Nitrogen-vacancy (NV) centers in diamond have attracted considerable attention for micro- and nanoscale thermometry owing to their high precision and spatial resolution. However, achieving sufficient electron spin polarization and signal-to-noise ratio (SNR) typically requires high-power or long-duration laser excitation, which introduces heating and degrades measurement accuracy and stability. To address this trade-off, a reinforcement learning (RL)-based approach is proposed to optimize spin polarization under low-heating constraints. First, a physical model integrating five-level optical pumping rates and NV spin polarization dynamics is established. A temperature-rise constraint model is then developed based on pulsed optically detected magnetic resonance (P-ODMR) measurements under varying laser powers and pulse widths in an external magnetic field. Subsequently, a Progressive Action-Space Q-learning (PAS-Q) algorithm is employed to explore the parameter space and identify optimal laser power and pulse-width combinations. The agent is trained through numerical simulations and the resulting strategy is implemented in a hardware system. Experimental results demonstrate a 44% reduction in laser-induced heating, a 33% increase in spin polarization rate based on T1 relaxation analysis, and a 71% reduction in optimization time compared with traditional methods. This approach enables efficient spin polarization with reduced laser heating and improved optimization efficiency, and may be extended to other heat-sensitive quantum spin sensors, including silicon-vacancy centers in diamond and divacancy defects in silicon carbide.
AI Summary
NV-center thermometry faces a trade-off between optical spin polarization and laser-induced heating: stronger or longer excitation can improve readout signal but perturb the temperature being measured. This paper investigates whether reinforcement learning can select laser power and pulse duration to improve polarization while limiting heating.
The approach combines a five-level optical-pumping rate model with NV spin-polarization dynamics. A temperature-rise constraint is constructed using pulsed optically detected magnetic resonance measurements at different laser powers and pulse widths in an external magnetic field. A Progressive Action-Space Q-learning (PAS-Q) algorithm searches for operating parameters within these constraints. The agent is trained in numerical simulations, and the resulting strategy is subsequently implemented experimentally.
The abstract reports a 44% reduction in laser-induced heating, a 33% increase in spin polarization rate inferred from $T_1$ relaxation analysis, and a 71% reduction in optimization time relative to traditional methods. It does not specify the comparison procedures, absolute heating or polarization values, uncertainties, or resulting thermometric sensitivity and accuracy, so the practical measurement gains cannot be quantified from these percentages alone.
Only the title and abstract are available; no explicit limitations are stated there. The experimental demonstration concerns NV centers, while application to silicon-vacancy centers in diamond and divacancies in silicon carbide is proposed rather than demonstrated.
Little sign of AI-generated textIncrementalMissing comparisonUnclear novelty
Written by gpt-6.1-sol from the abstract only. Automated: it can be wrong.
Nitrogen-vacancy (NV) centers in diamond have attracted considerable attention for micro- and nanoscale thermometry owing to their high precision and spatial resolution. However, achieving sufficient electron spin polarization and signal-to-noise ratio (SNR) typically requires high-power or long-duration laser excitation, which introduces heating and degrades measurement accuracy and stability. To address this trade-off, a reinforcement learning (RL)-based approach is proposed to optimize spin polarization under low-heating constraints. First, a physical model integrating five-level optical pumping rates and NV spin polarization dynamics is established. A temperature-rise constraint model is then developed based on pulsed optically detected magnetic resonance (P-ODMR) measurements under varying laser powers and pulse widths in an external magnetic field. Subsequently, a Progressive Action-Space Q-learning (PAS-Q) algorithm is employed to explore the parameter space and identify optimal laser power and pulse-width combinations. The agent is trained through numerical simulations and the resulting strategy is implemented in a hardware system. Experimental results demonstrate a 44% reduction in laser-induced heating, a 33% increase in spin polarization rate based on T1 relaxation analysis, and a 71% reduction in optimization time compared with traditional methods. This approach enables efficient spin polarization with reduced laser heating and improved optimization efficiency, and may be extended to other heat-sensitive quantum spin sensors, including silicon-vacancy centers in diamond and divacancy defects in silicon carbide.
NV-center thermometry faces a trade-off between optical spin polarization and laser-induced heating: stronger or longer excitation can improve readout signal but perturb the temperature being measured. This paper investigates whether reinforcement learning can select laser power and pulse duration to improve polarization while limiting heating.
The approach combines a five-level optical-pumping rate model with NV spin-polarization dynamics. A temperature-rise constraint is constructed using pulsed optically detected magnetic resonance measurements at different laser powers and pulse widths in an external magnetic field. A Progressive Action-Space Q-learning (PAS-Q) algorithm searches for operating parameters within these constraints. The agent is trained in numerical simulations, and the resulting strategy is subsequently implemented experimentally.
The abstract reports a 44% reduction in laser-induced heating, a 33% increase in spin polarization rate inferred from T1 relaxation analysis, and a 71% reduction in optimization time relative to traditional methods. It does not specify the comparison procedures, absolute heating or polarization values, uncertainties, or resulting thermometric sensitivity and accuracy, so the practical measurement gains cannot be quantified from these percentages alone.
Only the title and abstract are available; no explicit limitations are stated there. The experimental demonstration concerns NV centers, while application to silicon-vacancy centers in diamond and divacancies in silicon carbide is proposed rather than demonstrated.
The nitrogen-vacancy (NV) center in diamond has been developed as a promising platform for quantum sensing, especially for magnetic field measurements in the nano-tesla range with a nano-meter resolution. Optical spin readout performance has a direct effect on the signal-to-noise ratio (SNR) of experiments. In this work, we introduce an online optimization method to customize the laser waveform for readout. Both simulations and experiments reveal that our new scheme optimizes the optically detected magnetic resonance in NV center. The SNR of optical spin readout has been witnessed a 44.1% increase in experiments. In addition, we applied the scheme to the Rabi oscillation experiment, which shows an improvement of 46.0% in contrast and a reduction of 12.1% in mean deviation compared to traditional constant laser power SNR optimization. This scheme is promising to improve sensitivities for a wide range of NV-based applications in the future.
The nitrogen-vacancy (NV) centers in diamond have the advantages of stable triaxial structure, ultra-long electron spin coherence time and simple optical readout at room temperature. A nitrogen atom in the diamond crystal replaces a carbon atom and a vacancy is generated at the adjacent position, forming a point defect in the C3v space group structure. Its ground state and excited state are both spin triplet states. It is the key to achieving efficient preparation of optical initial state and extracting NV color center’s information in the researches of highly sensitive sensing magnetic detection, temperature detection, biological imaging, quantum computing, etc. However, there was no systematic study on relevant parameters of laser for high-concentration NV color center’s samples in previous experimental studies. Based on a high concentration diamond NV ensemble, we use pulsed optical detection magnetic resonance (ODMR) technology to systematically study the relationship among laser initial polarization time, information reading time and laser power, and the influence of laser incident polarization angle on the accuracy of sensing information. The effects of various laser parameters on the NV1 peak of ODMR on the [111] axis of the NVs of diamond are also investigated. The contrast of ODMR increases firstly with a sigmoid function and then decreases with an e-exponential function as the information reading time increases. The incident polarization angle of the laser is sinusoidal, with a period of 90°. According to the above experimental results, we finally choose the appropriate experimental parameters at 45.8 W/cm2 (300 μs of polarization, 700 ns, reading time, laser incident angle is 220°) for ODMR test. Compared with previous experimental parameters (polarization time was 50 us, read the time of 3000 ns, laser incident angle was 250°), the experimental results show that the contrast of ODMR increases from 2.1% to 4.6%, and the typical magnetic sensitivity is improved from 21.6 nT/Hz1/2 to 5.6 nT/Hz1/2. The optimization of the optical control of NVs in solid diamond is realized. The above results provide an effective support for the detection of high-sensitivity manipulation sensing based on high-concentration NV ensemble.
Nitrogen-vacancy (NV) centers in diamond are a versatile quantum sensing platform for high sensitivity measurements of magnetic fields, temperature and strain with nanoscale spatial resolution. A common bottleneck is the analysis of optically detected magnetic resonance (ODMR) spectra, where target quantities are encoded in resonance features. Conventional nonlinear fitting is often computationally expensive, sensitive to initialization, and prone to failure at low signal-to-noise ratio (SNR). Here we introduce a robust, efficient machine learning (ML) framework for real-time ODMR analysis based on a one-dimensional convolutional neural network (1D-CNN). The model performs direct parameter inference without initial guesses or iterative optimization, and is naturally parallelizable on graphics processing units (GPU) for high-throughput processing. We validate the approach on both synthetic and experimental datasets, showing improved throughput, accuracy and robustness than standard nonlinear fitting, with the largest gains in the low-SNR regime. We further validate our methods in two representative sensing applications: diagnosing intracellular temperature changes using nanodiamond probes and widefield magnetic imaging of superconducting vortices in a high-temperature superconductor. This deep-learning inference framework enables fast and reliable extraction of physical parameters from complex ODMR data and provides a scalable route to real-time quantum sensing and imaging.
The nitrogen-vacancy (NV) center in diamond is a leading solid-state platform for room-temperature quantum magnetometry owing to its long spin coherence times, optical spin initialization and readout, and high sensitivity to magnetic, electric, and thermal perturbations. As NV-based optically detected magnetic resonance (ODMR) systems transition from controlled laboratory environments toward portable and field-deployable sensors, a detailed understanding of realistic noise sources and experimental imperfections becomes essential for optimizing performance and sensitivity. In this work, we present a comprehensive simulation framework, i.e., a digital twin, for continuous-wave wide-field ODMR in NV-center ensembles. The model is built upon a physically consistent seven-level description of the NV center and incorporates a broad range of experimentally relevant noise and imperfection mechanisms as modular, parameterized components. These include laser and microwave amplitude fluctuations, microwave phase noise, uncertainty in the NV gyromagnetic ratio, spin dephasing, temperature-induced shifts of the ground-state zero-field splitting, surface-induced magnetic field perturbations, and photon shot noise. Power broadening and contrast degradation arising from optical and microwave driving are captured self-consistently through linewidth calculations. Also, the spatial inhomogeneity is modeled via a Gaussian laser intensity profile across the sensing region...
Nitrogen-vacancy (NV) color centers in diamond serve as promising atomic spin systems for measurement applications requiring high accuracy and sensitivity. A key challenge in NV-based quantum sensing is minimizing spin readout noise to approach the standard quantum limit (SQL). Based on a six-level model, this work analyze the dependence of NV-based quantum sensing performance, including spin state readout noise and signal-to-noise ratio (SNR), on controllable parameters such as the Purcell factor and excitation laser pulse characteristics. This study demonstrates that a shorter excitation pulse duration results in a higher saturation value of ground-state spin polarization, while the total time required for the polarization process remains constant. Additionally, the spin readout noise does not improve monotonically with decreasing excitation pulse duration; instead, it initially decreases and subsequently increases as the pulse duration varies. The spin readout noise reaches its optimal level when the pulse duration is 3 ns. Furthermore, no positive correlation exists between the signal-to-noise ratio (SNR) and the Purcell factor, and there is also an optimal value for SNR. When the pulse duration ranges from 1 ns to 40 ns, the variation in SNR is relatively insignificant. This research offers a novel perspective for enhancing the performance of quantum sensing based on diamond defects, such as nitrogen-vacancy (NV) centers.
The spin dynamics of the negatively charged nitrogen-vacancy (NV − ) centers in diamond are highly sensitive to quantum electromagnetic fluctuations arising from optical excitation, chemical interactions, and thermal processes. Here we investigated the optical and spin properties of ensembles of NV − centers in diamond under continuous-wave (CW) and nanosecond pulsed laser excitation. Optical detection of magnetic resonance (ODMR) is employed to monitor laser induced shifts of the zero-field splitting parameter D under ambient and high-vacuum conditions. Increasing CW laser power results in a systematic downshift of the resonance frequency due to laser-induced heating. The effect is significantly enhanced under vacuum, where the shift in D reaches up to ~17 MHz, compared to ~5 MHz in air, emphasizing the role of environmental thermal dissipation. Under nanosecond pulsed excitation, increasing the pulse repetition rate similarly leads to resonance shifts and reduced ODMR contrast, consistent with cumulative thermal effects. Spectroscopy confirms power dependent modifications of NV emission. Time resolved photoluminescence measurements showed that the excited-state lifetime (~6 ns) remains nearly constant across the investigated excitation range, indicating that in this regime the dominant limitation is thermal loading of the spin resonance rather than a change in intrinsic radiative decay dynamics. These results provide a comprehensive characterization of thermal effects in high power optical excitation of NV ensembles and are directly relevant for high intensity NV-based sensing and spectroscopy, particularly in vacuum environments.