High-fidelity single- and two-qubit gates are essential building blocks for a fault-tolerant quantum computer. While there has been much progress in suppressing single-qubit gate errors in superconducting qubit systems, two-qubit gates still suffer from error rates that are orders of magnitude higher. One limiting factor is the residual ZZ-interaction, which originates from a coupling between computational states and higher-energy states. While this interaction is usually viewed as a nuisance, here we experimentally demonstrate that it can be exploited to produce a universal set of fast single- and two-qubit entangling gates in a coupled transmon qubit system. To implement arbitrary single-qubit rotations, we design a new protocol called the two-axis gate that is based on a three-part composite pulse. It rotates a single qubit independently of the state of the other qubit despite the strong ZZ-coupling. We achieve single-qubit gate fidelities as high as 99.1% from randomized benchmarking measurements. We then demonstrate both a CZ gate and a CNOT gate. Because the system has a strong ZZ-interaction, a CZ gate can be achieved by letting the system freely evolve for a gate time
tg=53.8 ns. To design the CNOT gate, we utilize an analytical microwave pulse shape based on the SWIPHT protocol for realizing fast, low-leakage gates. We obtain fidelities of 94.6% and 97.8% for the CNOT and CZ gates respectively from quantum progress tomography.
A possible building block for a scalable quantum computer has recently been demonstrated [Mariantoni et al., Science 334, 61 (2011)]. This architecture consists of superconducting qubits capacitively coupled both to individual memory resonators as well as a common bus. In this work we study a natural primitive entangling gate for this and related resonator-based architectures, which consists of a controlled-${\ensuremath{\sigma}}^{z}$ (cz) operation between a qubit and the bus. The cz gate is implemented with the aid of the noncomputational qubit $|2\ensuremath{\rangle}$ state [Strauch et al., Phys. Rev. Lett. 91, 167005 (2003)]. Assuming phase or transmon qubits with 300 MHz anharmonicity, we show that by using only low frequency qubit-bias control it is possible to implement the qubit-bus cz gate with 99.9
(99.99
) fidelity in about
17ns (
23ns) with a realistic two-parameter pulse profile, plus two auxiliary
z rotations. The fidelity measure we refer to here is a state-averaged intrinsic process fidelity, which does not include any effects of noise or decoherence. These results apply to a multiqubit device that includes strongly coupled memory resonators. We investigate the performance of the qubit-bus cz gate as a function of qubit anharmonicity, identify the dominant intrinsic error mechanism and derive an associated fidelity estimator, quantify the pulse shape sensitivity and precision requirements, simulate qubit-qubit cz gates that are mediated by the bus resonator, and also attempt a global optimization of system parameters including resonator frequencies and couplings. Our results are relevant for a wide range of superconducting hardware designs that incorporate resonators and suggest that it should be possible to demonstrate a
99.9 cz gate with existing transmon qubits, which would constitute an important step towards the development of an error-corrected superconducting quantum computer.
We propose a simple scheme for generating a high-fidelity controlled-Z (CZ) gate in a three-component qubit/bus/qubit device. The corresponding tune/detune pulse is single-step, with a near-resonant constant undershoot between the 200 and 101 states. During the pulse, the frequency of the first qubit is kept fixed, while the frequency of the second qubit is varied in such a way as to bring the 200 and 101 states close to resonance. As a result, the phase of the 101 state is accumulated via the corresponding second-order anticrossing. For experimentally realistic qubit frequencies and a 75 MHz coupling (150 MHz splitting), a 45 ns gate time can be realized with >99.99% intrinsic fidelity, with errors arising due to the non-adiabaticity of the ramps. The CZ pulse is characterized by two adjustable parameters: the undershoot magnitude and undershoot duration. The pulse does not load an excitation into the bus. This by-passes the previously proposed need for two additional qubit-to-bus and bus-to-qubit MOVE operations. Combined with the recently predicted high-fidelity idling operation in the RezQu architecture [A. Galiautdinov, J. Martinis, A. Korotkov (unpublished)], this controlled-Z scheme may prove useful for implementations on the first generation quantum computers.
Abstract The ability to tune qubits to flat points in their energy dispersions (“sweet spots”) is an important tool for mitigating the effects of charge noise and dephasing in solid-state devices. However, the number of derivatives that must be simultaneously set to zero grows exponentially with the number of coupled qubits, making the task untenable for as few as two qubits. This is a particular problem for adiabatic gates, due to their slower speeds. Here, we propose an adiabatic two-qubit gate for quantum dot hybrid qubits, based on the tunable, electrostatic coupling between distinct charge configurations. We confirm the absence of a conventional sweet spot, but show that controlled-Z (CZ) gates can nonetheless be optimized to have fidelities of ~99% for a typical level of quasistatic charge noise (σε ≃ 1 μeV). We then develop the concept of a dynamical sweet spot (DSS), for which the time-averaged energy derivatives are set to zero, and identify a simple pulse sequence that achieves an approximate DSS for a CZ gate, with a 5× improvement in the fidelity. We observe that the results depend on the number of tunable parameters in the pulse sequence, and speculate that a more elaborate sequence could potentially attain a true DSS.
Single-flux-quantum (SFQ) digital circuitry has great potential in building a scalable control system of superconducting qubits. In this work, we describe a practical SFQ-based two-qubit gate for transmon qubits. The controlled-
Z (CZ) gate is activated by near-resonant SFQ-pulse trains near the target transition involving the second excited state. Numerical simulations show that the fidelity of a SFQ-activated CZ gate in excess of 99.9% is achievable within 100-ns gate time. We evaluate the CZ gate error caused by leakage and SFQ-pulse width. Combined with the proposed feasible expansion methods, this work is a supplement to the scalable and integratable superconducting-qubit control system based on SFQ digital logic.
The main source of error for superconducting quantum processors today is two-qubit gates, so understanding what limits their fidelity is central to improving these devices. This thesis studies the controlled-Z (CZ) gate between two transmon qubits, realized by tuning the
∣11⟩ and
∣20⟩ states through an avoided crossing with a flux pulse. There are two primary errors inherent to this approach. The first is leakage into non-computational states like
∣20⟩; the second is an exchange error from population transferring between the single-excitation states
∣01⟩ and
∣10⟩. Using a closed-system simulation, this work compares four flux-pulse shapes (unipolar, net-zero bipolar, Gaussian-filtered bipolar, and adiabatic) and constructs a CNOT from each CZ. The central question is which error channel sets the gate fidelity, and whether the widely used net-zero pulse, known to protect neighboring qubits, also helps inside the gate itself. An important finding of this research is that every type of flux pulse has an average gate fidelity limited by exchange error rather than leakage. While the exchange error is not apparent in the return of the
∣11⟩ population, because excitation-number conservation prevents
∣11⟩ from entering the single-excitation sector, it does appear as an off-diagonal term in the CZ unitary, and subsequently in the CNOT. A second finding concerns the net-zero pulse: although its zero net flux integral cancels the first-order phase imprinted on neighboring qubits, it does not suppress the exchange error. The strong suppression observed in the analytic bipolar gate happens because its idle time leaves the exchange oscillation near a cancellation point at the end of the gate, not because the pulse is net-zero. The flux operating point predicted by the simulation was tested on a physical transmon device accessed remotely, where a square pulse produced a
180∘ conditional phase close to the simulated flux and duration. Because the model is closed-system, the reported fidelities describe the coherent error of each pulse rather than the total infidelity of a physical device.