The Quantum Approximate Optimization Algorithm (QAOA) is a leading variational algorithm for combinatorial optimization on near term quantum devices. As circuit depth increases, the number of optimization parameters grows, making the search landscape increasingly nonlinear and difficult to optimize. Previous studies have shown that optimal QAOA parameters often lie on a low dimensional manifold that can be approximated using Principal Component Analysis (PCA) at shallow circuit depths. However, the effectiveness of PCA decreases at higher depths because the underlying parameter manifold becomes increasingly nonlinear. In this work, we investigate Kernel Principal Component Analysis (KPCA) with a radial basis function kernel as a nonlinear dimensionality reduction technique for QAOA parameter optimization. The model is trained using 200 graphs from each of 3 graph families, namely Erdos-Renyi, Barabasi-Albert, and Watts-Strogatz, with graph sizes ranging from 7 to 10 nodes. Performance is evaluated on 30 test graphs containing 12 nodes at circuit depths 1, 2, 4, and 8. Experimental results demonstrate that KPCA consistently outperforms PCA at deeper circuit depths across all graph families. At depth 8, KPCA achieves approximation ratios above 0.86, while PCA declines to approximately 0.81 to 0.83. Both methods reduce the number of quantum circuit evaluations by more than 93 percent relative to unrestricted QAOA optimization. These findings suggest that nonlinear kernel methods more effectively capture the structure of the QAOA parameter manifold and provide a practical approach for scaling variational quantum optimization to deeper circuits.
Comments
10 pages, 3 figures, submitted to IEEE Quantum Week Conference
The Quantum Approximate Optimization Algorithm (QAOA) is a leading variational algorithm for combinatorial optimization on near term quantum devices. As circuit depth increases, the number of optimization parameters grows, making the search landscape increasingly nonlinear and difficult to optimize. Previous studies have shown that optimal QAOA parameters often lie on a low dimensional manifold that can be approximated using Principal Component Analysis (PCA) at shallow circuit depths. However, the effectiveness of PCA decreases at higher depths because the underlying parameter manifold becomes increasingly nonlinear. In this work, we investigate Kernel Principal Component Analysis (KPCA) with a radial basis function kernel as a nonlinear dimensionality reduction technique for QAOA parameter optimization. The model is trained using 200 graphs from each of 3 graph families, namely Erdos-Renyi, Barabasi-Albert, and Watts-Strogatz, with graph sizes ranging from 7 to 10 nodes. Performance is evaluated on 30 test graphs containing 12 nodes at circuit depths 1, 2, 4, and 8. Experimental results demonstrate that KPCA consistently outperforms PCA at deeper circuit depths across all graph families. At depth 8, KPCA achieves approximation ratios above 0.86, while PCA declines to approximately 0.81 to 0.83. Both methods reduce the number of quantum circuit evaluations by more than 93 percent relative to unrestricted QAOA optimization. These findings suggest that nonlinear kernel methods more effectively capture the structure of the QAOA parameter manifold and provide a practical approach for scaling variational quantum optimization to deeper circuits.
The Quantum Approximate Optimization Algorithm (QAOA) is a promising variational algorithm for solving combinatorial optimization problems on near-term devices. However, as the number of layers in a QAOA circuit increases, which is correlated with the quality of the solution, the number of parameters to optimize grows linearly. This results in more iterations required by the classical optimizer, which results in an increasing computational burden as more circuit executions are needed. To mitigate this issue, we introduce QAOA-PCA, a novel reparameterization technique that employs Principal Component Analysis (PCA) to reduce the dimensionality of the QAOA parameter space. By extracting principal components from optimized parameters of smaller problem instances, QAOA-PCA facilitates efficient optimization with fewer parameters on larger instances. Our empirical evaluation on the prominent MaxCut problem demonstrates that QAOA-PCA consistently requires fewer iterations than standard QAOA, achieving substantial efficiency gains. While this comes at the cost of a slight reduction in approximation ratio compared to QAOA with the same number of layers, QAOA-PCA almost always outperforms standard QAOA when matched by parameter count. QAOA-PCA strikes a favorable balance between efficiency and performance, reducing optimization overhead without significantly compromising solution quality.
The quantum approximate optimization algorithm (QAOA) generates an approximate solution to combinatorial optimization problems using a variational ansatz circuit defined by parameterized layers of quantum evolution. In theory, the approximation improves with increasing ansatz depth but gate noise and circuit complexity undermine performance in practice. Here, we investigate a multi-angle ansatz for QAOA that reduces circuit depth and improves the approximation ratio by increasing the number of classical parameters. Even though the number of parameters increases, our results indicate that good parameters can be found in polynomial time for a test dataset we consider. This new ansatz gives a 33% increase in the approximation ratio for an infinite family of MaxCut instances over QAOA. The optimal performance is lower bounded by the conventional ansatz, and we present empirical results for graphs on eight vertices that one layer of the multi-angle anstaz is comparable to three layers of the traditional ansatz on MaxCut problems. Similarly, multi-angle QAOA yields a higher approximation ratio than QAOA at the same depth on a collection of MaxCut instances on fifty and one-hundred vertex graphs. Many of the optimized parameters are found to be zero, so their associated gates can be removed from the circuit, further decreasing the circuit depth. These results indicate that multi-angle QAOA requires shallower circuits to solve problems than QAOA, making it more viable for near-term intermediate-scale quantum devices.
The quantum approximate optimization algorithm (QAOA) has numerous promising applications in solving the combinatorial optimization problems on near-term Noisy Intermediate Scalable Quantum (NISQ) devices. QAOA has a quantum-classical hybrid structure. Its quantum part consists of a parameterized alternating operator ansatz, and its classical part comprises an optimization algorithm, which optimizes the parameters to maximize the expectation value of the problem Hamiltonian. This expectation value depends highly on the parameters, this implies that a set of good parameters leads to an accurate solution. However, at large circuit depth of QAOA, it is difficult to achieve global optimization due to the multiple occurrences of local minima or maxima. In this paper, we propose a parameters fixing strategy which gives high approximation ratio on average, even at large circuit depths, by initializing QAOA with the optimal parameters obtained from the previous depths. We test our strategy on the Max-cut problem of certain classes of graphs such as the 3-regular graphs and the Erdös-Rényi graphs.
The Quantum Approximate Optimization Algorithm (QAOA) is one of the promising near-term algorithms designed to find approximate solutions for combinatorial optimization problems. The algorithm prepares a parametrized state that is aimed to maximize the expectation value of the objective function of the problem. The circuit for QAOA consists of p layers, and it depends on 2p parameters, the determination of which can be carried out using a variational quantum eigensolver (VQE) subroutine. This is a variational approach for finding optimal parameters, where the quantum state is prepared with a quantum computer, and a classical computer is used for calculating the corresponding objective function value and performing an outer loop optimization routine in order to find optimal parameters. Earlier work on the algorithm has shown that QAOA is closely related to the Quantum Adiabatic Algorithm, which results in noticeable patterns in the optimal parameters. To this purpose, two methods, INTERP and FOURIER, were proposed to exploit this structure by Zhou et al. (2018). In this thesis, I extend upon these results by examining the effectiveness of one of their methods, the INTERP method, on the Max-Cut problem from graph theory. The performance of QAOA using this method was studied on several classes of graphs and benchmarked against the currently best-known classical algorithm Goemans-Williamson, which achieves an approximation ratio of ρ ≈ 0.878 on arbitrary graphs. The classes of graphs examined include cyclic, weighted and unweighted 3-regular, and Erdős–Rényi graphs with edge probabilities of 0.5 and 0.75 and graph sizes ranging from 4 to 16. Moreover, it was investigated if the INTERP method offers an advantage compared to random initialization of parameters and whether or not the method is polynomial in p. It was found that different graph classes lead to similar but different parameter patterns. Furthermore, the performance of QAOA using the INTERP method was dependent on the graph class considered. For the small graphs investigated it was found that QAOA outperforms Goemans-Williamson on ER-0.50, ER-0.75 and weighted 3-regular graphs from p=7 and beyond with respect to how well the expectation of the objective function approximates the optimal value, while for unweighted 3-regular graphs p=6 suffices. However, the calculation of the parameters is costly and requires a number of function evaluations that is on the order of the number of possible bipartitions of small graph with sizes n ≤ 16. Moreover, the numerical results suggested that indeed the method is polynomial in p advocating that the algorithm might be a strong alternative to Goemans-Williamson for large graph sizes, once hardware allows it.
Abstract Kernel principal component analysis (kernel PCA) is a nonlinear dimensionality reduction technique that employs kernel functions to map data into a high-dimensional feature space, thereby extending the applicability of linear PCA to nonlinear data and facilitating the extraction of informative principal components. However, kernel PCA necessitates the manipulation of large-scale matrices, leading to high computational complexity and posing challenges for efficient implementation in big data environments. Quantum computing has recently been integrated with kernel methods in machine learning, enabling effective analysis of input data within intractable feature spaces. Although existing quantum kernel PCA proposals promise exponential speedups, they impose stringent requirements on quantum hardware that are challenging to fulfill. In this work, we propose a quantum algorithm for kernel PCA by establishing a connection between quantum kernel methods and block encoding, thereby diagonalizing the centralized kernel matrix on a quantum computer. The query complexity is logarithmic with respect to the size of the data vector, D , and linear with respect to the size of the dataset. An exponential speedup could be achieved when the dataset consists of a few high-dimensional vectors, wherein the dataset size is polynomial in log ( D ) , with D being significantly large. In contrast to existing work, our algorithm enhances the efficiency of quantum kernel PCA and reduces the requirements for quantum hardware. Furthermore, we have also demonstrated that the algorithm based on block encoding matches the lower bound of query complexity, indicating that our algorithm is nearly optimal. Our research has laid down new pathways for developing quantum machine learning algorithms aimed at addressing tangible real-world problems and demonstrating quantum advantages within machine learning.
Abstract The Quantum approximate optimization algorithm (QAOA) is a quantum-classical hybrid algorithm aiming to produce approximate solutions for combinatorial optimization problems. In the QAOA, the quantum part prepares a quantum parameterized state that encodes the solution, where the parameters are optimized by a classical optimizer. However, it is difficult to find optimal parameters when the quantum circuit becomes deeper. Hence, there is numerous active research on the performance and the optimization cost of QAOA. In this work, we build a convolutional neural network to predict parameters of depth p + 1 QAOA instance by the parameters from the depth p QAOA counterpart. We propose two strategies based on this model. First, we recurrently apply the model to generate a set of initial values for a certain depth QAOA. It successfully initiates depth 10 QAOA instances, whereas each model is only trained with the parameters from depths less than 6. Second, the model is applied repetitively until the maximum expected value is reached. An average approximation ratio of 0.9759 for Max-Cut over 264 Erdős–Rényi graphs is obtained, while the optimizer is only adopted for generating the first input of the model.