Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2606.28528 · Materials for Quantum Technology

High yield creation of germanium vacancy centers in diamond by focused ion beam implantation and high temperature annealing

S. Dietel, E. Scattolo, J. Fuhrmann, L. Kazak, A. Cian, E. Missale, D. Giubertoni, F. Jelezko

quant-phcond-mat.mtrl-sciSubmitted Jun 26, 2026• Announced Jun 30, 2026• 0 citations
arXivHTMLPDF

Abstract

Negatively charged germanium vacancy centers (GeV) in diamond are a promising platform for quantum computing and quantum communication. However, these applications require the precise incorporation of GeV centers with good optical properties inside of nanophotonic structures. In this work, we demonstrate the highly efficient local creation of GeV centers in diamond via focused-ion-beam implantation, followed by high-temperature annealing. We report the successful creation of GeV centers over the depth range of 5.5 - 30 nm. Implantation at low fluence enables the creation of single GeV centers. The formation yield strongly depends on implantation energy and fluence, reaching up to 33% at energies of 35 and 70 keV. This method, therefore, enables the efficient creation of GeV centers within a small, well-defined local sample volume and offers a potential means of incorporating them into photonic structures.

DOI
10.1088/2633-4356/aea514

Related papers

Direct writing of single germanium vacancy center arrays in diamond

Yu Zhou, Zhao Mu, Giorgio Adamo +4 more

Color centers in diamond are promising solid-state qubits for scalable quantum photonics applications. Amongst many defects, those with inversion symmetry are of an interest due to their promising optical properties. In this work, we demonstrate a maskless implantation of an array of bright, single germanium vacancy (GeV) centers in diamond. Employing the direct focused ion beam technique, single GeV emitters are engineered with the spatial accuracy of tens of nanometers. The single GeV creation ratio reaches as high as 53% with the dose of 200 Ge + ions per spot. The presented fabrication method is promising for future nanofabrication of integrated photonic structures with GeV emitters as a leading platform for spin-spin interactions.

New Journal of Physics•Nov 21, 2018•49 citations

Integration of germanium-vacancy single photon emitters arrays in diamond nanopillars

Elisa Redolfi, Vanna Pugliese, Elia Scattolo +10 more

Abstract The nanoscale fabrication of μm-spaced single-photon emitter arrays is crucial for the development of integrated photonic chips. We report on the fabrication and systematic characterization of germanium-vacancy (GeV) color centers arrays in diamond obtained upon ion implantation at the nanoscale. Ge2+ ion implantations at 35 keV and 70 keV energies were carried out using a focused ion beam (FIB) equipped with a liquid metal alloy ion source. The arrays of emitters are subsequently aligned to ø300 nm nanopillar waveguiding structures, fabricated using a combination of electron-beam lithography and plasma etching. The photon collection efficiency and photoluminescence (PL) signal-to-background ratio increased by a factor 8 with respect to the unstructured sample. The photophysical properties of the GeV emitters fabricated by this approach were unaltered with respect to those found in unprocessed diamond. The efficiency of the overall manufacturing process to fabricate individual GeV centers was assessed. Up to 33% of the fabricated nanopillars, depending on ion implantation parameters, were found to contain single emitters.

EPJ Quantum Technology•Feb 18, 2025•6 citations

Germanium-Vacancy Single Color Centers in Diamond

Takayuki Iwasaki, Fumitaka Ishibashi, Yoshiyuki Miyamoto +13 more

Atomic-sized fluorescent defects in diamond are widely recognized as a promising solid state platform for quantum cryptography and quantum information processing. For these applications, single photon sources with a high intensity and reproducible fabrication methods are required. In this study, we report a novel color center in diamond, composed of a germanium (Ge) and a vacancy (V) and named the GeV center, which has a sharp and strong photoluminescence band with a zero-phonon line at 602 nm at room temperature. We demonstrate this new color center works as a single photon source. Both ion implantation and chemical vapor deposition techniques enabled fabrication of GeV centers in diamond. A first-principles calculation revealed the atomic crystal structure and energy levels of the GeV center.

Scientific Reports•Aug 7, 2015•353 citations

Array of bright silicon-vacancy centers in diamond fabricated by low-energy focused ion beam implantation

Syuto Tamura, Godai Koike, Akira Komatsubara +12 more

Among promising color centers for single-photon sources in diamond, the negatively charged silicon-vacancy (SiV − ) has 70% of its emission to the zero-phonon line (ZPL), in contrast to the negatively charged nitrogen vacancy (NV − ), which has a broad spectrum. Fabricating single centers of useful defect complexes with high yield and excellent grown-in defect properties by ion implantation has proven to be challenging. We have fabricated bright single SiV − centers by 60-keV focused ion beam implantation and subsequent annealing at 1000 °C with high positioning accuracy and a high yield of 15%.

Applied Physics Express•Oct 15, 2014•90 citations

Long optical coherence times of shallow-implanted, negatively charged silicon vacancy centers in diamond

Johannes Lang, Stefan Häußler, Jens Fuhrmann +6 more

The creation of single, negatively charged silicon vacancy (SiV−) centers in well-defined diamond layers close to the host surface is a crucial step for the development of diamond-based quantum optic devices with many applications in nanophotonics, quantum sensing, or quantum information science. Here, we report on the creation of shallow (10 nm below the surface), single SiV− centers in diamond using low energy Si+ ion implantation with subsequent high temperature annealing at 1500 °C. We show transition linewidths down to 99 MHz and narrow inhomogeneous distributions. Furthermore, we achieved a reduction of homogeneous linewidths by a factor of 2 after removing subsurface damage using oxygen plasma processing. These results not only give insights into the formation process of SiV− centers but also indicate a favorable processing method to fabricate shallow single quantum emitters in diamond perfectly suited for coupling to nanostructures on the diamond surface.

Applied Physics Letters•Feb 10, 2020•33 citations

Engineering of nitrogen-vacancy color centers in high purity diamond by ion implantation and annealing

Julius O. Orwa, Charles Santori, Kai‐Mei C. Fu +11 more

The negatively-charged nitrogen-vacancy (NV) center is the most studied optical center in diamond and is very important for applications in quantum information science. Many proposals for integrating NV centers in quantum and sensing applications rely on their tailored fabrication in ultra pure host material. In this study, we use ion implantation to controllably introduce nitrogen into high purity, low nitrogen chemical vapor deposition diamond samples. The properties of the resulting NV centers are studied as a function of implantation temperature, annealing temperature, and implantation fluence. We compare the implanted NV centers with native NV centers present deep in the bulk of the as-grown samples. The results for implanted NV centers are promising but indicate, at this stage, that the deep native NV centers possess overall superior optical properties. In particular, the implanted NV centers obtained after annealing at 2000 °C under a stabilizing pressure of 8 GPa showed an ensemble linewidth of 0.17 nm compared to 0.61 nm after annealing at 1000 °C. Over the same temperature range, the ensemble NV−/NV0 ratio increased by a factor of ∼5, although this was accompanied by an overall decrease in the NV count.

Journal of Applied Physics•Apr 15, 2011•122 citations
Negatively charged germanium vacancy centers (GeV) in diamond are a promising platform for quantum computing and quantum communication. However, these applications require the precise incorporation of GeV centers with good optical properties inside of nanophotonic structures. In this work, we demonstrate the highly efficient local creation of GeV centers in diamond via focused-ion-beam implantation, followed by high-temperature annealing. We report the successful creation of GeV centers over the depth range of 5.5 - 30 nm. Implantation at low fluence enables the creation of single GeV centers. The formation yield strongly depends on implantation energy and fluence, reaching up to 33% at energies of 35 and 70 keV. This method, therefore, enables the efficient creation of GeV centers within a small, well-defined local sample volume and offers a potential means of incorporating them into photonic structures.
Color centers in diamond are promising solid-state qubits for scalable quantum photonics applications. Amongst many defects, those with inversion symmetry are of an interest due to their promising optical properties. In this work, we demonstrate a maskless implantation of an array of bright, single germanium vacancy (GeV) centers in diamond. Employing the direct focused ion beam technique, single GeV emitters are engineered with the spatial accuracy of tens of nanometers. The single GeV creation ratio reaches as high as 53% with the dose of 200 Ge + ions per spot. The presented fabrication method is promising for future nanofabrication of integrated photonic structures with GeV emitters as a leading platform for spin-spin interactions.
Abstract The nanoscale fabrication of μm-spaced single-photon emitter arrays is crucial for the development of integrated photonic chips. We report on the fabrication and systematic characterization of germanium-vacancy (GeV) color centers arrays in diamond obtained upon ion implantation at the nanoscale. Ge2+ ion implantations at 35 keV and 70 keV energies were carried out using a focused ion beam (FIB) equipped with a liquid metal alloy ion source. The arrays of emitters are subsequently aligned to ø300 nm nanopillar waveguiding structures, fabricated using a combination of electron-beam lithography and plasma etching. The photon collection efficiency and photoluminescence (PL) signal-to-background ratio increased by a factor 8 with respect to the unstructured sample. The photophysical properties of the GeV emitters fabricated by this approach were unaltered with respect to those found in unprocessed diamond. The efficiency of the overall manufacturing process to fabricate individual GeV centers was assessed. Up to 33% of the fabricated nanopillars, depending on ion implantation parameters, were found to contain single emitters.
Atomic-sized fluorescent defects in diamond are widely recognized as a promising solid state platform for quantum cryptography and quantum information processing. For these applications, single photon sources with a high intensity and reproducible fabrication methods are required. In this study, we report a novel color center in diamond, composed of a germanium (Ge) and a vacancy (V) and named the GeV center, which has a sharp and strong photoluminescence band with a zero-phonon line at 602 nm at room temperature. We demonstrate this new color center works as a single photon source. Both ion implantation and chemical vapor deposition techniques enabled fabrication of GeV centers in diamond. A first-principles calculation revealed the atomic crystal structure and energy levels of the GeV center.
Among promising color centers for single-photon sources in diamond, the negatively charged silicon-vacancy (SiV − ) has 70% of its emission to the zero-phonon line (ZPL), in contrast to the negatively charged nitrogen vacancy (NV − ), which has a broad spectrum. Fabricating single centers of useful defect complexes with high yield and excellent grown-in defect properties by ion implantation has proven to be challenging. We have fabricated bright single SiV − centers by 60-keV focused ion beam implantation and subsequent annealing at 1000 °C with high positioning accuracy and a high yield of 15%.
The creation of single, negatively charged silicon vacancy (SiV−) centers in well-defined diamond layers close to the host surface is a crucial step for the development of diamond-based quantum optic devices with many applications in nanophotonics, quantum sensing, or quantum information science. Here, we report on the creation of shallow (10 nm below the surface), single SiV− centers in diamond using low energy Si+ ion implantation with subsequent high temperature annealing at 1500 °C. We show transition linewidths down to 99 MHz and narrow inhomogeneous distributions. Furthermore, we achieved a reduction of homogeneous linewidths by a factor of 2 after removing subsurface damage using oxygen plasma processing. These results not only give insights into the formation process of SiV− centers but also indicate a favorable processing method to fabricate shallow single quantum emitters in diamond perfectly suited for coupling to nanostructures on the diamond surface.
The negatively-charged nitrogen-vacancy (NV) center is the most studied optical center in diamond and is very important for applications in quantum information science. Many proposals for integrating NV centers in quantum and sensing applications rely on their tailored fabrication in ultra pure host material. In this study, we use ion implantation to controllably introduce nitrogen into high purity, low nitrogen chemical vapor deposition diamond samples. The properties of the resulting NV centers are studied as a function of implantation temperature, annealing temperature, and implantation fluence. We compare the implanted NV centers with native NV centers present deep in the bulk of the as-grown samples. The results for implanted NV centers are promising but indicate, at this stage, that the deep native NV centers possess overall superior optical properties. In particular, the implanted NV centers obtained after annealing at 2000 °C under a stabilizing pressure of 8 GPa showed an ensemble linewidth of 0.17 nm compared to 0.61 nm after annealing at 1000 °C. Over the same temperature range, the ensemble NV−/NV0 ratio increased by a factor of ∼5, although this was accompanied by an overall decrease in the NV count.