Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2604.27761 · Optica

Macroscopic photon counting beating the Poisson noise limit

Timon Schapeler, Fabian Schlue, Isabell Mischke, Michael Stefszky, Benjamin Brecht, Christine Silberhorn, Tim J. Bartley

quant-phphysics.ins-detSubmitted Apr 30, 2026• Announced May 1, 2026• 0 citations
arXivHTMLPDF

Abstract

Photon counting is a cornerstone of quantum optics. Here, we demonstrate precisely counting from 0 to over 9000 photons, beating the Poisson noise limit by at least $4.1~\mathrm{dB}$ across this range. We achieve sub-single-photon precision up to 276 photons per pulse. To do so, we multiplex eight intrinsically photon-number-resolving superconducting nanowire single-photon detectors across 128 temporal modes. We use a model-informed characterization of each of the 1024 detection bins, for optimal precision. We perform quantum detector tomography to reconstruct the positive operator valued measures (POVMs) of the complete device, which consists of $1.38\cdot10^8$ matrix elements. At the repetition rate of our experiment of $80~\mathrm{kHz}$, we can precisely count photons corresponding to an optical power of approximately $71~\mathrm{pW}$, bridging the gap from single-photon measurements to high-sensitivity optical power meters. A photon-number-resolving detector of this size, and the tools used to analyze it, will become increasingly important to characterize large quantum states, as well as tasks in precision metrology and optical power standards.

Comments
9 pages, 5 figures and 6 pages, 4 figures

Related papers

Towards linear optical detection with single photon sensitivity at telecom wavelengths

Saeedeh Jahanmirinejad, Andrea Fiore

Standard linear optical detectors have a maximum sensitivity in the few hundreds of photons range, limited by amplifier noise. On the other hand, single photon detectors, which are the most sensitive detectors, are strongly nonlinear: One or more photons result in the same output signal. Photon number resolving (PNR) detectors, which have the ability to discriminate the number of photons in a weak optical pulse, are of great importance in the field of quantum information processing and quantum cryptography. Moreover, a PNR detector with large dynamic range can cover the gap between these two detection modes. Such detectors are greatly desirable not only in quantum information science and technology, but also in any application dealing with low light levels. In this work, we propose a novel approach to photon number resolving detectors based on spatial multiplexing of nanowire superconducting single-photon detectors. In the proposed approach, N superconducting nanowires, each connected in parallel to an integrated resistor, are connected in series. Photon absorption in a nanowire switches its bias current to the parallel resistor, forming a voltage pulse across it. The sum of these voltages, proportional to the number of absorbed photons, is measured at the output. The use of a cryogenic preamplifier with high input impedance for the read-out increases the linearity, the signal to noise ratio, and the speed. With this combination, we expect to be able to count up to few tens of photons with high fidelity, excellent timing resolution, and very high sensitivity in the telecommunication wavelength range.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 21, 2012•2 citations

Array of superconducting nanowire single photon detectors resolving the number of photons in a weak optical pulse

Nicola Lusardi, A. Geraci, Ronan Gourgues +2 more

Determining the precise number of photons in a weak optical pulse is of crucial importance for imaging, computing or communication applications that use single photons or few photons to increase the performance of classical techniques. Single photons or pair of photons can for instance be used to enhance the resolution of optical imaging techniques or to transmit information with ultimate security using quantum cryptography. In order to maintain this performance gain in such applications, the exact number of photons must be measured and monitored. In this contribution we present a method to measure the number of photons in an optical pulse by using 7 superconducting nanowire single photon detectors. Since a single SNSPD is not sensitive to the number of incoming photons, the optical signal multiplexing is necessary to measure photon correlations among the channels and thus reconstruct the input photons statistics. The readout and counting of the photon arrivals is performed with a fast multi-channel Asynchronous-Correlated-Digital-Counter (ACDC) implemented in the Programmable Logic (PL) of a Xilinx ZYNQ-7020 SoC device. The test of the technique has been performed coupling a weak laser via a fiber multiplexer to an array of individually fiber-coupled detectors.

IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)•Oct 1, 2016•4 citations

Photon-Number-Resolving Single-Photon Detector with a System Detection Efficiency of 98% and Photon-Number Resolution of 32

Chaomeng Ding, Xing-Yu Zhang, Jia-Min Xiong +8 more

High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.

arXiv:2504.02202•ACS Photonics•Jul 4, 2025•18 citations

High-fidelity 0, 1 and 2 photon-number resolution in superconducting nanowire single-photon detectors for pulsed light

Fabio Auriemma, S M Junaid Bukhari, Daniela Salvoni +2 more

Abstract We experimentally demonstrate high-fidelity detection of 0, 1- and 2-photon states in a commercial superconducting nanowire single photon detector (SNSPD) under 20 MHz pulsed coherent illumination. The arrival of a different number of photons induces distinct temporal dynamics in the disruption of the superconducting state of the detector. Therefore, specific features emerge in the arrival-time histograms, that we show are directly correlated with the photon-number state. We show that, across a broad range of time-averaged light intensities, the probabilities of detecting 1- and 2 + -photon events collapse onto the Poisson distribution of coherent light. We identify the voltage detection threshold as a critical factor for photon number resolving (PNR) capabilities. Even under demanding conditions of high repetition rate illumination, we found that a high trigger level significantly enhances total detection fidelity, achieving 0.920 and 0.845 for 1-photon and for 2-photon events. These results correspond to remarkably low conditional misidentification probabilities, 0.000 02 and 0.0013, describing the classification error among detected 1- and 2-photon events. We identify an inherent 39 ps latency difference between single- and multi-photon detection events. We show that the measured 2-photon conditional misidentification probability corresponds to the one of a multiplexed PNR detector with 730 pixels. We believe that our findings provide a framework for developing high/fidelity spatially multiplexed SNSPD by exploiting the intrinsic PNR capabilities of individual constituting elements.

Superconductor Science and Technology•Sep 29, 2026•0 citations

Quantum detector tomography of a high dynamic-range superconducting nanowire single-photon detector

Timon Schapeler, Jan Philipp Höpker, Tim J. Bartley

Abstract We demonstrate and verify quantum detector tomography of a superconducting nanowire single-photon detector (SNSPD) in a multiplexing scheme which permits measurement of up to 71 000 photons per input pulse. We reconstruct the positive operator valued measure (POVM) of this device in the low photon-number regime, and use the extracted parameters to show the POVMs spanning the whole dynamic range of the device. We verify this by finding the mean photon number of a bright state. Our work shows that a reliable quantum description of large-scale SNSPD devices is possible, and should be applicable to other multiplexing configurations.

arXiv:2102.11596•Superconductor Science and Technology•Mar 15, 2021•9 citations

Towards linear optical detection with single photon sensitivity at telecommunication wavelengths

S. Jahanmirinejad, Andrea Fiore

The conventional optical detectors operate in a linear mode, but their sensitivity is limited due to the noise in the readout electronics. Single photon detectors, on the other hand, have the highest sensitivity, but are strongly nonlinear. Photon number resolving detectors, which can precisely determine the number of photons in weak optical pulses, are potential candidates to fill the gap between these two detection modes. We present the design of photon number resolving detectors with large dynamic range, based on spatial multiplexing of superconducting single photon detectors, with excellent timing resolution and very high sensitivity at the telecommunication wavelength range.

•Jan 1, 2011•0 citations
Photon counting is a cornerstone of quantum optics. Here, we demonstrate precisely counting from 0 to over 9000 photons, beating the Poisson noise limit by at least 4.1 dB4.1~\mathrm{dB}4.1 dB across this range. We achieve sub-single-photon precision up to 276 photons per pulse. To do so, we multiplex eight intrinsically photon-number-resolving superconducting nanowire single-photon detectors across 128 temporal modes. We use a model-informed characterization of each of the 1024 detection bins, for optimal precision. We perform quantum detector tomography to reconstruct the positive operator valued measures (POVMs) of the complete device, which consists of 1.38⋅1081.38\cdot10^81.38⋅108 matrix elements. At the repetition rate of our experiment of 80 kHz80~\mathrm{kHz}80 kHz, we can precisely count photons corresponding to an optical power of approximately 71 pW71~\mathrm{pW}71 pW, bridging the gap from single-photon measurements to high-sensitivity optical power meters. A photon-number-resolving detector of this size, and the tools used to analyze it, will become increasingly important to characterize large quantum states, as well as tasks in precision metrology and optical power standards.
Standard linear optical detectors have a maximum sensitivity in the few hundreds of photons range, limited by amplifier noise. On the other hand, single photon detectors, which are the most sensitive detectors, are strongly nonlinear: One or more photons result in the same output signal. Photon number resolving (PNR) detectors, which have the ability to discriminate the number of photons in a weak optical pulse, are of great importance in the field of quantum information processing and quantum cryptography. Moreover, a PNR detector with large dynamic range can cover the gap between these two detection modes. Such detectors are greatly desirable not only in quantum information science and technology, but also in any application dealing with low light levels. In this work, we propose a novel approach to photon number resolving detectors based on spatial multiplexing of nanowire superconducting single-photon detectors. In the proposed approach, N superconducting nanowires, each connected in parallel to an integrated resistor, are connected in series. Photon absorption in a nanowire switches its bias current to the parallel resistor, forming a voltage pulse across it. The sum of these voltages, proportional to the number of absorbed photons, is measured at the output. The use of a cryogenic preamplifier with high input impedance for the read-out increases the linearity, the signal to noise ratio, and the speed. With this combination, we expect to be able to count up to few tens of photons with high fidelity, excellent timing resolution, and very high sensitivity in the telecommunication wavelength range.
Determining the precise number of photons in a weak optical pulse is of crucial importance for imaging, computing or communication applications that use single photons or few photons to increase the performance of classical techniques. Single photons or pair of photons can for instance be used to enhance the resolution of optical imaging techniques or to transmit information with ultimate security using quantum cryptography. In order to maintain this performance gain in such applications, the exact number of photons must be measured and monitored. In this contribution we present a method to measure the number of photons in an optical pulse by using 7 superconducting nanowire single photon detectors. Since a single SNSPD is not sensitive to the number of incoming photons, the optical signal multiplexing is necessary to measure photon correlations among the channels and thus reconstruct the input photons statistics. The readout and counting of the photon arrivals is performed with a fast multi-channel Asynchronous-Correlated-Digital-Counter (ACDC) implemented in the Programmable Logic (PL) of a Xilinx ZYNQ-7020 SoC device. The test of the technique has been performed coupling a weak laser via a fiber multiplexer to an array of individually fiber-coupled detectors.
High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.
Abstract We experimentally demonstrate high-fidelity detection of 0, 1- and 2-photon states in a commercial superconducting nanowire single photon detector (SNSPD) under 20 MHz pulsed coherent illumination. The arrival of a different number of photons induces distinct temporal dynamics in the disruption of the superconducting state of the detector. Therefore, specific features emerge in the arrival-time histograms, that we show are directly correlated with the photon-number state. We show that, across a broad range of time-averaged light intensities, the probabilities of detecting 1- and 2 + -photon events collapse onto the Poisson distribution of coherent light. We identify the voltage detection threshold as a critical factor for photon number resolving (PNR) capabilities. Even under demanding conditions of high repetition rate illumination, we found that a high trigger level significantly enhances total detection fidelity, achieving 0.920 and 0.845 for 1-photon and for 2-photon events. These results correspond to remarkably low conditional misidentification probabilities, 0.000 02 and 0.0013, describing the classification error among detected 1- and 2-photon events. We identify an inherent 39 ps latency difference between single- and multi-photon detection events. We show that the measured 2-photon conditional misidentification probability corresponds to the one of a multiplexed PNR detector with 730 pixels. We believe that our findings provide a framework for developing high/fidelity spatially multiplexed SNSPD by exploiting the intrinsic PNR capabilities of individual constituting elements.
Abstract We demonstrate and verify quantum detector tomography of a superconducting nanowire single-photon detector (SNSPD) in a multiplexing scheme which permits measurement of up to 71 000 photons per input pulse. We reconstruct the positive operator valued measure (POVM) of this device in the low photon-number regime, and use the extracted parameters to show the POVMs spanning the whole dynamic range of the device. We verify this by finding the mean photon number of a bright state. Our work shows that a reliable quantum description of large-scale SNSPD devices is possible, and should be applicable to other multiplexing configurations.
The conventional optical detectors operate in a linear mode, but their sensitivity is limited due to the noise in the readout electronics. Single photon detectors, on the other hand, have the highest sensitivity, but are strongly nonlinear. Photon number resolving detectors, which can precisely determine the number of photons in weak optical pulses, are potential candidates to fill the gap between these two detection modes. We present the design of photon number resolving detectors with large dynamic range, based on spatial multiplexing of superconducting single photon detectors, with excellent timing resolution and very high sensitivity at the telecommunication wavelength range.