Neutral Atom Quantum Computing (NAQC) is an emerging modality for scalable quantum computation, valued for its long coherence times and the naturally identical atomic qubits. However, one of the main drawbacks is its slow execution rate, dominated by lengthy classical processing tasks, such as fluorescence imaging, cooling, and atom rearrangement. We address this bottleneck with AtomFlow, a field-programmable gate array (FPGA)-based control architecture that consolidates fluorescence-image analysis and a newly developed atom-rearrangement algorithm onto a single Zynq UltraScale+ device. By co-locating the two stages on the same board and emitting rearrangement moves in a streaming fashion as soon as they are computed, AtomFlow eliminates the round-trip latency of conventional host-mediated pipelines. Evaluated on a 16x16 atom array, AtomFlow achieves an end-to-end latency of 25.3 ms with a first-move latency of 4 ms and an average move generation of 1 ms. Furthermore, our scalability analysis demonstrates that the architecture can readily support larger atom arrays within a single-board resource budget.
Comments
Accepted for 2026 IEEE International Conference on Quantum Computing and Engineering (QCE)
Neutral Atom Quantum Computing (NAQC) is an emerging modality for scalable quantum computation, valued for its long coherence times and the naturally identical atomic qubits. However, one of the main drawbacks is its slow execution rate, dominated by lengthy classical processing tasks, such as fluorescence imaging, cooling, and atom rearrangement. We address this bottleneck with AtomFlow, a field-programmable gate array (FPGA)-based control architecture that consolidates fluorescence-image analysis and a newly developed atom-rearrangement algorithm onto a single Zynq UltraScale+ device. By co-locating the two stages on the same board and emitting rearrangement moves in a streaming fashion as soon as they are computed, AtomFlow eliminates the round-trip latency of conventional host-mediated pipelines. Evaluated on a 16x16 atom array, AtomFlow achieves an end-to-end latency of 25.3 ms with a first-move latency of 4 ms and an average move generation of 1 ms. Furthermore, our scalability analysis demonstrates that the architecture can readily support larger atom arrays within a single-board resource budget.
In recent years, neutral atom quantum computers (NAQCs) have attracted a lot of attention, primarily due to their long coherence times and good scalability. One of their main drawbacks is their comparatively time-consuming control overhead, with one of the main contributing procedures being the detection of individual atoms and measurement of their states, each occurring at least once per compute cycle and requiring fluorescence imaging and subsequent image analysis.To reduce the required time budget, we propose a highly-parallel atom-detection accelerator for tweezer-based NAQCs. Building on an existing solution, our design combines algorithm-level optimization with a field-programmable gate array (FPGA) implementation to maximize parallelism and reduce the run time of the image analysis process. Our design can analyze a 256×256-pixel image representing a 10×10 atom array in just 115 μs on a Xilinx UltraScale+ FPGA. Compared to the original CPU baseline and our optimized CPU version, we achieve about 34.9× and 6.3× speedup of the reconstruction time, respectively. Moreover, this work also contributes to the ongoing efforts toward fully integrated FPGA-based control systems for NAQCs.
In recent years, neutral atom quantum computers (NAQCs) have attracted a lot of attention, primarily due to their long coherence times and good scalability. One of their main drawbacks is their comparatively time-consuming control overhead, with one of the main contributing procedures being the detection of individual atoms and measurement of their states, each occurring at least once per compute cycle and requiring fluorescence imaging and subsequent image analysis. To reduce the required time budget, we propose a highly-parallel atom-detection accelerator for tweezer-based NAQCs. Building on an existing solution, our design combines algorithm-level optimization with a field-programmable gate array (FPGA) implementation to maximize parallelism and reduce the run time of the image analysis process. Our design can analyze a 256$\times256−pixelimagerepresentinga10\times$10 atom array in just 115 μs on a Xilinx UltraScale+ FPGA. Compared to the original CPU baseline and our optimized CPU version, we achieve about 34.9× and 6.3× speedup of the reconstruction time, respectively. Moreover, this work also contributes to the ongoing efforts toward fully integrated FPGA-based control systems for NAQCs.
Neutral atom quantum computers (NAQCs) are among the most promising computational platforms for quantum computing. Controlling and measuring individual atoms and their states, which often requires multiple imaging and image-analysis procedures, is typically the most time-consuming task during computation and contributes significantly to overall cycle times. To resolve this challenge, we propose a highly-parallel atom-detection accelerator for tweezer-based NAQCs. Our design builds on an existing state-reconstruction method and combines an algorithm-level optimization with a Field Programmable Gate Array (FPGA) implementation to maximize parallelism and reduce the run time of the image-analysis process. We identify and overcome several challenges for an FPGA implementation, such as introducing a prefetching mechanism to improve scalability and customizing bus transfers to support large bandwidths. Tested on a Xilinx UltraScale+ FPGA, our design can analyze a 256x256-pixel fluorescence image in just 115mus, achieving 34.9x and 6.3x speedups over the original and optimized CPU baseline, respectively. Moreover, our accelerator can maintain consistent resource utilization across various atom array sizes, contributing to the ongoing efforts toward scalable and fully integrated FPGA-based control systems for NAQCs.
The scalability of neutral atom quantum computing demands integrated electronic control systems with low latency, modular architecture, and real-time feedback capability. Here, we present an FPGA-based electronic control system that eliminates the PC from the feedback loop, integrating photon counting, real-time decision-making, and waveform generation within a unified PXIe architecture. The system achieves a total feedback latency of 282μs and is validated in practical experiments by assembling defect-free atom arrays from 24 stochastically loaded optical tweezers. A single-round rearrangement achieves a filling fraction of ∼96%, while feedback-controlled iterative rearrangement over five rounds boosts the success probability for generating a 10-atom defect-free array from 65.7% to 95.4%. This system establishes the electronic infrastructure necessary for mid-circuit measurement and real-time quantum error correction on neutral-atom platforms.
Neutral atoms have emerged as a promising technology for implementing quantum computers due to their scalability and long coherence times. However, the execution frequency of neutral atom quantum computers is constrained by image processing procedures, particularly the assembly of defect-free atom arrays, which is a crucial step in preparing qubits (atoms) for execution. To optimize this assembly process, we propose a novel quadrant-based rearrangement algorithm that employs a divide-and-conquer strategy and also enables the simultaneous movement of multiple atoms, even across different columns and rows. We implement the algorithm on Field Programmable Gate Arrays (FPGAs) to handle each quadrant independently (hardware-level optimization) while maximizing parallelization. To the best of our knowledge, this is the first hardware acceleration work for atom rearrangement, and it significantly reduces the processing time. This achievement also contributes to the ongoing efforts of tightly integrating quantum accelerators into High-Performance Computing (HPC) systems. Tested on a Zynq RFSoC FPGA at 250 MHz, our hardware implementation is able to complete the rearrangement process of a 30 × 30 compact target array, derived from a 50 × 50 initial loaded array, in approximately 1.0 μs. Compared to a comparable CPU implementation and to state-of-the-art FPGA work, we achieved about 54 x and 300 x speedups in the rearrangement analysis time, respectively. Additionally, the FPGA-based acceleration demonstrates good scalability, allowing for seamless adaptation to varying sizes of the atom array, which makes this algorithm a promising solution for large-scale quantum systems.
Efficient quantum error correction and fault-tolerant quantum computing require scalable, high-fidelity long-range connectivity. In neutral-atom quantum computers, this is commonly achieved through atom transport, but shuttling introduces latency and motional heating that worsen with system size. Here, we introduce a neutral-atom architecture based on static atomic buses, in which auxiliary mediator atoms enable long-range entangling operations without qubit transport. The architecture naturally supports long-range stabilizer measurements in high-rate LDPC codes and transversal logical gates between neighboring surface-code patches, enabling a modular framework for efficient logical memories, Clifford computation, and magic-state distillation. To realize these capabilities, we co-design optimal-control protocols for bus-mediated controlled-Z gates that incorporate both microscopic neutral-atom dynamics and architectural constraints. We obtain smooth bus-mediated gates with fidelities approaching 99.9% and durations of a few hundred nanoseconds by combining time-optimal control with interaction-flatness and robustness constraints. Large-scale simulations of quantum error correction and logical entangling operations between neighboring surface-code patches predict more than an order-of-magnitude improvement in logical error rates compared with atom-shuttling architectures under realistic noise. The architecture achieves logical gate times of approximately 100 us and quantum-error-correction cycle times of about 1 ms for code distances d<12. These results establish static atomic buses as a practical alternative to atom shuttling for scalable fault-tolerant neutral-atom quantum computing.