Rydberg atomic quantum receivers have been seen as novel radio frequency measurements and the high sensitivity to a large range of frequencies makes it attractive for communications reception. However, their performance can be significantly degraded by hardware-induced noise, particularly the noise from laser, which impacts the overall system noise floor and exhibits correlation. To address this challenge, this paper proposes a weight hybrid (WH) architecture for Rydberg-atomic sensors, a novel four-channel combining scheme designed for atomic sensors operating in correlated noise environments. By jointly processing dual signal channels and dual noise reference channels, the WH architecture effectively mitigates noise contributions from lasers and other hardware components. All channels are optimally combined via maximum likelihood estimation within an expectation maximization framework, enabling robust signal extraction under correlated noise. Moreover, the proposed WH architecture is universal and can be readily extended to other types of Rydberg receivers to achieve consistent performance improvements.
Rydberg atomic quantum receivers have been seen as novel radio frequency measurements and the high sensitivity to a large range of frequencies makes it attractive for communications reception. However, their performance can be significantly degraded by hardware-induced noise, particularly the noise from laser, which impacts the overall system noise floor and exhibits correlation. To address this challenge, this paper proposes a weight hybrid (WH) architecture for Rydberg-atomic sensors, a novel four-channel combining scheme designed for atomic sensors operating in correlated noise environments. By jointly processing dual signal channels and dual noise reference channels, the WH architecture effectively mitigates noise contributions from lasers and other hardware components. All channels are optimally combined via maximum likelihood estimation within an expectation maximization framework, enabling robust signal extraction under correlated noise. Moreover, the proposed WH architecture is universal and can be readily extended to other types of Rydberg receivers to achieve consistent performance improvements.
Rydberg atomic quantum receivers have been seen as novel radio frequency measurements and the high sensitivity to a large range of frequencies makes it attractive for communications reception. However, current implementations of Rydberg array antennas predominantly rely on simple stacking of multiple single-antenna units. While conceptually straightforward, this approach leads to substantial system bulkiness due to the unique requirements of atomic sensors, particularly the need for multiple spatially separated laser setups, rendering such designs both impractical for real-world applications and challenging to fabricate. This limitation underscores the critical need for developing multiplexed Rydberg sensor array architectures. In the domain of conventional RF array antennas, hybrid analog-digital beamforming has emerged as a pivotal architecture for large-scale millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems, as it substantially reduces the hardware complexity associated with fully-digital beamforming while closely approaching its performance. Drawing inspiration from this methodology, we conduct a systematic study in this work on the design principles, equivalent modeling, and precoding strategies for low-complexity multiplexed Rydberg array, an endeavor crucial to enabling practical and scalable quantum-enhanced communication systems.
Quantum sensing using Rydberg atoms offers unprecedented opportunities for next-generation radar systems, transcending classical limitations in miniaturization and spectral agility. This work proposes a quantum-enhanced radar reception architecture that replaces conventional antenna-tomixer chains with a centimeter-scale vapor cell as a quantum radio frequency (RF) field sensor and mixer, enabling this paradigm for radar sensing. This approach is based on electromagnetically induced transparency, which uses Autler-Townes splitting to enable direct RF-to-optical downconversion within the atomic medium via an external co-frequency reference. To circumvent the range-resolution limitation imposed by the narrow instantaneous response of the atomic receiver, we adopt a stepped-frequency synthesis strategy involving the hybrid manipulation of Rydberg energy states. This strategy combines coarse laser frequency tuning with fine AC-Stark shift compensation. Additionally, we establish a nonlinear response model of the Rydberg atomic homodyne receiver and propose a customized nonlinear compensation method that extends the linear dynamic range by over 7 dB. We developed a compressive sensing-based algorithm (CS-Rydberg) to suppress noise and mitigate the undersampling problem. Experimentally, we demonstrate a compact prototype that achieves centimeter-level ranging precision (RMSE = 1.06 cm) within 1.6–1.9 m. By synthesizing a 1-GHz equivalent bandwidth via sparse stepped-frequency sampling over 2.6–3.6 GHz, we observe resolvable target separations down to 15 cm under controlled sparse scenarios. These results validate the feasibility of quantum sensing based on Rydberg atomic receivers and underscore the architecture’s scalability. By harnessing the atoms’ ultrabroad spectral response, the synthesized bandwidth can extend well beyond the current range. This enables sub-centimeter resolution in future radar systems while preserving quantum traceable calibration and a highly simplified front end.
Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.
Physical layer security (PLS) provides information-theoretic confidentiality for next-generation wireless systems, yet its practical deployment is fundamentally constrained by the sensitivity and noise characteristics of classical radio receivers. Recent advances in quantum sensing, particularly Rydberg atom-based receivers (RAQRs), present a promising approach to address these limitations. This paper introduces a Rydberg atomic quantum multiple-input multiple-output (RAQ-MIMO) architecture for secure multi-user uplink communications, where an array of Rydberg vapor cells functions as a high-sensitivity, reconfigurable receiving front-end. We develop a comprehensive end-to-end signal and channel model that incorporates quantum sensor response, wireless fading, and eavesdropper behavior under passive interception. To maximize the achievable secrecy rate, we propose a joint optimization framework that adaptively tunes key system degrees of freedom, including the Rabi frequency of the local oscillator, phase configuration, digital combining matrix, and user transmit power. Extensive simulations validate that RAQ-MIMO substantially outperforms classical MIMO in terms of secrecy rate across varying transmission distances, power budgets, and user loads—particularly under low-signal to noise ratio (SNR) and extended-range regimes. Our work establishes a quantum-sensing-assisted security foundation for future high-assurance wireless networks, bridging atomic physics with scalable communication system design with scalable communication system design under narrowband operation.
Rydberg-atom quantum receivers (RAQRs) offer highly sensitive RF reception, but their communication performance depends jointly on atomic response, optical transduction, receiver noise, bandwidth, and wireless-channel conditions. This paper develops a BER-aware communication-theoretic framework for superheterodyne RAQR-assisted wireless communication, linking four-level Rydberg-atom dynamics and coherent optical detection to multipath propagation and digital communication performance. Closed-form instantaneous and average SNR and BER expressions are derived for square Gray-coded M-QAM over correlated Rayleigh fading. The RAQR operating point is then jointly optimized over atomic, optical, RF, and geometric parameters using analytical block-wise updates within a fixed-point procedure subject to physical and bandwidth constraints. Numerical results demonstrate substantial gains in low-power reception, bandwidth utilization, robustness to detuning, fading and delay spread, outage, and communication coverage compared with conventional, advanced, and fixed-point RAQR receivers. The results demonstrate that BER-aware joint optimization translates the intrinsic sensitivity of Rydberg-atom sensing into tangible communication-level gains.
Image interference is a common issue in heterodyne reception structures, introducing co-channel interference and degrading performance. Although the heterodyne structure significantly improves the sensitivity of the Rydberg-atom-based receiver, the presence of image interference limits its practical application. In this work, we design a quadrature reception structure with a Rydberg-atom-based receiver and experimentally evaluate its performance. This architecture provides orthogonal receiving channels, down-converting input signals into complex form and enabling the separation of image-frequency components. Experiments confirm that conventional heterodyne reception suffers from image interference, while our quadrature structure effectively cancels it after channel compensation. The demonstrated Rydberg-atom-based quadrature receiver shows strong potential for wireless communication and precision measurement, especially in multi-signal environments.