuen

Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.

cs.ITCross-listedarXiv:2610.15306•Oct 13, 2026•0 citations

An Optical Pathway to Movable Rydberg Atomic Quantum Receivers

Qihao Peng, Qu Luo, Lixia Xiao +6 more

This paper develops an optically movable Rydberg atomic quantum receiver (RAQR), in which the probe and coupling beams are steered within each vapor cell to dynamically reconfigure the effective radio-frequency (RF) sensing position without mechanical actuation. A closed-form equivalent baseband model is derived by separating the atomic transduction coefficient, optical steering phase, and cell-center array response into distinct factors and the accuracy of the resulting model is validated against numerical solutions of the Lindblad master equation. Based on the derived model, we reveal two complementary channel-shaping mechanisms, including intrinsic beam-pattern shaping through RF-to-optical transduction and per-cell phase control enabled by optical displacement. To further exploit these capabilities, a non-convex sum-rate maximization problem is formulated over the optical positions and local oscillator design and solved via an alternating optimization framework with analytical gradients. Simulation results validate the derived model and demonstrate substantial performance gains enabled by optical movability, highlighting its potential as a programmable receiver architecture for future wireless networks.

arXiv:2608.30718•Aug 31, 2026•0 citations

Harnessing Rydberg Atomic Receivers: From Quantum Physics to Wireless Communications

Yuanbin Chen, Xufeng Guo, Chau Yuen +5 more

The intrinsic integration of Rydberg atomic receivers into wireless communication systems is proposed, by harnessing the principles of quantum physics in wireless communications. More particularly, we conceive a pair of Rydberg atomic receivers, one incorporates a local oscillator (LO), referred to as an LO-dressed receiver, while the other operates without an LO and is termed an LO-free receiver. The appropriate wireless model is developed for each configuration, elaborating on the receiver's responses to the radio frequency (RF) signal, on the potential noise sources, and on the signal-to-noise ratio (SNR) performance. The developed wireless model conforms to the classical RF framework, facilitating compatibility with established signal processing methodologies. Next, we investigate the associated distortion effects that might occur, specifically identifying the conditions under which distortion arises and demonstrating the boundaries of linear dynamic ranges. This provides critical insights into its practical implementations in wireless systems. Finally, extensive simulation results are provided for characterizing the performance of wireless systems, harnessing this pair of Rydberg atomic receivers. Our results demonstrate that LO-dressed systems achieve a significant SNR gain of approximately 40~50 dB over conventional RF receivers in the standard quantum limit regime. This SNR head-room translates into reduced symbol error rates, enabling efficient and reliable transmission with higher-order constellations.

arXiv:2501.11842•IEEE Transactions on Wireless Communications•Jan 1, 2026•39 citations

Rydberg Atomic Quantum Receivers for Classical Wireless Communications and Sensing: Their Models and Performance

Tierui Gong, Jiaming Sun, Chau Yuen +6 more

The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.

arXiv:2412.05554•IEEE Transactions on Communications•Jan 1, 2026•26 citations

Bandwidth Enhanced Rydberg Atomic Quantum Receivers for Wireless Communication and Sensing

Huizhi Wang, Tierui Gong, Emil Björnson +1 more

Rydberg atomic quantum receivers (RAQRs) have emerged as highly sensitive receivers for future communication and sensing systems. However, conventional RAQRs are primarily effective for single-carrier and narrowband reception, typically with an operational bandwidth of only a few hundred kilohertz. To enable the reception of multi-carrier signals with larger bandwidth, we propose a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) architecture based on a five-level quantum system model. We analyze the amplitude and phase of the output laser in MC-RAQR and extract the baseband electrical signal for signal processing. Furthermore, we quantify the performance of MC-RAQR in multi-carrier communication and sensing by studying the channel capacity and distance estimation, respectively. Numerical results show that the MC-RAQR is capable of achieving a bandwidth of $7.2$ MHz, which is an order of magnitude larger than conventional RAQRs. Besides, compared to conventional receivers, MC-RAQR can improve the capacity and distance estimation by $18$-fold and $10^3$-fold, respectively. This validates the superiority of MC-RAQR in receiving multi-carrier signal, and demonstrates its compatibility in detecting waveforms such as orthogonal frequency‐division multiplexing.

International Conference on Communications•May 24, 2026•0 citations

Hybrid Six-Level Rydberg Atomic Quantum Receiver for Multi-Band Wireless Communications

Lahiru Shyamal, Harini Hapuarachchi, Saman Atapattu +1 more

Rydberg atomic quantum receivers (RAQRs) have recently emerged as a promising technology for radio-frequency (RF) reception by directly transducing incident RF fields into optical signals. Existing receiver architectures, however, exploit only subsets of the dipole-allowed transitions within a given atomic manifold, limiting the number of simultaneously accessible RF channels. In this paper, a hybrid six-level Rydberg atomic quantum receiver (H-RAQR) is proposed by integrating parallel and cascaded RF coupling pathways within a single vapor-cell receiver. A communication-oriented analytical framework is developed by deriving a closed-form steady-state atom--field interaction model and establishing an equivalent baseband signal representation. The achievable ergodic sum rate is analyzed, and a resource-efficiency metric is introduced to quantify throughput per unit optical receiver resource. The analytical model is validated against full Lindblad master-equation simulations over its identified operating region. Numerical results show that the proposed H-RAQR supports four simultaneous RF channels within a single atomic system, achieves higher ergodic sum rate than conventional parallel Rydberg state (PRS) and cascade Rydberg state (CRS) receivers, and provides about 29% higher resource efficiency than a combined PRS-CRS deployment with equivalent four-band coverage. The proposed framework provides a scalable foundation for multi-band atomic wireless receivers.

quant-pharXiv:2604.12106•Apr 15, 2026•1 citation
This paper investigates continuous wideband orthogonal frequency-division multiplexing (OFDM) reception using an auxiliary (AUX)-assisted five-level Rydberg atomic quantum receiver (RAQR) with a single microwave local oscillator (LO), without requiring additional atomic reception transitions or LO frequency combs. By exploiting Floquet theory, the proposed framework characterizes the dynamic atomic response at finite signal-LO detunings without relying on a quasi-static Taylor expansion around the LO operating point. Specifically, closed-form radio-frequency (RF)-to-electrical conversion expressions are derived from the Lindblad master equation under weak-probe and weak-signal approximations. Building on these expressions, an equivalent multicarrier communication model is established, revealing the inherent frequency selectivity of the atomic response and the resulting subcarrier-dependent amplitude and phase distortions. RAQR-aware zero-forcing (ZF) equalization is developed to enable reliable OFDM reception. Furthermore, analytical results reveal how LO and AUX driving influence the atomic response through dressed-state splitting and energy-level shifts. An upper bound on the LO-referenced half-power span is derived, and an approximately 181818-dB reduction in center-response power per bandwidth doubling is established in the AUX-free strong-LO regime. Simulation results validate the analytical response model and reveal pronounced subcarrier-dependent amplitude and phase variations across over 101010~MHz, highlighting the potential of RAQRs as wideband receiving front ends for future wireless communications.
Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.
This paper develops an optically movable Rydberg atomic quantum receiver (RAQR), in which the probe and coupling beams are steered within each vapor cell to dynamically reconfigure the effective radio-frequency (RF) sensing position without mechanical actuation. A closed-form equivalent baseband model is derived by separating the atomic transduction coefficient, optical steering phase, and cell-center array response into distinct factors and the accuracy of the resulting model is validated against numerical solutions of the Lindblad master equation. Based on the derived model, we reveal two complementary channel-shaping mechanisms, including intrinsic beam-pattern shaping through RF-to-optical transduction and per-cell phase control enabled by optical displacement. To further exploit these capabilities, a non-convex sum-rate maximization problem is formulated over the optical positions and local oscillator design and solved via an alternating optimization framework with analytical gradients. Simulation results validate the derived model and demonstrate substantial performance gains enabled by optical movability, highlighting its potential as a programmable receiver architecture for future wireless networks.
The intrinsic integration of Rydberg atomic receivers into wireless communication systems is proposed, by harnessing the principles of quantum physics in wireless communications. More particularly, we conceive a pair of Rydberg atomic receivers, one incorporates a local oscillator (LO), referred to as an LO-dressed receiver, while the other operates without an LO and is termed an LO-free receiver. The appropriate wireless model is developed for each configuration, elaborating on the receiver's responses to the radio frequency (RF) signal, on the potential noise sources, and on the signal-to-noise ratio (SNR) performance. The developed wireless model conforms to the classical RF framework, facilitating compatibility with established signal processing methodologies. Next, we investigate the associated distortion effects that might occur, specifically identifying the conditions under which distortion arises and demonstrating the boundaries of linear dynamic ranges. This provides critical insights into its practical implementations in wireless systems. Finally, extensive simulation results are provided for characterizing the performance of wireless systems, harnessing this pair of Rydberg atomic receivers. Our results demonstrate that LO-dressed systems achieve a significant SNR gain of approximately 40~50 dB over conventional RF receivers in the standard quantum limit regime. This SNR head-room translates into reduced symbol error rates, enabling efficient and reliable transmission with higher-order constellations.
The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.
Rydberg atomic quantum receivers (RAQRs) have emerged as highly sensitive receivers for future communication and sensing systems. However, conventional RAQRs are primarily effective for single-carrier and narrowband reception, typically with an operational bandwidth of only a few hundred kilohertz. To enable the reception of multi-carrier signals with larger bandwidth, we propose a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) architecture based on a five-level quantum system model. We analyze the amplitude and phase of the output laser in MC-RAQR and extract the baseband electrical signal for signal processing. Furthermore, we quantify the performance of MC-RAQR in multi-carrier communication and sensing by studying the channel capacity and distance estimation, respectively. Numerical results show that the MC-RAQR is capable of achieving a bandwidth of 7.27.27.2 MHz, which is an order of magnitude larger than conventional RAQRs. Besides, compared to conventional receivers, MC-RAQR can improve the capacity and distance estimation by 181818-fold and 10310^3103-fold, respectively. This validates the superiority of MC-RAQR in receiving multi-carrier signal, and demonstrates its compatibility in detecting waveforms such as orthogonal frequency‐division multiplexing.
Rydberg atomic quantum receivers (RAQRs) have recently emerged as a promising technology for radio-frequency (RF) reception by directly transducing incident RF fields into optical signals. Existing receiver architectures, however, exploit only subsets of the dipole-allowed transitions within a given atomic manifold, limiting the number of simultaneously accessible RF channels. In this paper, a hybrid six-level Rydberg atomic quantum receiver (H-RAQR) is proposed by integrating parallel and cascaded RF coupling pathways within a single vapor-cell receiver. A communication-oriented analytical framework is developed by deriving a closed-form steady-state atom--field interaction model and establishing an equivalent baseband signal representation. The achievable ergodic sum rate is analyzed, and a resource-efficiency metric is introduced to quantify throughput per unit optical receiver resource. The analytical model is validated against full Lindblad master-equation simulations over its identified operating region. Numerical results show that the proposed H-RAQR supports four simultaneous RF channels within a single atomic system, achieves higher ergodic sum rate than conventional parallel Rydberg state (PRS) and cascade Rydberg state (CRS) receivers, and provides about 29% higher resource efficiency than a combined PRS-CRS deployment with equivalent four-band coverage. The proposed framework provides a scalable foundation for multi-band atomic wireless receivers.