Rydberg atomic receiver has emerged as promising candidate for next-generation wireless communication, due to the exceptional sensitivity and ability to overcome the physical limitations of traditional radio frequency antennas. Utilizing the resonant response of atomic energy levels for signal detection, Rydberg atomic receiver is inherently confined to a narrow instantaneous bandwidth. However, in high-mobility scenarios such as satellite communications, the severe Doppler effect induces carrier frequency offsets, which drive the signal beyond the instantaneous bandwidth and result in severe distortion. In this paper, we propose an adaptive local oscillator (LO) tracking Rydberg atomic receiver architecture designed to lock high-dynamic signals within the effective atomic response bandwidth. By employing a cross-product automatic frequency control (CPAFC) algorithm, the system dynamically estimates the instantaneous frequency offset, generates a corresponding error control signal, and adjusts the LO frequency through a feedback loop. Consequently, the intermediate frequency signal can always be locked close to the center of the atomic response bandwidth regardless of dynamics. Simulation results show that the proposed architecture significantly outperforms existing Rydberg atomic receiver, effectively alleviating performance degradation in high-dynamic environments.
Rydberg atomic receiver has emerged as promising candidate for next-generation wireless communication, due to the exceptional sensitivity and ability to overcome the physical limitations of traditional radio frequency antennas. Utilizing the resonant response of atomic energy levels for signal detection, Rydberg atomic receiver is inherently confined to a narrow instantaneous bandwidth. However, in high-mobility scenarios such as satellite communications, the severe Doppler effect induces carrier frequency offsets, which drive the signal beyond the instantaneous bandwidth and result in severe distortion. In this paper, we propose an adaptive local oscillator (LO) tracking Rydberg atomic receiver architecture designed to lock high-dynamic signals within the effective atomic response bandwidth. By employing a cross-product automatic frequency control (CPAFC) algorithm, the system dynamically estimates the instantaneous frequency offset, generates a corresponding error control signal, and adjusts the LO frequency through a feedback loop. Consequently, the intermediate frequency signal can always be locked close to the center of the atomic response bandwidth regardless of dynamics. Simulation results show that the proposed architecture significantly outperforms existing Rydberg atomic receiver, effectively alleviating performance degradation in high-dynamic environments.
In this paper, we propose a self-superheterodyne Rydberg uniform array receiver for satellite uplink communications, in which the Doppler shift naturally induced by satellite motion is exploited to generate the intermediate-frequency signal. We first develop a near-field local oscillator (LO) synthesis model and characterize the spatially varying LO electric field across the Rydberg vapor cells. Based on a vapor-cell-center approximation, a closed-form radio frequency (RF)-to-optical conversion is derived, establishing an explicit bridge between the incident satellite signal and the LO-induced cell-level response. The derived model reveals that the programmable LO serves as an analog-domain channel-shaping mechanism by controlling the cell-level transduction gain, phase response, and phase-matching behavior. Building upon this equivalent channel model, we formulate an LO design problem that maximizes the Shannon capacity of the effective channel, and develop an efficient optimization algorithm for the LO amplitudes and phases. Simulation results demonstrate that the vapor-cell transduction can reshape the effective channel, adjust the beam-pattern alignment, and moderately reduce the inter-user correlation under suitable LO configurations. Furthermore, the proposed LO design significantly improves the achievable capacity over benchmark schemes, offering a promising self-superheterodyne Rydberg architecture for future satellite communication systems.
We demonstrate an atom-based amplitude-modulation (AM) receiver for digital communication with a weak continuous frequency carrier using a Rydberg AC Stark effect in a vapor cell and achieve the operating carrier frequency continuously from 0.1 GHz to 5 GHz at a single Rydberg state. A strong local oscillator (LO) field E LO acts as a gain to shift the Rydberg level to a high sensitivity region, and a weak carrier field E Carr keeps the same frequency with the LO field. The digital baseband signals are encoded onto the E Carr using the amplitude modulation technique with the different modulation frequency. The response of Rydberg atom to the baseband signal is probed via a Rydberg electromagnetically induced transparency (EIT). The measured instantaneous bandwidth of the system is about 230 kHz. To demonstrate the performance of our system for an actual communication, we consider a color image as an example, the received image displays that the bit error rate (BER) is less than 5% when the maximum data transfer rate is about 238 kbps. Meanwhile, our system shows the weak carrier field of E Carr ≥ 13.52 μ V/cm can be used for the practical communication with BER less than 5%. Our works break the limitation that EIT-AT based atomic receivers only operate at the near resonant frequencies of the Rydberg transitions, making this emerging of quantum technology close to the practical application with high sensitivity and broad bandwidth.
Rydberg atomic (RA) receivers represent a revolutionary quantum technology for wireless communications, offering unprecedented sensitivity beyond conventional radio frequency (RF) antennas. However, these receivers detect only signal amplitude, losing critical phase information. While reference signals generated by a local oscillator (LO) can assist in phase recovery, existing modulation schemes designed for conventional systems perform poorly with this quantum detection mechanism. This paper introduces a breakthrough LO-aware adaptive modulation (LOAM) scheme specifically developed for RA receivers that dynamically adapts to complex fading channel coefficients. LOAM maximizes the minimum amplitude difference between constellation points, ensuring optimal detection performance. The innovation employs an adaptive co-linear constellation architecture aligned with the combined phase of reference signal and channel coefficient. For strong reference signals, LOAM generates symmetric constellation points centered at origin; for weak signals, it adopts non-symmetric distributions. The paper mathematically derives the threshold governing these operational regimes. Simulation results reveal the transformative impact of LOAM, demonstrating performance gains exceeding 45 dB over conventional modulation schemes, including quadrature amplitude modulation (QAM), phase-shift keying (PSK), and pulse-amplitude modulation (PAM).
Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.
Rydberg atomic receivers (RARs) have emerged as a promising candidate for next-generation wireless communication systems due to their broadband tunability, SI traceability, compact configuration, and omnidirectional reception. Currently, the primary challenge hindering the further large-scale deployment of RARs lies in the low data transmission rates, which is attributed to the narrow instantaneous bandwidth. This work improves data transmission rates from a signal processing perspective, proposing a cost-effective and operationally efficient solution. The Rydberg-atom-based electro-optic conversion (RAEOC) system behaves as a linear system under strong local oscillator biasing and small-signal excitation. Specifically, we develop a dynamic response model for the RAEOC system and derive its frequency-response expression via time-dependent perturbation theory, Laplace transformation, and vectorization-based computation. Furthermore, we establish a comprehensive RAR communication simulation framework. Monte Carlo simulations demonstrate that the frequency-domain estimation and equalization algorithm can significantly improve the bit error rate performance of RARs in broadband signal reception. Our equalization method suppresses inherent passband distortion in RAR systems to enhance data throughput under finite bandwidth.
Rydberg atomic receivers (RARs) leverage the quantum coherence of highly excited atoms to overcome the intrinsic physical limitations of conventional radio frequency receivers (RFRs), particularly in sensitivity, and bandwidth. This innovative technology represents a paradigm shift in wireless communication systems. This paper systematically explains the fundamental sensing mechanisms of RARs, contrasts their differences from RFRs in working principles and architectures. We explore their advantages in emerging wireless communication scenarios, such as integrated sensing and communications, quantum Rydberg radar, and quantum space communications. Practical challenges, such as limited instantaneous bandwidth and nonlinear distortion, are identified. To address these issues, mitigation strategies and future research directions are also outlined, supporting the advancement of RAR-aided wireless systems.