Deploying quantum networks over existing network infrastructures requires the same engineering foundations that underpin classical communications: quantitative models of the channel's noise and of the impairments it imposes on the transmitted information. In this work, we build such a foundation on experimental measurements, grounding the quantum-network counterparts of the two cornerstone metrics of classical link characterization - namely, the SINR and the BER - on a 7.3 km deployed metropolitan-scale fiber-loop interconnecting two campuses of the University of Naples Federico II within the national QuantumInternet.it testbed. On the noise side, we adopt a photon-counting quantum analog of the SINR - in which dark counts constitute the intrinsic noise and the photons generated by classical traffic (through either spontaneous Raman scattering or inter-fiber crosstalk) constitute the interference - and we quantify each contribution directly on the deployed loop. On the bit-error side, we consider the main degrees-of-freedom available to encode a quantum state within an optical photon - namely, polarization, time, and frequency - and we quantify for each degree the channel-induced degradation and its drift over time. These results show that a quantum fiber link, like its classical counterpart, can be captured by a small set of measurable parameters, turning quantum networking over deployed fiber from a physics demonstration into an engineering design problem. Together, they provide the key ingredients of a quantum link budget for the Quantum Internet.
Comments
This work has been funded by the European Union under Horizon Europe ERC-CoG grant QNattyNet ("Quantum-Native Communication Networks: from Quantum Message to Quantum Functioning"), n.101169850. Details at https://qnattynet.quantuminternet.it
Deploying quantum networks over existing network infrastructures requires the same engineering foundations that underpin classical communications: quantitative models of the channel's noise and of the impairments it imposes on the transmitted information. In this work, we build such a foundation on experimental measurements, grounding the quantum-network counterparts of the two cornerstone metrics of classical link characterization - namely, the SINR and the BER - on a 7.3 km deployed metropolitan-scale fiber-loop interconnecting two campuses of the University of Naples Federico II within the national QuantumInternet.it testbed. On the noise side, we adopt a photon-counting quantum analog of the SINR - in which dark counts constitute the intrinsic noise and the photons generated by classical traffic (through either spontaneous Raman scattering or inter-fiber crosstalk) constitute the interference - and we quantify each contribution directly on the deployed loop. On the bit-error side, we consider the main degrees-of-freedom available to encode a quantum state within an optical photon - namely, polarization, time, and frequency - and we quantify for each degree the channel-induced degradation and its drift over time. These results show that a quantum fiber link, like its classical counterpart, can be captured by a small set of measurable parameters, turning quantum networking over deployed fiber from a physics demonstration into an engineering design problem. Together, they provide the key ingredients of a quantum link budget for the Quantum Internet.
The coexistence of quantum and classical signals in optical fiber infrastructures represents a major challenge for large-scale quantum networks, as noise sources such as Raman scattering can significantly impact entanglement distribution, and the quantum protocols based on it. In this work, we analyze Raman scattering in the C-band, used for entanglement distribution, generated by a classical the O-band signal. The main contribution of this study lays in investigating these effects in a real metropolitan-fiber network, moving beyond controlled laboratory experiments to deployed telecommunication environments. Measurements are performed over a 7 km metropolitan fiber link using commercial sources and narrowband lasers. The experimental results shows good agreement between the measurements taken under laboratory conditions, although, within the metropolitan-scale loop, localized spectral anomalies are observed in the deployed fibers. Therefore, our results show that, whenever a quantum signal propagates in the C-band alongside an O-band classical channel within the same fiber, careful selection of the operating frequency is required, as Raman scattering and other real-world noise sources can significantly affect the quality and stability of the quantum transmission. In particular, we identify spectral regions that are less affected by Raman noise, thereby providing practical guidelines for optimal quantum channel allocation. We demonstrate that Raman-induced noise constitutes a dominant contribution to the quantum signal-to-noise ratio (SNR) in realistic deployments, beyond background and detector noise. Overall, our findings offer practical insights for deploying quantum communication systems over existing fiber networks, supporting the development of robust and scalable quantum infrastructures.
Distributing quantum information between remote systems will necessitate the integration of emerging quantum components with existing communication infrastructure. This requires understanding the channel-induced degradations of the transmitted quantum signals, beyond the typical characterization methods for classical communication systems. Here we report on a comprehensive characterization of a Boston-Area Quantum Network (BARQNET) telecom fiber testbed, measuring the time-of-flight, polarization, and phase noise imparted on transmitted signals. We further design and demonstrate a compensation system that is both resilient to these noise sources and compatible with integration of emerging quantum memory components on the deployed link. These results have utility for future work on the BARQNET as well as other quantum network testbeds in development, enabling near-term quantum networking demonstrations and informing what areas of technology development will be most impactful in advancing future system capabilities.
The coexistence of quantum and classical signals in the same optical fiber is a critical challenge for the deployment of quantum networks. Indeed, selecting an optimal channel for quantum signal transmission is crucial to minimize noise arising from co-propagating classical signals. This work experimentally investigates spontaneous Raman scattering (SpRS), a major source of noise in signals transmitted along the same fiber. Unlike most previous studies relying on narrow-linewidth laboratory lasers or architectures based on spatial or temporal multiplexing of quantum and classical signals, we employ commercial SFP optical transceivers and standard single-core single-mode fiber for the transmission of quantum and classical signals in the same fiber, reflecting conditions typical of deployed urban fiber infrastructures. Building on these measurements, we derive a compact and predictive model that captures the Raman scattering profile, enabling accurate estimation of SpRS noise as a function of source power, wavelength, and fiber length. A key outcome of this work is that the proposed model is independent of the specific optical source used, demonstrating its generality and robustness. The model can therefore be used for the identification of optimal C-band channels for quantum signal allocation, namely those least affected by SpRS noise generated by co-propagating O-band classical traffic. These results pave the way for a parameter-robust description of Raman scattering applicable to diverse fiber-based systems.
Quantum networks exhibit enhanced performance compared to their classical counterparts, enabling secure communication and enhanced sensing protocols. Scalable quantum networks must transmit photons over distances ranging from kilometers to metropolitan scales while preserving entanglement. The objective of this thesis is to characterize the sources and switches of real-world deployed quantum networks, which require an intimate knowledge of nonlinear concepts and devices that drive these operating regimes. Importantly, quantum networks are deployed alongside existing classical communication infrastructure to ensure scalability and compatibility with established fiber-based systems. As a result, quantum and classical signals must coexist within the same telecommunication network. Because quantum infrastructure relies on optical fiber, these networks are susceptible to instabilities arising from fiber- induced effects. To fully realize a scalable quantum network, we investigated the quantum physical layer to optimize performance and identify limitations in our networking system. We characterized the performance of an entangled-photon source used to produce polarization-entangled photons. We then observe how well a high-speed, low-loss quantum switch preserves entanglement, demonstrating its utility for transmitting photons to different nodes in scalable quantum networks. We then analyze a 30 km deployed fiber located in the DC metropolitan area to examine how fiber-induced effects influence network performance. Quantum networks uniquely leverage quantum phenomena to enable fundamentally secure communication and distributed quantum computing beyond the capabilities of classical systems. To realize these advantages, careful characterization of the quantum physical layer and deployed fiber-based networks is essential, as it ensures the stability, reliability, and high-fidelity operation required for large-scale quantum network applications.
Time synchronization is a fundamental requirement in entanglement-based quantum networks, where the indistinguishability of photons in the time domain is essential for enabling Hong-Ou-Mandel interference and entanglement swapping. In addition to precise temporal alignment, it is equally crucial to ensure the stability of the reference clock over time, as even small fluctuations can degrade the overall performance of the network. In this work, we investigate the stability of clock synchronization for entanglement distribution based on entangled-photon sources operating in the telecommunication C-band. Temporal correlations between photon detection events are analyzed using time-tagged coincidence measurements, enabling the extraction of synchronization peaks and their long-term stability. Experimental results demonstrate that, once locked, the sources exhibit stable temporal correlations over an 8-hour acquisition period, with a maximum observed drift of approximately 120 ps, primarily associated with long fiber links. The width of the correlation peak remains consistent with detector jitter, indicating negligible additional system-induced temporal broadening. A central result of this work is the experimental synchronization between two entanglement-photon sources in a realistic metropolitan deployment, where entanglement distribution is performed over existing telecommunication infrastructure characterized by non-negligible losses and background noise. In this scenario, despite the presence of significant imperfections introduced by the metropolitan-scale fiber network, the observed correlations remain clearly detectable and are consistently well-approximated by Gaussian statistics. This confirms that the two sources can be reliably synchronized not only in controlled laboratory conditions but also under real-world operating constraints.
The development of quantum networks marks a transformative advance in communication technologies, enabling communication security unattainable through classical signals and the interconnection of quantum computers, sensors, and devices at various scales. Leveraging classical telecommunication infrastructure, such as optical fibers and associated devices, is pivotal for practical quantum network implementation. The Washington Metropolitan Quantum Network Research Consortium (DC-QNet) is developing a quantum network testbed in the Washington, DC area based on this infrastructure. However, adapting classical systems for quantum networks introduces significant challenges, including crosstalk between classical and quantum channels, stringent synchronization precision demands, polarization drift in optical fibers, and the limitations of classical optical devices. We present experimental demonstrations of these challenges and novel solutions, including a new crosstalk characterization technique. Results are derived from real-world DC-QNet infrastructure, showcasing the feasibility and progress of quantum network implementation.