Rydberg-atomic receivers exhibit exceptional sensitivity yet are fundamentally constrained by the narrow instantaneous bandwidth, limiting their practical deployment in broadband scenarios. Prior approaches typically expand the bandwidth by physically broadening the atomic response, which usually requires auxiliary electromagnetic fields or stringent parameter tuning, thereby increasing overall system complexity. Here, we propose a compressive spectral multiplexing framework implemented in a waveguide-coupled Rydberg atomic receiver using a frequency-modulated local oscillator (FMLO). The FMLO creates multiple parallel sensing channels that collectively constitute a physical compressive sensing matrix, generating multiple narrowband intermediate-frequency replicas of the input signal. Thus, a broadband microwave spectrum is projected onto a set of narrowband atomic responses. It is demonstrated that spectral information spanning a bandwidth of over 640 MHz can be effectively compressed into the intrinsic atomic bandwidth of 126 kHz, achieving a spectrum compression ratio exceeding 1000. Furthermore, these output replicas offer intrinsic measurement redundancy and facilitate signal-to-noise ratio enhancement. An approximate 10 dB gain is achieved in the required bit-energy-to-noise-power-density ratio for multi-channel communication via maximal-ratio combining. This approach requires no auxiliary fields or broadband electronics, providing a simple and scalable pathway for chip-scale quantum receivers, latency-critical sensing, and next-generation wireless communications.
Rydberg-atomic receivers exhibit exceptional sensitivity yet are fundamentally constrained by the narrow instantaneous bandwidth, limiting their practical deployment in broadband scenarios. Prior approaches typically expand the bandwidth by physically broadening the atomic response, which usually requires auxiliary electromagnetic fields or stringent parameter tuning, thereby increasing overall system complexity. Here, we propose a compressive spectral multiplexing framework implemented in a waveguide-coupled Rydberg atomic receiver using a frequency-modulated local oscillator (FMLO). The FMLO creates multiple parallel sensing channels that collectively constitute a physical compressive sensing matrix, generating multiple narrowband intermediate-frequency replicas of the input signal. Thus, a broadband microwave spectrum is projected onto a set of narrowband atomic responses. It is demonstrated that spectral information spanning a bandwidth of over 640 MHz can be effectively compressed into the intrinsic atomic bandwidth of 126 kHz, achieving a spectrum compression ratio exceeding 1000. Furthermore, these output replicas offer intrinsic measurement redundancy and facilitate signal-to-noise ratio enhancement. An approximate 10 dB gain is achieved in the required bit-energy-to-noise-power-density ratio for multi-channel communication via maximal-ratio combining. This approach requires no auxiliary fields or broadband electronics, providing a simple and scalable pathway for chip-scale quantum receivers, latency-critical sensing, and next-generation wireless communications.
Rydberg-atom-based microwave (MW) sensors offer high sensitivity and intrinsic traceability, but their instantaneous bandwidth is fundamentally limited by atomic coherence time. Here, we introduce a scalable sensing architecture that overcomes this limitation by spatially multiplexing atomic detection channels with a Stark comb, in which an MW frequency comb (MFC) and a position-dependent Stark field enable each Rydberg vapor cell to function as an independent frequency-selective heterodyne receiver. We experimentally validate the 210 MHz instantaneous-bandwidth channelized receiver architecture through sequential characterization of individual Stark-shifted channels using a 21-line MFC, while maintaining an overall sensitivity of 326.6 nVcm −1 Hz −1/2 despite a 160 MHz tuning of the carrier resonance frequency. Full simultaneous operation across the 210 MHz bandwidth requires parallel implementation and readout of all channels. This scalable architecture enables on-demand instantaneous bandwidth while preserving sensitivity, providing a pathway toward real-time broadband MW detection for radar, communications, and spectrum monitoring.
Broadband Rydberg Atomic Microwave Sensing with 44.6MHz Instantaneous Bandwidth
Rydberg atoms have become a promising novel type of microwave sensor due to their excellent physical properties -- broad frequency coverage and large electric dipole moments. High sensitivity and broad instantaneous bandwidth are two indispensable requirements for deployable Rydberg microwave sensors. However, enabling broadband operation while retaining high sensitivity has been a longstanding barrier limiting their applications. We propose and experimentally demonstrate a Rydberg microwave sensor whose instantaneous bandwidth is significantly enhanced via an auxiliary microwave field. By finely modulating the Rydberg energy levels with this field, we broaden the bandwidth substantially while retaining the sensor's inherent high sensitivity. An instantaneous bandwidth of 44.6MHz ($\pm22.3\,MHz)withasensitivityof225.7\,nV\,cm^{-1}\,Hz^{-1/2}$ is realized in a thermal 87Rb vapor with the local microwave frequency of 16.03GHz. Our work delivers concurrent broad instantaneous bandwidth and high sensitivity for Rydberg microwave sensors, paving a technically viable path for their practical deployment in broadband microwave metrology, radar, and wireless communication.
Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.
Ultra-broadband anti-jamming communication represents a promising approach to secure and robust information transfer through spread-spectrum techniques, effectively combatting malicious interference and eavesdropping. Rydberg atoms, enhanced by waveguide coupling, facilitate ultra-broadband spectrum sensing without traditional RF components. This framework provides an experimental platform for ultra-wide anti-jamming communication. Here, we demonstrate real-time signal demodulation based on frequency-hopping spread spectrum (FHSS) in a waveguide-coupled Rydberg receiver, achieving ultra-broad frequency-hopping covering 100 kHz to 20 GHz and a hopping rate of 100 khop/s. When confined to a standard operational band (e.g., the 2.4 GHz ISM band), our system achieves a high channel density of 8 channels per MHz. Beyond this, by leveraging its ultra-broad and continuous bandwidth, the system supports over 150,000 channels. Experimental results reveal a 51 dB enhancement in narrowband interference tolerance compared with single-frequency systems, confirming its outstanding anti-jamming capability. The reported system demonstrates significant potential for secure communications based on quantum technology, especially communication in complex electromagnetic environments.
Quantum sensing using Rydberg atoms offers unprecedented opportunities for next-generation radar systems, transcending classical limitations in miniaturization and spectral agility. Implementing this paradigm for radar sensing, this work proposes a quantum-enhanced radar reception architecture enabled by the emerging Rydberg atomic receiver, replacing conventional antenna-to-mixer chains with a centimeter-scale vapor cell. The proposed approach is based on electromagnetically induced transparency with the Autler-Townes splitting enabling direct RF-to-optical downconversion within the atomic medium via an external co-frequency reference. To circumvent the intrinsic bottleneck on instantaneous bandwidth of atomic receiver, we invoke a non-uniform stepped-frequency synthesis strategy combining coarse laser frequency tuning with fine AC-Stark shift compensation. Additionally, we establish a nonlinear response model of the Rydberg atomic homodyne receiver and propose a customized nonlinear compensation method that extends the linear dynamic range by over 7 dB. We develop a compressive sensing algorithm (CS-Rydberg) to suppress noise and mitigate the undersampling problem. Experimentally, we demonstrate a compact prototype achieving centimeter-level ranging precision (RMSE = 1.06 cm) within 1.6-1.9 m. By synthesizing GHz-bandwidth (2.6-3.6 GHz), resolvable target separations down to 15 cm are observed under controlled sparse scenarios. These results not only validate the feasibility of quantum sensing based on Rydberg atomic receivers but also underscore the architecture's inherent scalability: by harnessing the atoms' ultra-broad spectral response, the synthesized bandwidth can be extended well beyond the current range, enabling sub-centimeter resolution in future radar systems while preserving quantum-traceable calibration and a highly simplified front end.
Quantum sensing using Rydberg atoms offers unprecedented opportunities for next-generation radar systems, transcending classical limitations in miniaturization and spectral agility. This work proposes a quantum-enhanced radar reception architecture that replaces conventional antenna-tomixer chains with a centimeter-scale vapor cell as a quantum radio frequency (RF) field sensor and mixer, enabling this paradigm for radar sensing. This approach is based on electromagnetically induced transparency, which uses Autler-Townes splitting to enable direct RF-to-optical downconversion within the atomic medium via an external co-frequency reference. To circumvent the range-resolution limitation imposed by the narrow instantaneous response of the atomic receiver, we adopt a stepped-frequency synthesis strategy involving the hybrid manipulation of Rydberg energy states. This strategy combines coarse laser frequency tuning with fine AC-Stark shift compensation. Additionally, we establish a nonlinear response model of the Rydberg atomic homodyne receiver and propose a customized nonlinear compensation method that extends the linear dynamic range by over 7 dB. We developed a compressive sensing-based algorithm (CS-Rydberg) to suppress noise and mitigate the undersampling problem. Experimentally, we demonstrate a compact prototype that achieves centimeter-level ranging precision (RMSE = 1.06 cm) within 1.6–1.9 m. By synthesizing a 1-GHz equivalent bandwidth via sparse stepped-frequency sampling over 2.6–3.6 GHz, we observe resolvable target separations down to 15 cm under controlled sparse scenarios. These results validate the feasibility of quantum sensing based on Rydberg atomic receivers and underscore the architecture’s scalability. By harnessing the atoms’ ultrabroad spectral response, the synthesized bandwidth can extend well beyond the current range. This enables sub-centimeter resolution in future radar systems while preserving quantum traceable calibration and a highly simplified front end.