Quantum networks exhibit enhanced performance compared to their classical counterparts, enabling secure communication and enhanced sensing protocols. Scalable quantum networks must transmit photons over distances ranging from kilometers to metropolitan scales while preserving entanglement. The objective of this thesis is to characterize the sources and switches of real-world deployed quantum networks, which require an intimate knowledge of nonlinear concepts and devices that drive these operating regimes. Importantly, quantum networks are deployed alongside existing classical communication infrastructure to ensure scalability and compatibility with established fiber-based systems. As a result, quantum and classical signals must coexist within the same telecommunication network. Because quantum infrastructure relies on optical fiber, these networks are susceptible to instabilities arising from fiber- induced effects. To fully realize a scalable quantum network, we investigated the quantum physical layer to optimize performance and identify limitations in our networking system. We characterized the performance of an entangled-photon source used to produce polarization-entangled photons. We then observe how well a high-speed, low-loss quantum switch preserves entanglement, demonstrating its utility for transmitting photons to different nodes in scalable quantum networks. We then analyze a 30 km deployed fiber located in the DC metropolitan area to examine how fiber-induced effects influence network performance. Quantum networks uniquely leverage quantum phenomena to enable fundamentally secure communication and distributed quantum computing beyond the capabilities of classical systems. To realize these advantages, careful characterization of the quantum physical layer and deployed fiber-based networks is essential, as it ensures the stability, reliability, and high-fidelity operation required for large-scale quantum network applications.
Quantum networks exhibit enhanced performance compared to their classical counterparts, enabling secure communication and enhanced sensing protocols. Scalable quantum networks must transmit photons over distances ranging from kilometers to metropolitan scales while preserving entanglement. The objective of this thesis is to characterize the sources and switches of real-world deployed quantum networks, which require an intimate knowledge of nonlinear concepts and devices that drive these operating regimes. Importantly, quantum networks are deployed alongside existing classical communication infrastructure to ensure scalability and compatibility with established fiber-based systems. As a result, quantum and classical signals must coexist within the same telecommunication network. Because quantum infrastructure relies on optical fiber, these networks are susceptible to instabilities arising from fiber- induced effects. To fully realize a scalable quantum network, we investigated the quantum physical layer to optimize performance and identify limitations in our networking system. We characterized the performance of an entangled-photon source used to produce polarization-entangled photons. We then observe how well a high-speed, low-loss quantum switch preserves entanglement, demonstrating its utility for transmitting photons to different nodes in scalable quantum networks. We then analyze a 30 km deployed fiber located in the DC metropolitan area to examine how fiber-induced effects influence network performance. Quantum networks uniquely leverage quantum phenomena to enable fundamentally secure communication and distributed quantum computing beyond the capabilities of classical systems. To realize these advantages, careful characterization of the quantum physical layer and deployed fiber-based networks is essential, as it ensures the stability, reliability, and high-fidelity operation required for large-scale quantum network applications.
Quantum networking enables the distribution of quantum information across distant nodes, unlocking capabilities such as secure communication, distributed quantum computing, enhanced metrology, and tests of fundamental physics. Photons serve as the natural carriers of quantum information over long distances due to their low loss in optical fibers and robustness to environmental decoherence. However, the practical realization of quantum networks remains limited by the lack of photon sources that are simultaneously compatible with diverse quantum systems, stable over long timescales, and suitable for deployment in real-world fiber infrastructure. This dissertation addresses these challenges through the co-development of photon-pair sources and a field-deployed quantum networking testbed. We present two complementary chip-scale sources of correlated photon pairs tailored for distinct bottlenecks in quantum networking. The first is a hybrid visible–telecom photon-pair source designed to address a fundamental spectral mismatch between quantum nodes and communication channels. While most quantum memories and processors operate at visible to near- nfrared wavelengths, optical fibers exhibit minimal loss in the telecommunications band. By integrating periodically poled nonlinear waveguides with photonic integrated circuits, we demonstrate a platform capable of directly generating visible–telecom photon pairs, enabling efficient interfacing between heterogeneous quantum systems and existing fiber networks. The second source is a fully packaged, broadband telecom photon-pair source based on silicon waveguide spirals, designed for stable, long-duration operation. This stability enables extended measurements necessary to overcome channel losses and environmental drifts in deployed fiber networks. These sources are evaluated within RoQNET (Rochester Quantum Network), a ∼20 km fiber link between the Rochester Institute of Technology and the University of Rochester. Using this platform, we demonstrate the transmission and on-chip modulation of heralded telecom single photons, verify their nonclassical statistics, and characterize long-term channel behavior. Additionally, we explore programmable time-bin entanglement distribution using spectral waveshapers, providing a flexible approach to quantum communication. Together, this work establishes a co-designed source–network framework for scalable, heterogeneous quantum networking.
The coexistence of quantum and classical signals in optical fiber infrastructures represents a major challenge for large-scale quantum networks, as noise sources such as Raman scattering can significantly impact entanglement distribution, and the quantum protocols based on it. In this work, we analyze Raman scattering in the C-band, used for entanglement distribution, generated by a classical the O-band signal. The main contribution of this study lays in investigating these effects in a real metropolitan-fiber network, moving beyond controlled laboratory experiments to deployed telecommunication environments. Measurements are performed over a 7 km metropolitan fiber link using commercial sources and narrowband lasers. The experimental results shows good agreement between the measurements taken under laboratory conditions, although, within the metropolitan-scale loop, localized spectral anomalies are observed in the deployed fibers. Therefore, our results show that, whenever a quantum signal propagates in the C-band alongside an O-band classical channel within the same fiber, careful selection of the operating frequency is required, as Raman scattering and other real-world noise sources can significantly affect the quality and stability of the quantum transmission. In particular, we identify spectral regions that are less affected by Raman noise, thereby providing practical guidelines for optimal quantum channel allocation. We demonstrate that Raman-induced noise constitutes a dominant contribution to the quantum signal-to-noise ratio (SNR) in realistic deployments, beyond background and detector noise. Overall, our findings offer practical insights for deploying quantum communication systems over existing fiber networks, supporting the development of robust and scalable quantum infrastructures.
The development of quantum networks marks a transformative advance in communication technologies, enabling communication security unattainable through classical signals and the interconnection of quantum computers, sensors, and devices at various scales. Leveraging classical telecommunication infrastructure, such as optical fibers and associated devices, is pivotal for practical quantum network implementation. The Washington Metropolitan Quantum Network Research Consortium (DC-QNet) is developing a quantum network testbed in the Washington, DC area based on this infrastructure. However, adapting classical systems for quantum networks introduces significant challenges, including crosstalk between classical and quantum channels, stringent synchronization precision demands, polarization drift in optical fibers, and the limitations of classical optical devices. We present experimental demonstrations of these challenges and novel solutions, including a new crosstalk characterization technique. Results are derived from real-world DC-QNet infrastructure, showcasing the feasibility and progress of quantum network implementation.
Quantum networks provide a versatile infrastructure for communication, computing, and sensing with quantum information. Novel sources and detectors for transmitting and receiving quantum states are critical elements in the development and eventual deployment of robust quantum networks. Alongside performance, the compatibility of quantum network devices with modern networking infrastructure is an important requirement for deployment. We present results on the integration of quantum communication using superdense coding transmitted over optical fiber links into network environments. Our approach takes advantage of a novel complete Bell-state measurement setup that relies on hyper-entanglement in the temporal and polarization degrees of freedom for a two-photon state emitted from a quantum light source. Using linear optics and common single-photon detectors, we record a single-qubit channel capacity of 1.665±0.018. We then demonstrate a full experimental implementation of hybrid, quantum-classical communication protocol for image transfer applications. Our devices integrate with existing fiber optical network and software-defined transmitters and receivers as part of a modular design to provide an extensible quantum communication system that can adapt to future quantum technology goals.
Quantum networks provide a versatile infrastructure for communication, computing, and sensing with quantum information. Novel sources and detectors for transmitting and receiving quantum states are critical elements in the development and eventual deployment of robust quantum networks. Alongside performance, the compatibility of quantum network devices with modern networking infrastructure is an important requirement for deployment. We present results on the integration of quantum communication using superdense coding transmitted over optical fiber links into network environments. Our approach takes advantage of a novel complete Bell-state measurement setup that relies on hyper-entanglement in the temporal and polarization degrees of freedom for a two-photon state emitted from a quantum light source. Using linear optics and common single-photon detectors, we record a single-qubit channel capacity of 1.665±0.018. We then demonstrate a full experimental implementation of hybrid, quantum-classical communication protocol for image transfer applications. Our devices integrate with existing fiber optical network and software-defined transmitters and receivers as part of a modular design to provide an extensible quantum communication system that can adapt to future quantum technology goals.
The distribution of high-fidelity high-rate entanglement over telecommunication infrastructure is one of the main paths toward large-scale quantum networks, enabling applications such as quantum encryption and network protection, blind quantum computing, distributed quantum computing, and distributed quantum sensing. However, the fragile nature of entangled photons operating in real-world fiber infrastructure has historically limited continuous operation of such networks. Here, we present a fully automated system capable of distributing polarization-entangled photons over a 34-km deployed fiber in New York City, achieving high rates of nearly 5 × 10 5 pairs/s. Separately, we demonstrate a high fidelity of approximately 99 % for rates up to 2 × 10 4 pairs/s. Lastly, we achieve 15 days of continuous distribution, with a network up-time of 99.84 % . Our work paves the way for practical deployment of always-on entanglement-based networks with rates and fidelity adequate for many current and future use cases. Published by the American Physical Society 2024