Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2608.31040

Fast Fault-Tolerant Decoders for Hypergraph Product and Lifted-Product Codes

Asit Kumar Pradhan, Nithin Raveendran, David Declercq, Bane Vasić

cs.ITquant-phSubmitted Aug 31, 2026• Announced Sep 1, 2026• 0 citations
v1 · Aug 31, 2026v2 · Oct 27, 2026
arXivHTMLPDF

Abstract

We design low-complexity, fault-tolerant decoders for quantum low-density parity-check (QLDPC) codes with the goal of reducing decoding latency. We target two major bottlenecks of decoding under the \emph{circuit-level} noise model: (i) post-processing via order-statistics decoding (OSD), and (ii) the large number of auxiliary variable nodes commonly introduced to represent CNOT-induced correlations during syndrome extraction. Our key observation is that propagating CNOT faults (\emph{hook errors}) create \emph{stabilizer-induced} trapping sets (TSs) that are intrinsic to hypergraph-product (HGP) and lifted-product (LP) constructions. Therefore, instead of modeling each such fault with an explicit correlation node and relying on OSD to clean up the resulting failures, we design message-passing decoders that resolve the corresponding \emph{stabilizer-induced} TSs directly. We obtain these decoders by deriving QLDPC decoders from decoders for the parent classical LDPC codes and using them collectively to correct broad families of \emph{stabilizer-induced} TSs. For CNOT faults that manifest primarily as syndrome errors, we show that their effect is equivalent to a data error together with syndrome-bit measurement errors. Consequently, given repeated measurements and a decoding graph that already includes nodes representing syndrome-bit errors, no distinct variable node is needed for each CNOT fault. Using a \emph{phenomenological} Tanner graph with nodes representing only data errors and syndrome-bit errors, simulations on the LP codes show a reduction in, or comparable, logical error rates relative to BP+OSD, at substantially lower decoding complexity.

Related papers

Linear Time Iterative Decoders for Hypergraph-Product and Lifted-Product Codes

Asit Kumar Pradhan, Nithin Raveendran, Narayanan Rengaswamy +1 more

Quantum low-density parity-check (QLDPC) codes with asymptotically non-zero rates are prominent candidates for achieving fault-tolerant quantum computation, primarily due to the low operational depth of their syndrome-measurement circuits. Numerous studies advocate the necessity of fast decoders to fully harness the capabilities of QLDPC codes, thus driving the focus towards designing low-complexity iterative decoders. However, empirical investigations indicate that such iterative decoders are susceptible to having a high error floor when decoding QLDPC codes. The main objective of this paper is to analyze the decoding failures of thehypergraph-product(HGP) andlifted-product(LP) codes and to design decoders that mitigate these failures, thus achieving a reduced error floor. The suboptimal performance of these codes can predominantly be ascribed to two structural phenomena: (1) stabilizer-induced trapping sets (TS), which correspond to stabilizer-induced subgraphs in the Tanner graphs, and (2) classical trapping sets (TS), which originate from the classical codes used in the construction of HGP and LP codes. The dynamics of stabilizer-induced TSs are examined, and a straightforward modification of iterative decoders is proposed to circumvent these TSs. Moreover, this work proposes a systematic methodology for designing decoders that can circumvent the classical TSs in both HGP and LP codes by deriving them from decoders capable of avoiding the TSs in the parent classical LDPC codes. When decoders that can avoid stabilizer-induced TSs are run in parallel with those that can mitigate the effect of classical TSs, the logical error rate improves significantly in the error-floor region.

arXiv:2504.01728•IEEE Transactions on Information Theory•Apr 27, 2026•0 citations

Decoding Quantum LDPC Codes using Collaborative Check Node Removal

Mainak Bhattacharyya, Ankur Raina

Fault tolerance in quantum protocols requires contributions from error-correcting codes and their suitable decoders. Quantum Low-Density Parity Check (QLDPC) codes are one of the most explored quantum codes that have good coding rate and efficient decoders. Iterative message passing-based decoders, although fast, fail to produce suitable success rates due to the colossal degeneracy and short cycles intrinsic to these codes. In this work we present a strategy to improve the performance of the Belief Propagation (BP) decoding, specifically the min-sum algorithm. We propose a collaborative decoding framework that integrates message passing with stabilizer check node removals. We further introduce the concept of ``qubit separation" and show that the improved decoding performance is directly related to the generation of highly separated trapped data qubits. To guide a more selective removal of check nodes that constrain the separation of the trapped data qubits, we introduce information measurements (IMs) for the data qubits and their adjacent stabilizer checks. We evaluate the performance of the proposed collaborative decoder on Generalized Hypergraph Product (GHP) codes and demonstrate that appropriate decoder configurations mitigate trapping sets in min-sum decoding without significant overhead.

arXiv:2501.08036•Jan 14, 2025•0 citations

HyperNQ: A Hypergraph Neural Network Decoder for Quantum LDPC Codes

Ameya S. Bhave, Navnil Choudhury, Kanad Basu

Quantum computing requires effective error correction strategies to mitigate noise and decoherence. Quantum Low-Density Parity-Check (QLDPC) codes have emerged as a promising solution for scalable Quantum Error Correction (QEC) applications by supporting constant-rate encoding and a sparse parity-check structure. However, decoding QLDPC codes via traditional approaches such as Belief Propagation (BP) suffers from poor convergence in the presence of short cycles. Machine learning techniques like Graph Neural Networks (GNNs) utilize learned message passing over their node features; however, they are restricted to pairwise interactions on Tanner graphs, which limits their ability to capture higher-order correlations. In this work, we propose HyperNQ, the first Hypergraph Neural Network (HGNN)- based QLDPC decoder that captures higher-order stabilizer constraints by utilizing hyperedges-thus enabling highly expressive and compact decoding. We use a two-stage message passing scheme and evaluate the decoder over the pseudo-threshold region. Below the pseudo-threshold mark, HyperNQ improves the Logical Error Rate (LER) up to 84% over BP and 50% over GNN-based strategies, demonstrating enhanced performance over the existing state-of-the-art decoders.

cs.LGCross-listedarXiv:2511.01741•International Conference on Communications•Nov 4, 2025•0 citations

Learning to Decode Trapping Sets in QLDPC Codes

Asit Kumar Pradhan, Nithin Raveendran, Narayanan Rengaswamy +2 more

Quantum low-density parity-check (QLDPC) codes with asymptotically nonzero rates are promising candidates for fault-tolerant quantum computation. Belief propagation (BP) based iterative decoding algorithms, a primary choice for classical LDPC codes, perform poorly for QLDPC codes due to stabilizer-induced trapping sets, resulting in a high error floor. Several decoding algorithms, like post-processing decoders, normalized BP decoders, and neural decoders, have been proposed to increase the performance in the error-floor region. However, this improvement comes at the expense of an increase in the execution time of the decoder. This paper proposes a general framework for error correction for a class of QLDPC codes called lifted-product codes using recurrent neural networks (RNNs). The RNN is employed to learn message-passing rules that can decode quantum-trapping sets. Then the standard message-passing rules are used with the learned rules to improve the error floor. While training the RNN, the quasi-cyclic property of the lifted product codes is exploited to reduce the size of the training set and the number of parameters in the network. This reduction in the number of parameters makes these decoders amenable to hardware implementation. Simulation results show that the proposed decoder performs better than the existing decoders in the literature.

International Symposium on Turbo Codes and Iterative Information Processing•Sep 4, 2023•4 citations

Untangling QLDPC Codes with Biased Noise Ancilla

Runjiang Bi, Kathleen Chang, Shruti Puri

Remarkable technical progress has made high-rate, high-distance, quantum low-density parity-check codes (QLDPC) promising candidates for scalable quantum computing. However, it is hard to design low-depth syndrome extraction circuits that do not spread errors from ancilla qubits to multiple data qubits, also known as hook errors, for general QLDPC codes. Additionally, widely used decoders for these codes based on belief propagation are impaired due to short loops in the Tanner graph. Here, we investigate a hardware-aware approach to avoid these hooks and loops using biased noise ancillas. Using examples of bicycle bivariate codes and a cyclic hypergraph product code, which have been widely considered for practical application, we show that the effective fault-distance of the conventional syndrome extraction circuit can be significantly higher and the number of short loops can be significantly lower when the ancillas are subject to phase-flip errors only, compared to when they are also subject to bit-flip errors. This can result in almost an order of magnitude improvement in the logical error rate at circuit noise of $2\times 10^{-3}$ and when bit-flip errors in the ancilla are 50 times less likely than phase-flip errors. Our work demonstrates a significant and practical quantum error correction advantage with biased noise qubits in which full-bias cannot be maintained.

quant-pharXiv:2606.30592•Jun 30, 2026•0 citations

Improved Noisy Syndrome Decoding of Quantum LDPC Codes with Sliding Window

Shilin Huang, Shruti Puri

Quantum error correction (QEC) with single-shot decoding enables reduction of errors after every single round of noisy stabilizer measurement, easing the time-overhead requirements for fault tolerance. Notably, several classes of quantum low-density-parity-check (qLDPC) codes are known which facilitate single-shot decoding, potentially giving them an additional overhead advantage. However, the perceived advantage of single-shot decoding is limited because it can significantly degrade the effective code distance. This degradation may be compensated for by using a much larger code size to achieve the desired target logical error rate, at the cost of increasing the amount of syndrome information to be processed, as well as, increasing complexity of logical operations. Alternatively, in this work we study sliding-window decoding, which corrects errors from previous syndrome measurement rounds while leaving the most recent errors for future correction. We observe that sliding-window decoding significantly improves the logical memory lifetime and hence the effective distance compared to single-shot decoding on hypergraph-product codes and lifted-product codes. Remarkably, we find that this improvement may not cost a larger decoding complexity. Thus, the sliding-window strategy can be more desirable for fast and accurate decoding for fault-tolerant quantum computing with qLDPC codes.

arXiv:2311.03307•Nov 6, 2023•0 citations
We design low-complexity, fault-tolerant decoders for quantum low-density parity-check (QLDPC) codes with the goal of reducing decoding latency. We target two major bottlenecks of decoding under the \emph{circuit-level} noise model: (i) post-processing via order-statistics decoding (OSD), and (ii) the large number of auxiliary variable nodes commonly introduced to represent CNOT-induced correlations during syndrome extraction. Our key observation is that propagating CNOT faults (\emph{hook errors}) create \emph{stabilizer-induced} trapping sets (TSs) that are intrinsic to hypergraph-product (HGP) and lifted-product (LP) constructions. Therefore, instead of modeling each such fault with an explicit correlation node and relying on OSD to clean up the resulting failures, we design message-passing decoders that resolve the corresponding \emph{stabilizer-induced} TSs directly. We obtain these decoders by deriving QLDPC decoders from decoders for the parent classical LDPC codes and using them collectively to correct broad families of \emph{stabilizer-induced} TSs. For CNOT faults that manifest primarily as syndrome errors, we show that their effect is equivalent to a data error together with syndrome-bit measurement errors. Consequently, given repeated measurements and a decoding graph that already includes nodes representing syndrome-bit errors, no distinct variable node is needed for each CNOT fault. Using a \emph{phenomenological} Tanner graph with nodes representing only data errors and syndrome-bit errors, simulations on the LP codes show a reduction in, or comparable, logical error rates relative to BP+OSD, at substantially lower decoding complexity.
Quantum low-density parity-check (QLDPC) codes with asymptotically non-zero rates are prominent candidates for achieving fault-tolerant quantum computation, primarily due to the low operational depth of their syndrome-measurement circuits. Numerous studies advocate the necessity of fast decoders to fully harness the capabilities of QLDPC codes, thus driving the focus towards designing low-complexity iterative decoders. However, empirical investigations indicate that such iterative decoders are susceptible to having a high error floor when decoding QLDPC codes. The main objective of this paper is to analyze the decoding failures of thehypergraph-product(HGP) andlifted-product(LP) codes and to design decoders that mitigate these failures, thus achieving a reduced error floor. The suboptimal performance of these codes can predominantly be ascribed to two structural phenomena: (1) stabilizer-induced trapping sets (TS), which correspond to stabilizer-induced subgraphs in the Tanner graphs, and (2) classical trapping sets (TS), which originate from the classical codes used in the construction of HGP and LP codes. The dynamics of stabilizer-induced TSs are examined, and a straightforward modification of iterative decoders is proposed to circumvent these TSs. Moreover, this work proposes a systematic methodology for designing decoders that can circumvent the classical TSs in both HGP and LP codes by deriving them from decoders capable of avoiding the TSs in the parent classical LDPC codes. When decoders that can avoid stabilizer-induced TSs are run in parallel with those that can mitigate the effect of classical TSs, the logical error rate improves significantly in the error-floor region.
Fault tolerance in quantum protocols requires contributions from error-correcting codes and their suitable decoders. Quantum Low-Density Parity Check (QLDPC) codes are one of the most explored quantum codes that have good coding rate and efficient decoders. Iterative message passing-based decoders, although fast, fail to produce suitable success rates due to the colossal degeneracy and short cycles intrinsic to these codes. In this work we present a strategy to improve the performance of the Belief Propagation (BP) decoding, specifically the min-sum algorithm. We propose a collaborative decoding framework that integrates message passing with stabilizer check node removals. We further introduce the concept of ``qubit separation" and show that the improved decoding performance is directly related to the generation of highly separated trapped data qubits. To guide a more selective removal of check nodes that constrain the separation of the trapped data qubits, we introduce information measurements (IMs) for the data qubits and their adjacent stabilizer checks. We evaluate the performance of the proposed collaborative decoder on Generalized Hypergraph Product (GHP) codes and demonstrate that appropriate decoder configurations mitigate trapping sets in min-sum decoding without significant overhead.
Quantum computing requires effective error correction strategies to mitigate noise and decoherence. Quantum Low-Density Parity-Check (QLDPC) codes have emerged as a promising solution for scalable Quantum Error Correction (QEC) applications by supporting constant-rate encoding and a sparse parity-check structure. However, decoding QLDPC codes via traditional approaches such as Belief Propagation (BP) suffers from poor convergence in the presence of short cycles. Machine learning techniques like Graph Neural Networks (GNNs) utilize learned message passing over their node features; however, they are restricted to pairwise interactions on Tanner graphs, which limits their ability to capture higher-order correlations. In this work, we propose HyperNQ, the first Hypergraph Neural Network (HGNN)- based QLDPC decoder that captures higher-order stabilizer constraints by utilizing hyperedges-thus enabling highly expressive and compact decoding. We use a two-stage message passing scheme and evaluate the decoder over the pseudo-threshold region. Below the pseudo-threshold mark, HyperNQ improves the Logical Error Rate (LER) up to 84% over BP and 50% over GNN-based strategies, demonstrating enhanced performance over the existing state-of-the-art decoders.
Quantum low-density parity-check (QLDPC) codes with asymptotically nonzero rates are promising candidates for fault-tolerant quantum computation. Belief propagation (BP) based iterative decoding algorithms, a primary choice for classical LDPC codes, perform poorly for QLDPC codes due to stabilizer-induced trapping sets, resulting in a high error floor. Several decoding algorithms, like post-processing decoders, normalized BP decoders, and neural decoders, have been proposed to increase the performance in the error-floor region. However, this improvement comes at the expense of an increase in the execution time of the decoder. This paper proposes a general framework for error correction for a class of QLDPC codes called lifted-product codes using recurrent neural networks (RNNs). The RNN is employed to learn message-passing rules that can decode quantum-trapping sets. Then the standard message-passing rules are used with the learned rules to improve the error floor. While training the RNN, the quasi-cyclic property of the lifted product codes is exploited to reduce the size of the training set and the number of parameters in the network. This reduction in the number of parameters makes these decoders amenable to hardware implementation. Simulation results show that the proposed decoder performs better than the existing decoders in the literature.
Remarkable technical progress has made high-rate, high-distance, quantum low-density parity-check codes (QLDPC) promising candidates for scalable quantum computing. However, it is hard to design low-depth syndrome extraction circuits that do not spread errors from ancilla qubits to multiple data qubits, also known as hook errors, for general QLDPC codes. Additionally, widely used decoders for these codes based on belief propagation are impaired due to short loops in the Tanner graph. Here, we investigate a hardware-aware approach to avoid these hooks and loops using biased noise ancillas. Using examples of bicycle bivariate codes and a cyclic hypergraph product code, which have been widely considered for practical application, we show that the effective fault-distance of the conventional syndrome extraction circuit can be significantly higher and the number of short loops can be significantly lower when the ancillas are subject to phase-flip errors only, compared to when they are also subject to bit-flip errors. This can result in almost an order of magnitude improvement in the logical error rate at circuit noise of 2×10−32\times 10^{-3}2×10−3 and when bit-flip errors in the ancilla are 50 times less likely than phase-flip errors. Our work demonstrates a significant and practical quantum error correction advantage with biased noise qubits in which full-bias cannot be maintained.
Quantum error correction (QEC) with single-shot decoding enables reduction of errors after every single round of noisy stabilizer measurement, easing the time-overhead requirements for fault tolerance. Notably, several classes of quantum low-density-parity-check (qLDPC) codes are known which facilitate single-shot decoding, potentially giving them an additional overhead advantage. However, the perceived advantage of single-shot decoding is limited because it can significantly degrade the effective code distance. This degradation may be compensated for by using a much larger code size to achieve the desired target logical error rate, at the cost of increasing the amount of syndrome information to be processed, as well as, increasing complexity of logical operations. Alternatively, in this work we study sliding-window decoding, which corrects errors from previous syndrome measurement rounds while leaving the most recent errors for future correction. We observe that sliding-window decoding significantly improves the logical memory lifetime and hence the effective distance compared to single-shot decoding on hypergraph-product codes and lifted-product codes. Remarkably, we find that this improvement may not cost a larger decoding complexity. Thus, the sliding-window strategy can be more desirable for fast and accurate decoding for fault-tolerant quantum computing with qLDPC codes.