Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.01744

Reliable Sample-Level Quantum Error Mitigation via Dominance-Aware Clustering

Mohsen Ghodrati, Kausthubh Chandramouli, Dror Baron

quant-phcs.ITSubmitted Sep 1, 2026• Announced Sep 3, 2026• 0 citations
arXivHTMLPDF

Abstract

Many quantum algorithms for classically difficult optimization tasks must return high-quality bitstrings from finitely many circuit executions, whereas most quantum error-mitigation methods target expectation values. We study sample-level recovery when measured probability mass is distributed around multiple latent bitstrings, called centers. Each component of the measured probability mass is called a source and we assume that each center is associated with one source. We identify dominance-at every coordinate, more than half of a retained region's probability mass comes from one source and agrees with its center-as a sufficient condition under which majority voting recovers that center with exponentially decreasing error probability. We show that nearest-center assignment, as used in clustering algorithms such as the $k$-modes algorithm, can fail to produce dominated regions even when the true centers are known. This failure motivates responsibility thresholding and a local dominance screen, whose combination we call dominance-aware (DA) refinement. Synthetic and simulated MaxCut-QAOA experiments show that DA refinement favors precision, while $k$-modes with DA refinement improves overall center recovery. All procedures are classical post-processing and require no additional quantum-circuit executions.

Related papers

Qubit-Wise Majority Vote: Maximum Likelihood Quantum Error Mitigation for Algorithms with a Single Correct Output

Dror Baron, Hrushikesh Pramod Patil, Huiyang Zhou

Quantum error mitigation is an important technique to reduce the impact of noise in quantum computers. With more and more qubits being supported on quantum computers, there are two emerging fundamental challenges. First, the number of shots required for quantum algorithms with large numbers of qubits needs to increase in order to obtain a meaningful distribution or expected value of an observable. Second, although steady progress has been made in improving the fidelity of each qubit, circuits with a large number of qubits are likely to produce erroneous results. This low-shot, high-noise regime calls for highly scalable error mitigation techniques. In this paper, we propose a simple and effective mitigation scheme, qubit-wise majority vote, for quantum algorithms with a single correct output. We show that our scheme produces the maximum likelihood (ML) estimate under certain assumptions and bound the number of shots required. Our experimental results on real quantum devices confirm that our proposed approach requires fewer shots than existing ones, and can sometimes recover the correct answers even when they are not observed from the measurement results.

arXiv:2402.11830•IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 15, 2024•2 citations

Quantum Bayesian Error Mitigation Employing Poisson Modelling over the Hamming Spectrum for Quantum Error Mitigation

Stein, Samuel, Nathan Wiebe, Yufei Ding +2 more

The field of quantum computing has experienced a rapid expansion in recent years, with ongoing exploration of new technologies, a decrease in error rates, and a growth in the number of qubits available in quantum processors. However, near-term quantum algorithms are still unable to be induced without compounding consequential levels of noise, leading to non-trivial erroneous results. Quantum Error Correction and Mitigation are rapidly advancing areas of research in the quantum computing landscape, with a goal of reducing errors. IBM has recently emphasized that Quantum Error Mitigation is the key to unlocking the full potential of quantum computing. A recent work, namely HAMMER, demonstrated the existence of a latent structure regarding post-circuit induction errors when mapping to the Hamming spectrum. However, they assumed that errors occur solely in local clusters, whereas we observe that at higher average Hamming distances this structure falls away. Our study demonstrates that the correlated structure is not just limited to local patterns, but it also encompasses certain non-local clustering patterns that can be accurately characterized through a Poisson distribution model. This model takes into account the input circuit, the current state of the device, including calibration statistics, and the qubit topology. Using this quantum error characterizing model, we developed an iterative algorithm over the generated Bayesian network state-graph for post-induction error mitigation. Our Q-Beep approach delivers state-of-the-art results, thanks to its problem-aware modeling of the error distribution's underlying structure and the implementation of an Bayesian network state-graph. This has resulted in an increase of up to 234.6% in circuit execution accuracy on BV circuits and an average improvement of 71.0% in the quality of QAOA solutions when tested on 16 IBMQ quantum processors.

arXiv:2207.07237•Jul 14, 2022•1 citation

Exponential measurement error mitigation in quantum sampling

He-Liang Huang

Abstract Measurement errors limit the fidelity of sampling-based quantum tasks, yet extending error mitigation to sampling remains challenging. Here, we introduce a simple and scalable repetition-based scheme that mitigates measurement errors directly at the sampling level. By encoding each data qubit into multiple physical qubits prior to readout and applying majority-vote decoding, physical errors are converted into a higher-order process, enabling exponential suppression that persists despite realistic gate imperfections during encoding. Using experimental noise profiles from leading superconducting platforms, we demonstrate that a modest linear qubit overhead suppresses measurement errors by several orders of magnitude, significantly boosting fidelities for typical sampling tasks, such as measurement-based quantum computation and random circuit sampling. These results establish a practical, hardware-compatible, and scalable approach for improving the reliability of near-term quantum sampling experiments.

npj Unconventional Computing•Aug 31, 2026•0 citations

Resource-Optimal Importance Sampling for Randomized Quantum Algorithms

Davide Cugini, Touheed Anwar Atif, Yigit Subasi

Randomized protocols are procedures that incorporate probabilistic choices during their execution and they play a central role in quantum algorithms, spanning Hamiltonian simulation, noise mitigation, and measurement tasks. In practical implementations, the dominant cost of such protocols typically arises from circuit execution and measurement, and depends on hardware-specific resources such as gate counts, circuit depth, runtime, or dissipated energy. We introduce a general framework for applying classical importance sampling to randomized quantum protocols. Given a cost function for running quantum circuits, the proposed approach minimizes a net-cost figure of merit that jointly captures the computational expense per circuit and the estimator variance. We further extend the framework to scenarios where the quantum computation is subject to errors arising either from algorithmic approximations or from physical noise, proving that importance sampling preserves estimator bias despite altering the sampling distribution, and to settings with error-detection schemes, where we characterize the resulting changes in the optimal sampling strategy and achievable net-cost reduction. Representative applications include the Qdrift protocol, dephasing channels, mixed-states simulation, composite observables estimation, classical shadows, and probabilistic error cancellation. Overall, our results establish a principled approach for reducing the computational resources required by randomized quantum protocols through classical sampling optimization.

quant-pharXiv:2603.13495•Mar 17, 2026•0 citations

Compilation-informed probabilistic logical-error cancellation

Giancarlo Camilo, Thiago O. Maciel, Allan Tosta +4 more

The potential of quantum computers to outperform classical ones in practically useful tasks remains challenging in the near term due to scaling limitations and high error rates of current quantum hardware. While quantum error correction (QEC) offers a clear path towards fault tolerance, overcoming the scalability issues will take time. Early applications will likely rely on QEC combined with quantum error mitigation (QEM). We introduce a QEM scheme against both compilation errors and logical-gate noise that is circuit-, QEC code-, and compiler-agnostic. The scheme builds on quasi-probability methods and uses information about the circuit's gates' compilations to attain an unbiased estimation of noiseless expectation values incurring a constant sample-complexity overhead. Moreover, it features maximal circuit size and code distance both independent of the target precision, in contrast to strategies based on QEC alone. We formulate the mitigation procedure as a linear program, demonstrate its efficacy through numerical simulations, and illustrate it for estimating the Jones polynomials of knots. Our method significantly reduces quantum resource requirements for high-precision estimations, offering a practical route towards fault-tolerant quantum computation with precision-independent overheads for fixed circuit size and code distance.

arXiv:2508.20174•Aug 27, 2025•0 citations

Near-Perfect Error Recovery on NISQ Hardware via Structure-Aware Diffusion Reversal

Vinko Barac

We present a classical post-processing method for quantum error mitigation that achieves 87.6-100% recovery of lost quantum information on real NISQ hardware with zero calibration overhead. The method exploits the mathematical equivalence between quantum decoherence and classical diffusion to apply Richardson-Lucy deconvolution to quantum measurement probability distributions. Tested on IBM Quantum Torino hardware across six circuit types, the method achieves 97.8% average fidelity recovery while requiring no ancilla qubits, no additional circuit executions, and no prior hardware characterization.

•Feb 21, 2026•0 citations
Many quantum algorithms for classically difficult optimization tasks must return high-quality bitstrings from finitely many circuit executions, whereas most quantum error-mitigation methods target expectation values. We study sample-level recovery when measured probability mass is distributed around multiple latent bitstrings, called centers. Each component of the measured probability mass is called a source and we assume that each center is associated with one source. We identify dominance-at every coordinate, more than half of a retained region's probability mass comes from one source and agrees with its center-as a sufficient condition under which majority voting recovers that center with exponentially decreasing error probability. We show that nearest-center assignment, as used in clustering algorithms such as the kkk-modes algorithm, can fail to produce dominated regions even when the true centers are known. This failure motivates responsibility thresholding and a local dominance screen, whose combination we call dominance-aware (DA) refinement. Synthetic and simulated MaxCut-QAOA experiments show that DA refinement favors precision, while kkk-modes with DA refinement improves overall center recovery. All procedures are classical post-processing and require no additional quantum-circuit executions.
Quantum error mitigation is an important technique to reduce the impact of noise in quantum computers. With more and more qubits being supported on quantum computers, there are two emerging fundamental challenges. First, the number of shots required for quantum algorithms with large numbers of qubits needs to increase in order to obtain a meaningful distribution or expected value of an observable. Second, although steady progress has been made in improving the fidelity of each qubit, circuits with a large number of qubits are likely to produce erroneous results. This low-shot, high-noise regime calls for highly scalable error mitigation techniques. In this paper, we propose a simple and effective mitigation scheme, qubit-wise majority vote, for quantum algorithms with a single correct output. We show that our scheme produces the maximum likelihood (ML) estimate under certain assumptions and bound the number of shots required. Our experimental results on real quantum devices confirm that our proposed approach requires fewer shots than existing ones, and can sometimes recover the correct answers even when they are not observed from the measurement results.
The field of quantum computing has experienced a rapid expansion in recent years, with ongoing exploration of new technologies, a decrease in error rates, and a growth in the number of qubits available in quantum processors. However, near-term quantum algorithms are still unable to be induced without compounding consequential levels of noise, leading to non-trivial erroneous results. Quantum Error Correction and Mitigation are rapidly advancing areas of research in the quantum computing landscape, with a goal of reducing errors. IBM has recently emphasized that Quantum Error Mitigation is the key to unlocking the full potential of quantum computing. A recent work, namely HAMMER, demonstrated the existence of a latent structure regarding post-circuit induction errors when mapping to the Hamming spectrum. However, they assumed that errors occur solely in local clusters, whereas we observe that at higher average Hamming distances this structure falls away. Our study demonstrates that the correlated structure is not just limited to local patterns, but it also encompasses certain non-local clustering patterns that can be accurately characterized through a Poisson distribution model. This model takes into account the input circuit, the current state of the device, including calibration statistics, and the qubit topology. Using this quantum error characterizing model, we developed an iterative algorithm over the generated Bayesian network state-graph for post-induction error mitigation. Our Q-Beep approach delivers state-of-the-art results, thanks to its problem-aware modeling of the error distribution's underlying structure and the implementation of an Bayesian network state-graph. This has resulted in an increase of up to 234.6% in circuit execution accuracy on BV circuits and an average improvement of 71.0% in the quality of QAOA solutions when tested on 16 IBMQ quantum processors.
Abstract Measurement errors limit the fidelity of sampling-based quantum tasks, yet extending error mitigation to sampling remains challenging. Here, we introduce a simple and scalable repetition-based scheme that mitigates measurement errors directly at the sampling level. By encoding each data qubit into multiple physical qubits prior to readout and applying majority-vote decoding, physical errors are converted into a higher-order process, enabling exponential suppression that persists despite realistic gate imperfections during encoding. Using experimental noise profiles from leading superconducting platforms, we demonstrate that a modest linear qubit overhead suppresses measurement errors by several orders of magnitude, significantly boosting fidelities for typical sampling tasks, such as measurement-based quantum computation and random circuit sampling. These results establish a practical, hardware-compatible, and scalable approach for improving the reliability of near-term quantum sampling experiments.
Randomized protocols are procedures that incorporate probabilistic choices during their execution and they play a central role in quantum algorithms, spanning Hamiltonian simulation, noise mitigation, and measurement tasks. In practical implementations, the dominant cost of such protocols typically arises from circuit execution and measurement, and depends on hardware-specific resources such as gate counts, circuit depth, runtime, or dissipated energy. We introduce a general framework for applying classical importance sampling to randomized quantum protocols. Given a cost function for running quantum circuits, the proposed approach minimizes a net-cost figure of merit that jointly captures the computational expense per circuit and the estimator variance. We further extend the framework to scenarios where the quantum computation is subject to errors arising either from algorithmic approximations or from physical noise, proving that importance sampling preserves estimator bias despite altering the sampling distribution, and to settings with error-detection schemes, where we characterize the resulting changes in the optimal sampling strategy and achievable net-cost reduction. Representative applications include the Qdrift protocol, dephasing channels, mixed-states simulation, composite observables estimation, classical shadows, and probabilistic error cancellation. Overall, our results establish a principled approach for reducing the computational resources required by randomized quantum protocols through classical sampling optimization.
The potential of quantum computers to outperform classical ones in practically useful tasks remains challenging in the near term due to scaling limitations and high error rates of current quantum hardware. While quantum error correction (QEC) offers a clear path towards fault tolerance, overcoming the scalability issues will take time. Early applications will likely rely on QEC combined with quantum error mitigation (QEM). We introduce a QEM scheme against both compilation errors and logical-gate noise that is circuit-, QEC code-, and compiler-agnostic. The scheme builds on quasi-probability methods and uses information about the circuit's gates' compilations to attain an unbiased estimation of noiseless expectation values incurring a constant sample-complexity overhead. Moreover, it features maximal circuit size and code distance both independent of the target precision, in contrast to strategies based on QEC alone. We formulate the mitigation procedure as a linear program, demonstrate its efficacy through numerical simulations, and illustrate it for estimating the Jones polynomials of knots. Our method significantly reduces quantum resource requirements for high-precision estimations, offering a practical route towards fault-tolerant quantum computation with precision-independent overheads for fixed circuit size and code distance.
We present a classical post-processing method for quantum error mitigation that achieves 87.6-100% recovery of lost quantum information on real NISQ hardware with zero calibration overhead. The method exploits the mathematical equivalence between quantum decoherence and classical diffusion to apply Richardson-Lucy deconvolution to quantum measurement probability distributions. Tested on IBM Quantum Torino hardware across six circuit types, the method achieves 97.8% average fidelity recovery while requiring no ancilla qubits, no additional circuit executions, and no prior hardware characterization.