Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.03609

The QICK Box: A Modular RF Front-End System for Quantum Control and Readout

L. Arnaldi, D. Martin, S. Sussman, S. Uemura, K. Treptow, N. Wilcer, A. Colón Cesaní, O. Seidel, K. Anyang, G. Bratrud, F. Abouzahr, J. Christiansen-Salameh, D. Baxter, G. Cancelo

quant-phphysics.ins-detSubmitted Oct 2, 2026• Announced Oct 5, 2026• 0 citations
arXivHTMLPDF

Abstract

The QICK (Quantum Instrumentation Control Kit), first introduced in 2022, is a standalone open source control system for quantum information science. Since then, QICK has been migrated to new hardware platforms, expanded its functionality for applications with different types of qubits (superconducting, atomic, ion-trapped, and spin defects), as well as quantum sensors, and quantum networks. QICK is a highly optimized control kit, with a library of functions that can be used for more than one application. In particular, the software and firmware are customized to minimize latency and maximize control performance and throughput. In this white paper, we describe hardware details and performance of the QICK Box. The QICK Box features up to 16 outputs, up to 8 inputs, and 8 20-bit DC biases. Modular output and input daughtercards give the choice of signal chains optimized for fast DC-coupled signals or RF signals up to 10 GHz. Power levels, step attenuation, and bandpass filtering are controlled by software. We demonstrate the system's performance through single-shot readout measurements of a six-transmon device at the Quantum Underground Instrumentation Experimental Testbed (QUIET) at Fermilab, achieving (91.7 +/- 0.4)% readout fidelity limited by T1 decay during the readout. The single shot readout signal-to-noise ratio (SNR) is 4.4 +/- 0.1 without a quantum amplifier, confirming that the QICK Box is suitable for high-fidelity quantum control and measurement applications. Advances in firmware and software will be described in a separate paper.

Related papers

The QICK (Quantum Instrumentation Control Kit): Readout and control for qubits and detectors

Leandro Stefanazzi, Kenneth Treptow, Neal Wilcer +14 more

We introduce a Xilinx RF System-on-Chip (RFSoC)-based qubit controller (called the Quantum Instrumentation Control Kit, or QICK for short), which supports the direct synthesis of control pulses with carrier frequencies of up to 6 GHz. The QICK can control multiple qubits or other quantum devices. The QICK consists of a digital board hosting an RFSoC field-programmable gate array, custom firmware, and software and an optional companion custom-designed analog front-end board. We characterize the analog performance of the system as well as its digital latency, important for quantum error correction and feedback protocols. We benchmark the controller by performing standard characterizations of a transmon qubit. We achieve an average gate fidelity of Favg=99.93%. All of the schematics, firmware, and software are open-source.

arXiv:2110.00557•Review of Scientific Instruments•Apr 1, 2022•140 citations

Quantum Instrumentation Control Kit -- Defect Arbitrary Waveform Generator (QICK-DAWG): A Quantum Sensing Control Framework for Quantum Defects

Emmeline G. Riendeau, Luca Basso, Jasmine J. Mah +8 more

Quantum information communication, sensing, and computation often require complex and expensive instrumentation resulting in a large entry barrier. The Quantum Instrumentation Control Kit (QICK) overcomes this barrier for superconducting qubits with a collection of software and firmware for state-of-the-art radio frequency system on chip (RFSoC's) field programmable gate architecture (FPGA) chips. Here we present a software and firmware extension to QICK, the Quantum Instrumentation Control Kit - Defect Arbitrary Waveform Generator (QICK-DAWG), which is an open-source software and firmware package that supports full quantum control and measurement of nitrogen-vacancy defects in diamond and other quantum defects using RFSoC FPGAs. QICKDAWG extends QICK to the characterization of nitrogen-vacancy defects and other diamond quantum defects by implementing DC-1 GHz readout, AOM or gated laser control, and analog or photon counting readout options. QICK-DAWG also adds pulse sequence programs and data analysis scripts to collect and characterize photoluminescence (PL) intensity, optically detected magnetic resonance (ODMR) spectra, PL readout windows, Rabi oscillations, Ramsay interference spectra, Hahn echo spin-spin relaxation times T$_2$, and spin-lattice relaxation times T$_1$. We demonstrate that QICK-DAWG is a powerful new paradigm of open source quantum hardware that significantly lowers the entry barrier and cost for quantum sensing using quantum defects.

arXiv:2311.18253•Nov 30, 2023•2 citations

Experimental advances with the QICK (Quantum Instrumentation Control Kit) for superconducting quantum hardware

Chunyang Ding, Martın Di Federico, Michael Hatridge +14 more

The Quantum Instrumentation Control Kit (QICK) is a standalone open-source qubit controller that was first introduced in 2022. In this follow-up work, we present recent upgrades to the QICK and the experimental use cases they uniquely enabled for superconducting qubit systems. These include multiplexed signal generation and readout, mixer-free readout, predistorted fast flux pulses, and phase-coherent pulses for parametric operations, including high-fidelity parametric entangling gates. We explain in detail how the QICK was used to enable these experiments. Published by the American Physical Society 2024

arXiv:2311.17171•Physical Review Research•Mar 20, 2024•23 citations

Manarat: A scalable QICK-based control system for superconducting quantum processors supporting synchronized control of 10 flux-tunable qubits

Agustin Silva, Alvaro Orgaz Fuertes

A scalable control architecture for superconducting quantum processors is essential as the number of qubits increases and coherent multi-qubit operations span beyond the capacity of a single control module. The Quantum Instrumentation Control Kit (QICK), built on AMD RFSoC platforms, offers a flexible open-source framework for pulse-level qubit control but lacks native support for multi-board synchronization, limiting its applicability to mid- and large-scale quantum devices. To overcome this limitation, we introduce Manarat, a scalable multi-board control platform based on QICK that incorporates hardware, firmware, and software enhancements to enable sub-100 ps timing alignment across multiple AMD ZCU216 RFSoC boards. Our system integrates a low-jitter clock distribution network, modifications to the tProcessor, and a synchronization scheme to ensure deterministic alignment of program execution across boards. It also includes a custom analog front-end for flux control that combines high-speed RF signals with software-programmable DC biasing voltages generated by a low-noise, high-precision DAC. These capabilities are complemented by a software stack capable of orchestrating synchronized multi-board experiments and fully integrated with the open-source Qibo framework for quantum device calibration and algorithm execution. We validate Manarat on a 10-qubit superconducting processor controlled by two RFSoC boards, demonstrating reliable execution of synchronized control sequences for cross-board CZ gate calibration. These results confirm that sub-nanosecond synchronization and coherent control are achievable across multiple RFSoC boards, enabling scalable operation of superconducting quantum computers.

arXiv:2507.10676•Review of Scientific Instruments•Feb 1, 2026•1 citation

Superconducting qubit readout and control system based on FPGA and development of a pulse sequencer

BOVE, LEONARDO

This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.

•Sep 27, 2025•0 citations

FIREQ: FPGA Instrumentation for Readout and Qubit control

Giuseppe La Capra, Fabio Calabrese, Giorgio D'Amico +8 more

We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.

quant-pharXiv:2608.29399•Sep 1, 2026•0 citations
The QICK (Quantum Instrumentation Control Kit), first introduced in 2022, is a standalone open source control system for quantum information science. Since then, QICK has been migrated to new hardware platforms, expanded its functionality for applications with different types of qubits (superconducting, atomic, ion-trapped, and spin defects), as well as quantum sensors, and quantum networks. QICK is a highly optimized control kit, with a library of functions that can be used for more than one application. In particular, the software and firmware are customized to minimize latency and maximize control performance and throughput. In this white paper, we describe hardware details and performance of the QICK Box. The QICK Box features up to 16 outputs, up to 8 inputs, and 8 20-bit DC biases. Modular output and input daughtercards give the choice of signal chains optimized for fast DC-coupled signals or RF signals up to 10 GHz. Power levels, step attenuation, and bandpass filtering are controlled by software. We demonstrate the system's performance through single-shot readout measurements of a six-transmon device at the Quantum Underground Instrumentation Experimental Testbed (QUIET) at Fermilab, achieving (91.7 +/- 0.4)% readout fidelity limited by T1 decay during the readout. The single shot readout signal-to-noise ratio (SNR) is 4.4 +/- 0.1 without a quantum amplifier, confirming that the QICK Box is suitable for high-fidelity quantum control and measurement applications. Advances in firmware and software will be described in a separate paper.
We introduce a Xilinx RF System-on-Chip (RFSoC)-based qubit controller (called the Quantum Instrumentation Control Kit, or QICK for short), which supports the direct synthesis of control pulses with carrier frequencies of up to 6 GHz. The QICK can control multiple qubits or other quantum devices. The QICK consists of a digital board hosting an RFSoC field-programmable gate array, custom firmware, and software and an optional companion custom-designed analog front-end board. We characterize the analog performance of the system as well as its digital latency, important for quantum error correction and feedback protocols. We benchmark the controller by performing standard characterizations of a transmon qubit. We achieve an average gate fidelity of Favg=99.93%. All of the schematics, firmware, and software are open-source.
Quantum information communication, sensing, and computation often require complex and expensive instrumentation resulting in a large entry barrier. The Quantum Instrumentation Control Kit (QICK) overcomes this barrier for superconducting qubits with a collection of software and firmware for state-of-the-art radio frequency system on chip (RFSoC's) field programmable gate architecture (FPGA) chips. Here we present a software and firmware extension to QICK, the Quantum Instrumentation Control Kit - Defect Arbitrary Waveform Generator (QICK-DAWG), which is an open-source software and firmware package that supports full quantum control and measurement of nitrogen-vacancy defects in diamond and other quantum defects using RFSoC FPGAs. QICKDAWG extends QICK to the characterization of nitrogen-vacancy defects and other diamond quantum defects by implementing DC-1 GHz readout, AOM or gated laser control, and analog or photon counting readout options. QICK-DAWG also adds pulse sequence programs and data analysis scripts to collect and characterize photoluminescence (PL) intensity, optically detected magnetic resonance (ODMR) spectra, PL readout windows, Rabi oscillations, Ramsay interference spectra, Hahn echo spin-spin relaxation times T2_22​, and spin-lattice relaxation times T1_11​. We demonstrate that QICK-DAWG is a powerful new paradigm of open source quantum hardware that significantly lowers the entry barrier and cost for quantum sensing using quantum defects.
The Quantum Instrumentation Control Kit (QICK) is a standalone open-source qubit controller that was first introduced in 2022. In this follow-up work, we present recent upgrades to the QICK and the experimental use cases they uniquely enabled for superconducting qubit systems. These include multiplexed signal generation and readout, mixer-free readout, predistorted fast flux pulses, and phase-coherent pulses for parametric operations, including high-fidelity parametric entangling gates. We explain in detail how the QICK was used to enable these experiments. Published by the American Physical Society 2024
A scalable control architecture for superconducting quantum processors is essential as the number of qubits increases and coherent multi-qubit operations span beyond the capacity of a single control module. The Quantum Instrumentation Control Kit (QICK), built on AMD RFSoC platforms, offers a flexible open-source framework for pulse-level qubit control but lacks native support for multi-board synchronization, limiting its applicability to mid- and large-scale quantum devices. To overcome this limitation, we introduce Manarat, a scalable multi-board control platform based on QICK that incorporates hardware, firmware, and software enhancements to enable sub-100 ps timing alignment across multiple AMD ZCU216 RFSoC boards. Our system integrates a low-jitter clock distribution network, modifications to the tProcessor, and a synchronization scheme to ensure deterministic alignment of program execution across boards. It also includes a custom analog front-end for flux control that combines high-speed RF signals with software-programmable DC biasing voltages generated by a low-noise, high-precision DAC. These capabilities are complemented by a software stack capable of orchestrating synchronized multi-board experiments and fully integrated with the open-source Qibo framework for quantum device calibration and algorithm execution. We validate Manarat on a 10-qubit superconducting processor controlled by two RFSoC boards, demonstrating reliable execution of synchronized control sequences for cross-board CZ gate calibration. These results confirm that sub-nanosecond synchronization and coherent control are achievable across multiple RFSoC boards, enabling scalable operation of superconducting quantum computers.
This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.
We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.