Error Correction in a Distributed Quantum Computer
E. M. Ainley, A. Agrawal, T. Araki, A. R. Martínez, D. Main, E. Malinowski, J. A. Blackmore, S. Chen, P. Drmota, M. Mallweger, D. P. Nadlinger, R. Srinivas, S. C. Benjamin, G. Araneda, D. M. Lucas
quant-phSubmitted Sep 11, 2026• Announced Sep 14, 2026• 0 citations
Building fault-tolerant quantum computers with large numbers of logical qubits requires both scalable hardware architectures and error-correcting codes that make efficient use of physical qubits. Photonic interconnects address both of these challenges by allowing the physical qubits to be distributed across multiple processors while providing the non-local connectivity necessary to implement resource-efficient codes such as high-rate quantum low-density parity-check (qLDPC) codes. A key requirement for realising this architecture is the ability to perform stabiliser measurements between remote processors, which has not previously been demonstrated experimentally. Here we report the first experimental demonstration of distributed quantum error detection and correction. We generate entanglement between network qubits in two separate trapped-ion processors and use it to perform remote syndrome measurements on data qubits. We first realise a distributed [[2, 1, 1]] repetition code, detecting phase-flip errors on a logical qubit encoded across the two modules in real time and suppressing logical errors. We then combine these mid-circuit syndrome measurements with real-time feedforward to actively correct arbitrary single-qubit Pauli errors on a distributed Bell state. These results provide an experimental foundation for quantum error correction (QEC) across modular quantum architectures.
Building fault-tolerant quantum computers with large numbers of logical qubits requires both scalable hardware architectures and error-correcting codes that make efficient use of physical qubits. Photonic interconnects address both of these challenges by allowing the physical qubits to be distributed across multiple processors while providing the non-local connectivity necessary to implement resource-efficient codes such as high-rate quantum low-density parity-check (qLDPC) codes. A key requirement for realising this architecture is the ability to perform stabiliser measurements between remote processors, which has not previously been demonstrated experimentally. Here we report the first experimental demonstration of distributed quantum error detection and correction. We generate entanglement between network qubits in two separate trapped-ion processors and use it to perform remote syndrome measurements on data qubits. We first realise a distributed [[2, 1, 1]] repetition code, detecting phase-flip errors on a logical qubit encoded across the two modules in real time and suppressing logical errors. We then combine these mid-circuit syndrome measurements with real-time feedforward to actively correct arbitrary single-qubit Pauli errors on a distributed Bell state. These results provide an experimental foundation for quantum error correction (QEC) across modular quantum architectures.
Quantum low density parity check (qLDPC) codes, particularly bivariate bicycle (BB) codes, achieve competitive fault tolerance thresholds while offering substantially higher encoding rates than planar surface codes. However, their intrinsically long-range stabilizer structure makes them difficult to implement on monolithic devices with nearest neighbor connectivity and limited qubit capacity. In this work, we study the realization of a BB code in a modular multiprocessor architecture, where quantum processors are interconnected through shared Bell pairs. We consider processors with all to all internal connectivity, which is feasible on trapped ion and neutral atom platforms, enabling flexible local gate execution while inter-processor (nonlocal) gates are mediated by shared entanglement. We describe a star network architecture that can realize this distributed setting. We partition the qubits of the [[144,12,12]] BB code across 4, 6, and 12 quantum processors and analyze the resulting logical error rates and pseudo-threshold performance under circuit level noise by varying the number of processors and a scaling factor that captures the additional noise associated with nonlocal operations. We use Monte Carlo simulations with BP+OSD decoding and extend the previously known BB code ansatz to the distributed setting. Our results provide architectural insight and design considerations for distributed BB codes in modular quantum computing architectures.
Correcting errors in real time is essential for reliable large-scale quantum computations. Realizing this high-level function requires a system capable of several low-level primitives, including single-qubit and two-qubit operations, mid-circuit measurements of subsets of qubits, real-time processing of measurement outcomes, and the ability to condition subsequent gate operations on those measurements. In this work, we use a ten qubit QCCD trapped-ion quantum computer to encode a single logical qubit using the [[7,1,3]] color code, first proposed by Steane~\cite{steane1996error}. The logical qubit is initialized into the eigenstates of three mutually unbiased bases using an encoding circuit, and we measure an average logical SPAM error of 1.7(6)×10−3, compared to the average physical SPAM error 2.4(8)×10−3 of our qubits. We then perform multiple syndrome measurements on the encoded qubit, using a real-time decoder to determine any necessary corrections that are done either as software updates to the Pauli frame or as physically applied gates. Moreover, these procedures are done repeatedly while maintaining coherence, demonstrating a dynamically protected logical qubit memory. Additionally, we demonstrate non-Clifford qubit operations by encoding a logical magic state with an error rate below the threshold required for magic state distillation. Finally, we present system-level simulations that allow us to identify key hardware upgrades that may enable the system to reach the pseudo-threshold.
High-rate quantum low-density parity-check (qLDPC) codes are a leading candidate for fault-tolerant quantum computing. They feature higher encoding rates than planar alternatives such as the surface code, but their implementation often entails significant hardware hurdles like the need for long-range couplers. We leverage the flexibility of a trapped-ion quantum computer to demonstrate nine quantum error-correcting codes with starkly different qubit connectivity requirements on a single device without any hardware reconfiguration. These experiments span three families of quantum error-correcting codes: qLDPC codes, topological codes, and concatenated codes. With a qLDPC code encoding 4 logical qubits into 18 physical qubits, we achieve a logical error rate up to 9× better than a previous demonstration of a similar code on superconducting solid-state qubits. Moreover, our implementation exhibits breakeven performance, with some instances achieving qubit lifetimes comparable to or slightly exceeding that of our trapped-ion qubits. We use a novel implementation of the optical-metastable-ground (OMG) architecture for addressable mid-circuit measurement and reset, which enables us to perform these experiments without any ion transport or dedicated coolant ions, requirements that typically consume a large fraction of the runtime or ion count of trapped-ion quantum computers.
Quantum computation promises to revolutionize information processing by exploiting superposition and entanglement, enabling applications such as quantum simulation, combinatorial optimization, and secure quantum communication. Beyond individual processors, the quantum internet aims to connect quantum nodes through entanglement distribution, enabling distributed computation. However, quantum states are fragile: environmental interactions, imperfect gate operations, and measurement errors can quickly degrade encoded information. Reliable quantum computation therefore requires carefully designed quantum error-correcting codes and fault-tolerant protocols. Unlike classical redundancy schemes, quantum error correction must preserve delicate phase relationships and relies on indirect error detection through syndrome extraction with ancillary qubits, enabling error identification without collapsing encoded states. Topological codes, in particular, emerged early as the preferred choice for many architectures due to their planar structure, local interactions, and natural support for fault-tolerant logical operations. Color codes, for instance, allow transversal implementation of all Clifford gates, whereas non-Clifford operations require magic-state injection. More recent constructions, including quantum low-density parity-check codes, offer higher encoding rates and reduced resource overhead, but require long-range qubit connectivity and more complex protocols. Despite experimental progress, several challenges remain. Many platforms exhibit biased noise, motivating codes that exploit channel asymmetry. Real-time decoding remains a critical bottleneck, as fault-tolerant computation requires low-latency processing of rapidly generated syndrome data. Fault-tolerant logical state initialization also remains resource-intensive and scales poorly with code distance. Addressing these challenges, this thesis develops a unified framework spanning theory and experiment. It provides precise performance analysis of quantum error-correcting codes in the low physical error-rate regime, introduces codes tailored to biased noise, develops fast low-complexity decoding algorithms for real-time operation, and presents modular and efficient protocols for fault-tolerant state preparation of CSS codes. The latter is demonstrated experimentally through the preparation of a logical zero state of the Golay code on the Quantinuum H2 trapped-ion quantum computer.
Distributed quantum computing (DQC) combines the computing power of multiple networked quantum processing modules, ideally enabling the execution of large quantum circuits without compromising performance or connectivity. Photonic networks are well-suited as a versatile and reconfigurable interconnect layer for DQC; remote entanglement shared between matter qubits across the network enables all-to-all logical connectivity via quantum gate teleportation (QGT). For a scalable DQC architecture, the QGT implementation must be deterministic and repeatable; until now, no demonstration has satisfied these requirements. In this thesis, we report the first experimental demonstration of distributed quantum computing across a quantum network of two photonically interconnected trapped-ion modules. Our experimental apparatus comprises two trapped-ion modules, separated by ∼ 2 m, each co-trapping one 43Ca+ ion and one 88Sr+ ion. The 43Ca+ ions provide a robust quantum memory for the modules, while the 88Sr+ ions provide an interface to the optical quantum network, enabling the remote entanglement of 88Sr+ ions in separate modules. Using local mixed-species operations, we demonstrate the enhanced functionality of the mixed-species trapped-ion quantum network by creating more complex remotely entangled states. These include remote 88Sr+- 43Ca+ and 43Ca+-43Ca+ entanglement, as well as 3- and 4-qubit mixed-species GHZ states. Additionally, we demonstrate the storage of remote entanglement in the 43Ca+ ions for up to 10 s. Utilising these techniques, we demonstrate the distribution of quantum computations across the mixed-species trapped-ion quantum network. Using heralded remote entanglement between the 88Sr+ ions, we deterministically teleport controlled Z gates between two 43Ca+ ions in separate modules, achieving a fidelity of 86 %. We then implement distributed iSWAP and SWAP circuits, compiled with 2 and 3 instances of QGT, respectively, demonstrating the ability to distribute arbitrary two-qubit operations. Finally, we execute Grover’s search algorithm – the first implementation of a distributed quantum algorithm comprising multiple non-local two-qubit gates – and measure a success rate of 71 %. These results represent a significant step towards realising a large-scale distributed quantum computer.
Quantum computing offers significant speedups, but the large number of physical qubits required for quantum error correction introduces engineering challenges for a monolithic architecture. One solution is to distribute the logical quantum computation across multiple small quantum computers, with non-local operations enabled via distributed Bell states. Previous investigations of distributed quantum error correction have largely focused on the surface code, which offers good error suppression but poor encoding rates, with each surface code instance only able to encode a single logical qubit. In this work, we argue that hyperbolic Floquet codes are particularly well-suited to distributed quantum error correction for two reasons. Firstly, their hyperbolic structure enables a high number of logical qubits to be stored efficiently. Secondly, the fact that all measurements are between pairs of qubits means that each measurement only requires a single Bell state. Under the circuit-level noise model, we demonstrate through simulations that distributed hyperbolic Floquet codes offer good performance with achievable local and non-local fidelities of approximately 99.97% and 99%, respectively. This shows that distributed quantum error correction is not only possible but also efficiently realisable.