We extend Noise-Directed Adaptive Remapping (NDAR), a recently proposed heuristic meta-algorithm that leverages device noise as a computational resource, to optimization problems over discrete (integer) domains. While originally introduced for unconstrained binary optimization, the proposed generalization introduces additional gauge degrees of freedom at the logical level, such that the gauge transformation applied at each iteration is no longer unique, allowing tailoring to particular encodings or quantum hardware. We identify encoding-dependent requirements for NDAR beyond binary domains: feasibility of the noise attractor, existence of compatible gauge transformations that preserve an efficiently implementable circuit family, and a systematic way to select the transform to apply at each step. We analyze these criteria for qudit-native and for binary, one-hot, and domain-wall qubit encodings, using the Max-k-colorable subgraph problem as a running example. We demonstrate that these encodings can exhibit distinct advantages and tradeoffs when integrated within the NDAR framework, particularly in how noise-induced dynamics interact with the solution landscape and choice of encoding. Our results indicate that NDAR-guided noise considerations provide a new criterion for comparing device-level encoding choices for quantum optimization. Finally, we outline directions toward experimental realization in superconducting qudit devices and further algorithmic improvements.
We extend Noise-Directed Adaptive Remapping (NDAR), a recently proposed heuristic meta-algorithm that leverages device noise as a computational resource, to optimization problems over discrete (integer) domains. While originally introduced for unconstrained binary optimization, the proposed generalization introduces additional gauge degrees of freedom at the logical level, such that the gauge transformation applied at each iteration is no longer unique, allowing tailoring to particular encodings or quantum hardware. We identify encoding-dependent requirements for NDAR beyond binary domains: feasibility of the noise attractor, existence of compatible gauge transformations that preserve an efficiently implementable circuit family, and a systematic way to select the transform to apply at each step. We analyze these criteria for qudit-native and for binary, one-hot, and domain-wall qubit encodings, using the Max-k-colorable subgraph problem as a running example. We demonstrate that these encodings can exhibit distinct advantages and tradeoffs when integrated within the NDAR framework, particularly in how noise-induced dynamics interact with the solution landscape and choice of encoding. Our results indicate that NDAR-guided noise considerations provide a new criterion for comparing device-level encoding choices for quantum optimization. Finally, we outline directions toward experimental realization in superconducting qudit devices and further algorithmic improvements.
We present Noise-Directed Adaptive Remapping (NDAR), a heuristic algorithm for approximately solving binary optimization problems by leveraging certain types of noise. We consider access to a noisy quantum processor with dynamics that features a global attractor state. In a standard setting, such noise can be detrimental to the quantum optimization performance. Our algorithm bootstraps the noise attractor state by iteratively gauge-transforming the cost-function Hamiltonian in a way that transforms the noise attractor into higher-quality solutions. The transformation effectively changes the attractor into a higher-quality solution of the Hamiltonian based on the results of the previous step. The end result is that noise aids variational optimization, as opposed to hindering it. We present an improved Quantum Approximate Optimization Algorithm (QAOA) runs in experiments on Rigetti's quantum device. We report approximation ratios 0.9 - 0.96 for random, fully connected graphs on n = 82 qubits, using only depth p = 1 QAOA with NDAR. This compares to 0.34 - 0.51 for standard p = 1 QAOA with the same number of function calls.
Progress towards a quantum advantage using known heuristic methods for combinatorial optimization is impeded by hardware noise and limited qubit count. Here, we propose a noise-aware adaptive approach to quantum approximate optimization, Noise-Directed Adaptive Warm-Starting (ND-AWS), that builds on recent concepts such as Warm-Start QAOA and Noise-Directed Adaptive Remapping. By leveraging bitflip gauge transformations, our algorithm exploits amplitude-damping-like noise components. We experimentally implement high-performance quantum optimization ansätze on 100-qubit Ising Hamiltonians, showing that ND-AWS generally improves the performance over a non-gauge-transformed iterative Warm-Starting variant, at no additional circuit cost. This places our results among the highest-quality demonstrations of quantum optimization with similar ansätze at this scale. Crucially, the simplicity of the framework opens the door for future enhancements such as adaptive bias schedules, and integration with classical solvers.
Quantum approximate optimization is one of the promising candidates for useful quantum computation, particularly in the context of finding approximate solutions to Quadratic Unconstrained Binary Optimization (QUBO) problems. However, the existing quantum processing units (QPUs) are of relatively small size, and canonical mappings of QUBO via the Ising model require one qubit per variable, rendering direct large-scale optimization infeasible. In classical optimization, a general strategy for addressing many large-scale problems is via multilevel/multigrid methods, where the large target problem is iteratively coarsened and the global solution is constructed from multiple small-scale optimization runs. In this work, we experimentally test how existing QPUs perform when used as a sub-solver within such a multilevel strategy. To this aim, we combine and extend (via additional classical processing steps) the recently proposed Noise-Directed Adaptive Remapping (NDAR) and Quantum Relax & Round (QRR) algorithms. We first demonstrate the effectiveness of our heuristic extensions on Rigetti's superconducting transmon device Ankaa-2. We find approximate solutions to 10 instances of fully connected 82-qubit Sherrington-Kirkpatrick graphs with random integer-valued coefficients obtaining normalized approximation ratios (ARs) in the range∼0.98−1.0, and the same class with real-valued coefficients (ARs∼0.94−1.0). Then, we implement the extended NDAR and QRR algorithms as subsolvers in the multilevel algorithm for 6 large-scale graphs with at most∼27,000variables. In practice, the QPU (with classical post-processing steps) is used to find approximate solutions to dozens of at most 82-qubit problems, which are iteratively used to construct the global solution. We observe that quantum optimization results are competitive in terms of the quality of solutions when compared to classical heuristics used as subsolvers within the multilevel approach. Reproducibility: source code and data will be available at [1].
The Noise-Directed Adaptive Remapping (NDAR) method utilizes amplitude damping noise to enhance the performance of quantum optimization algorithms. NDAR alternates between exploration by sampling solutions from the quantum circuit and exploitation by transforming the cost Hamiltonian by changing the signs of its terms. Both exploration and exploitation are important components in classical heuristic algorithm design. In this study, we examine how NDAR performance improves by adjusting the balance between these components. We control the degree of exploitation by varying the delay time to 0, 50, and 100μs, and investigate exploration strategies using two quantum circuits, QAOA and a random circuit, on IBM's Heron processor. Our results show that increasing delay time in NDAR improves the best objective value found in each iteration. In single-layer QAOA and random circuits applied to unweighted Max-Cut problem with low edge density, both exploration strategies yield similar objective value trajectories and provide competitive solution quality to simulated annealing for the 80-node problem. Their similar performance indicates that, in most cases, increasing amplitude damping noise via additional delay time results in information loss. On the other hand, QAOA outperforms random circuits in specific cases, such as positive-negative weighted Max-Cut on a fully connected graph. This suggests potential advantages of QAOA in more complex settings. We further develop a classical NDAR to better understand exploration strategies, demonstrating that controlling the Hamming weight distribution of sampled bitstrings yields higher quality solutions. This suggests that identifying suitable quantum circuits for exploration could enhance NDAR performance.
Quantum Optimization (QO) is emerging as a promising approach to tackle hard combinatorial optimization problems by leveraging the unique computational properties of quantum hardware. In recent years, QO has gained traction in Machine Learning (ML), where problems such as clustering and vector quantization can be naturally expressed as Quadratic Unconstrained Binary Optimization (QUBO) problems. These ML applications often involve complex, high-dimensional data, which directly influences both the structure and scale of the resulting QUBO formulations. However, current quantum devices fall under the category of Noisy Intermediate-Scale Quantum (NISQ) hardware, which imposes significant limitations on qubit counts and small error rates. This dissertation investigates the impact of data complexity and data scale—as encountered in ML settings—on the effectiveness and feasibility of QO on NISQ devices. We propose novel, hardware-aware methods to overcome these challenges. The first part of this thesis focuses on the effect of data complexity for QO. We analyze how problem structure—particularly when QUBO formulations are derived from ML tasks—affects quantum solvability. We identify the spectral gap as a key factor in the success of adiabatic quantum algorithms and provide a theoretical and empirical analysis linking data-induced complexity to optimization performance.To address noise sensitivity and limited precision, we introduce a preprocessing framework based on a principled Branch-and-Bound algorithm that reduces dynamic range while preserving global optima. This improves robustness on both quantum annealers and classical solvers. In the second part, the thesis addresses challenges introduced by data scale. First, we propose a recursive Divide-and-Conquer strategy that breaks down large QUBO problems into tractable subproblems, demonstrated through an application to Bundle Adjustment in 3D scene reconstruction. Second, we introduce a variable and constraint generation method inspired by column generation for Integer Linear Programming, enabling dynamic QUBO size growth. This technique is successfully applied to Multi-Agent Pathfinding, where it scales well on NISQ devices while maintaining compatibility with classical solvers. Finally, we explore QUBO reformulations that reduce problem size through compact encodings and cyclic expansion, enabling the use of quantum hardware for tasks such as FPGA placement in chip design. Across all contributions, the developed algorithms are evaluated both theoretically and empirically, with experiments conducted on real quantum and quantum-inspired hardware. These methods significantly improve solution quality, scalability, and hardware compatibility, paving the way for more effective use of QO in practical settings. While tailored for NISQ era constraints, the results remain relevant for fault-tolerant quantum computing, offering insights into the long-term viability of QO across hardware generations.
Noise in current quantum hardware (NISQ devices) poses a major obstacle by degrading gate operations and overall circuit fidelity toward FTQC. Traditional quantum error correction (QEC) is effective but resource-intensive, requiring several extra qubits and operations beyond the reach of near-term devices. Quantum error mitigation (QEM) offers a complementary path by reducing the impact of error prior to full correction. We present an adaptive pulse-level QEM using genetic algorithms to dynamically adjust control pulses in real-time, improving algorithm fidelity without modifying the logic structure of a quantum circuit. By targeting pulse parameters directly, this method reduces the impact of various noise sources, improving algorithm resilience in quantum circuits. To demonstrate the effectiveness of our methodology, we apply our protocol to five key quantum algorithms, including Bernstein-Vazirani, DeutschJozsa, Grover's search, Quantum Fourier Transform (QFT), and its inverse (IQFT). Experimental results show that our pulse-level optimization strategy provides a flexible and efficient solution for increasing fidelity during the noisy execution of quantum circuits. Our work contributes to advance error mitigation techniques, essential for robust quantum computing, which will increasingly require HPC infrastructure as quantum systems scale.