Quantum error correction (QEC) enables fault-tolerant quantum computation but requires operating quantum hardware at physical error rates below code-dependent thresholds, which remains challenging for current devices. We introduce syndrome resampling, a general method that increases QEC thresholds of any decoder and suppresses logical errors without additional hardware, decoding modifications, or code-specific assumptions beyond syndrome statistics. The method exploits the fact that syndromes with low probability are likely to lead to logical failure, therefore biasing syndrome averages towards most likely syndromes effectively increases logical fidelities. We establish a direct connection between the Rényi coherent information (RCI) and powers of the syndrome probability distribution, showing that resampling syndromes according to these powers combined with maximum likelihood decoding (MLD) realizes a family of optimal thresholds associated with phase transitions in the RCI. Numerical simulations of surface codes demonstrate that syndrome resampling substantially increases thresholds for both optimal and suboptimal decoders and reduces logical error rates by up to four orders of magnitude in experimentally relevant regimes. We further show that syndrome resampling can be effectively implemented from finite data and combined with decoding-based post-selection to achieve additional gains. Finally, applying the method to existing experimental QEC data yields up to two orders of magnitude reduction in logical error rates without requiring additional measurements. Our results provide a practical and decoder-agnostic route to improved logical fidelities in near-term QEC experiments.
Quantum error correction (QEC) enables fault-tolerant quantum computation but requires operating quantum hardware at physical error rates below code-dependent thresholds, which remains challenging for current devices. We introduce syndrome resampling, a general method that increases QEC thresholds of any decoder and suppresses logical errors without additional hardware, decoding modifications, or code-specific assumptions beyond syndrome statistics. The method exploits the fact that syndromes with low probability are likely to lead to logical failure, therefore biasing syndrome averages towards most likely syndromes effectively increases logical fidelities. We establish a direct connection between the Rényi coherent information (RCI) and powers of the syndrome probability distribution, showing that resampling syndromes according to these powers combined with maximum likelihood decoding (MLD) realizes a family of optimal thresholds associated with phase transitions in the RCI. Numerical simulations of surface codes demonstrate that syndrome resampling substantially increases thresholds for both optimal and suboptimal decoders and reduces logical error rates by up to four orders of magnitude in experimentally relevant regimes. We further show that syndrome resampling can be effectively implemented from finite data and combined with decoding-based post-selection to achieve additional gains. Finally, applying the method to existing experimental QEC data yields up to two orders of magnitude reduction in logical error rates without requiring additional measurements. Our results provide a practical and decoder-agnostic route to improved logical fidelities in near-term QEC experiments.
Quantum error correction (QEC) is indispensable for realizing fault-tolerant quantum computation, yet its effectiveness hinges critically on the classical decoding algorithm that interprets noisy syndrome measurements. Among all possible decoding strategies, maximum likelihood decoding (MLD) is provably optimal, since it identifies the logical group with largest likelihood by summing over all possible errors within logical class consistent with the observed syndrome. Despite its optimality, MLD is computationally intractable in general (#P-hard), motivating a rich landscape of exact and approximate algorithms. In this topical review, we provide a unified perspective on MLD by surveying recent advances through three complementary lenses: statistical mechanics, tensor networks, and artificial intelligence. From the statistical mechanics viewpoint, the MLD problem maps onto evaluating partition functions of disordered spin models, enabling exact solutions for certain codes and noise models as well as threshold estimation via phase-transition analysis. From the tensor network perspective, approximate contraction of tensor networks on the code's factor graph yields decoders that closely approach MLD accuracy with polynomial computational cost. From the artificial intelligence perspective, neural-network-based decoders, including autoregressive generative models and recurrent transformers, learn to approximate the MLD distribution from data, achieving high accuracy with the parallelism afforded by modern hardware accelerators. We discuss the connections among these three approaches, review their application to both simulated and experimental quantum hardware, and outline open challenges including real-time decoding, scalability to large code distances, and generalization to high-rate quantum low-density parity-check codes.
Quantum error correction can be enhanced by post-selecting out runs that are likely to produce a logical failure, but the most accurate measures for that require costly decoder-level information. We introduce a practical, decoder-agnostic post-selection method that learns directly from syndrome data. The method trains a supervised classifier to distinguish between syndromes from low- and high-noise regimes, and then uses the classifier's output as an abort score for new runs, without requiring logical-error labels, correction operators, or code-specific likelihood calculations. We validate the approach in three complementary settings: circuit-level simulations of the Gross bivariate-bicycle code, code-capacity simulations of the surface code, and experimental logical magic-state distillation data from the QuEra neutral-atom processor. In the Gross and surface codes, learned syndrome post-selection reduces the conditional logical error rate at a fixed acceptance rate, with performance comparable to syndrome-weight filtering. For the surface code, the learned classifier reveals a post-selection transition distinct from the conventional decoding threshold. In the experimental data, the machine-learning score outperforms syndrome-weight post-selection and, when combined with logical-gap filtering, improves the output fidelity beyond using the logical gap alone. These results show that syndrome-only learning provides a scalable and hardware-compatible route to improving the reliability of quantum error correction.
Quantum error mitigation (QEM) is typically viewed as a suite of practical techniques for today's noisy intermediate-scale quantum devices, with limited relevance once fault-tolerant quantum computers become available. In this work, we challenge this conventional wisdom by showing that QEM can continue to provide substantial benefits in the era of quantum error correction (QEC), and in an even more efficient manner than it does on current devices. We introduce a framework for logical-level QEM that leverages soft information naturally produced by QEC decoders, requiring no additional data, hardware modifications, or runtime overhead beyond what QEC protocols already provide. Within this framework, we develop and analyze three logical-level QEM techniques: post-selection and runtime abort policies, probabilistic error cancellation, and zero-noise extrapolation. Our techniques reduce logical error rates by more than 100x while discarding fewer than 0.1% of shots; they also provide in situ characterization of logical channels for QEM protocols. As a proof of principle, we benchmark our approach using a surface-code architecture and two state-of-the-art decoders based on tensor-network contraction and minimum-weight perfect matching. We evaluate logical-level QEM on random Clifford circuits and molecular simulation algorithms and find that, compared to previous approaches relying on QEC only or QEC combined with QEM, we can achieve up to 87.4% spacetime overhead savings. Our results demonstrate that logical-level QEM with QEC decoder soft information can reliably improve logical performance, underscoring the efficiency and usefulness of QEM techniques for fault-tolerant quantum computers.
Quantum error correction offers a promising path for performing high fidelity quantum computations. Although fully fault-tolerant executions of algorithms remain unrealized, recent improvements in control electronics and quantum hardware enable increasingly advanced demonstrations of the necessary operations for error correction. Here, we perform quantum error correction on superconducting qubits connected in a heavy-hexagon lattice. We encode a logical qubit with distance three and perform several rounds of fault-tolerant syndrome measurements that allow for the correction of any single fault in the circuitry. Using real-time feedback, we reset syndrome and flag qubits conditionally after each syndrome extraction cycle. We report decoder dependent logical error, with average logical error per syndrome measurement in Z(X)-basis of ~0.040 (~0.088) and ~0.037 (~0.087) for matching and maximum likelihood decoders, respectively, on leakage post-selected data.
Decoders for quantum error correction (QEC) experiments rely on detector error models (DEMs), which encode, for each error, its probability and the detectors and logical observables it flips. Here we show that estimating DEM event probabilities from experimental syndromes is feasible, avoids independent device benchmarking, and produces useful decoder priors for estimating and reducing decoded logical error probabilities. We evaluate our methods using open-source data from surface-code memory experiments performed on Google's Willow chip, and we carry out analogous surface-code experiments on IBM's \texttt{ibm\_miami} processor. Despite the different physical error scales of the Google and IBM devices, in both cases our estimated DEMs improve logical error probabilities relative to baseline device-informed DEMs, typically at the 5%−10% level and with larger gains in some IBM cases, without additional calibration circuits, decoder fine-tuning, or supervised fitting to logical outcomes.
Abstract The accumulation of physical errors 1–3 prevents the execution of large-scale algorithms in current quantum computers. Quantum error correction 4 promises a solution by encoding k logical qubits onto a larger number n of physical qubits, such that the physical errors are suppressed enough to allow running a desired computation with tolerable fidelity. Quantum error correction becomes practically realizable once the physical error rate is below a threshold value that depends on the choice of quantum code, syndrome measurement circuit and decoding algorithm 5 . We present an end-to-end quantum error correction protocol that implements fault-tolerant memory on the basis of a family of low-density parity-check codes 6 . Our approach achieves an error threshold of 0.7% for the standard circuit-based noise model, on par with the surface code 7–10 that for 20 years was the leading code in terms of error threshold. The syndrome measurement cycle for a length- n code in our family requires n ancillary qubits and a depth-8 circuit with CNOT gates, qubit initializations and measurements. The required qubit connectivity is a degree-6 graph composed of two edge-disjoint planar subgraphs. In particular, we show that 12 logical qubits can be preserved for nearly 1 million syndrome cycles using 288 physical qubits in total, assuming the physical error rate of 0.1%, whereas the surface code would require nearly 3,000 physical qubits to achieve said performance. Our findings bring demonstrations of a low-overhead fault-tolerant quantum memory within the reach of near-term quantum processors.