We propose a novel measurement-free scheme for stabilizing a spin-oscillator hybrid qubit via autonomous quantum error correction. The engineered Lindbladian renders the code space into an attractive steady-state subspace, realized by coupling the storage mode to a rapidly cooled bath through a controlled beam-splitter and spin-dependent displacement interactions. The continuous variable-discrete variable hybrid approach to autonomous quantum error correction preserves the hardware efficiency of conventional dissipation engineering while simplifying the required system-bath coupling. The construction is compatible with simple logical gates and leverages primitives already demonstrated in experimental platforms, such as trapped-ion systems, suggesting a practical route to hardware-efficient, noise-biased logical qubits without repeated syndrome measurements and feedforward.
We propose a novel measurement-free scheme for stabilizing a spin-oscillator hybrid qubit via autonomous quantum error correction. The engineered Lindbladian renders the code space into an attractive steady-state subspace, realized by coupling the storage mode to a rapidly cooled bath through a controlled beam-splitter and spin-dependent displacement interactions. The continuous variable-discrete variable hybrid approach to autonomous quantum error correction preserves the hardware efficiency of conventional dissipation engineering while simplifying the required system-bath coupling. The construction is compatible with simple logical gates and leverages primitives already demonstrated in experimental platforms, such as trapped-ion systems, suggesting a practical route to hardware-efficient, noise-biased logical qubits without repeated syndrome measurements and feedforward.
Abstract We propose an autonomous quantum error correction scheme using squeezed cat (SC) code against excitation loss in continuous-variable systems. Through reservoir engineering, we show that a structured dissipation can stabilize a two-component SC while autonomously correcting the errors. The implementation of such dissipation only requires low-order nonlinear couplings among three bosonic modes or between a bosonic mode and a qutrit. While our proposed scheme is device independent, it is readily implementable with current experimental platforms such as superconducting circuits and trapped-ion systems. Compared to the stabilized cat, the stabilized SC has a much lower dominant error rate and a significantly enhanced noise bias. Furthermore, the bias-preserving operations for the SC have much lower error rates. In combination, the stabilized SC leads to substantially better logical performance when concatenating with an outer discrete-variable code. The surface-SC scheme achieves more than one order of magnitude increase in the threshold ratio between the loss rate κ 1 and the engineered dissipation rate κ 2 . Under a practical noise ratio κ 1 / κ 2 = 10 −3 , the repetition-SC scheme can reach a 10 −15 logical error rate even with a small mean excitation number of 4, which already suffices for practically useful quantum algorithms.
We can encode a qubit in the energy levels of a quantum system.Relaxation and other dissipation processes lead to decay of the fidelity of this stored information.Is it possible to preserve the quantum information for a longer time by introducing additional drives and dissipation?The existence of autonomous quantum error correcting codes answers this question in the positive.Nonetheless, discovering these codes for a real physical system, i.e., finding the encoding and the associated driving fields and bath couplings, remains a challenge that has required intuition and inspiration to overcome.In this work, we develop and demonstrate a computational approach based on adjoint optimization for discovering autonomous quantum error correcting codes given a Hamiltonian description of a physical system.We implement an optimizer that searches for a logical subspace and control parameters to better preserve quantum information.We demonstrate our method on a system of a harmonic oscillator coupled to a lossy qubit, and find that varying the Hamiltonian distance in Fock space-a proxy for the control hardware complexity-leads to discovery of different and new error correcting schemes.We discover what we call the √ 3 code, realizable with a Hamiltonian distance d = 2, and propose a hardware-efficient implementation based on superconducting circuits.
Bosonic quantum error correction represents a route towards significant hardware overhead reduction for fault-tolerant quantum computation. However, controlling quantum harmonic oscillators that encode the quantum information comes with its own challenges. In many platforms such as superconducting circuits and trapped ions, the bosonic degree of freedom is controlled by an ancillary qubit whose decay during a qubit-oscillator gate propagates to the oscillator as a continuous error. Such errors generally lie beyond the scope of errors that the bosonic code is capable of correcting. We introduce the continuous-variable flag: an auxiliary oscillator coupled to the ancilla whose phase-space position encodes the continuous error corrupting the storage mode. After the gate, a heterodyne measurement of the flag estimates this continuous-variable error and a subsequent feedback control undoes it up to a bosonic code stabilizer. The scheme requires no new ingredients, as the flag is driven by the same dispersive coupling, displacements and rotations that implement the gates it is supposed to protect. We construct sequences protecting conditional rotations to all orders in ancilla decay with one flag, and conditional displacements to first order with one flag and to all orders with two. Simulations with realistic circuit-QED parameters predict more than three orders of magnitude fewer logical errors for the parity measurement of a four-component cat code, and a finite-energy GKP logical lifetime near its noiseless-ancilla bound. By discretizing continuous-variable errors, the flags introduced in this work are a useful tool for any hybrid oscillator-qubit processor, and open the route towards fault-tolerant simulation and computation with bosonic modes.
Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. In this work, we develop a new autonomous quantum error correction scheme that actively corrects single-photon loss and passively suppresses low-frequency dephasing, and we demonstrate an important experimental step towards its full implementation with transmons. Compared to uncorrected encoding, improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient autonomous quantum error correction to enhance the reliability of a transmon-based quantum information processor.
Abstract To build a universal quantum computer from fragile physical qubits, effective implementation of quantum error correction (QEC)1 is an essential requirement and a central challenge. Existing demonstrations of QEC are based on an active schedule of error-syndrome measurements and adaptive recovery operations2, 3, 4, 5, 6, 7 that are hardware intensive and prone to introducing and propagating errors. In principle, QEC can be realized autonomously and continuously by tailoring dissipation within the quantum system1, 8, 9, 10, 11, 12, 13, 14, but so far it has remained challenging to achieve the specific form of dissipation required to counter the most prominent errors in a physical platform. Here we encode a logical qubit in Schrödinger cat-like multiphoton states15 of a superconducting cavity, and demonstrate a corrective dissipation process that stabilizes an error-syndrome operator: the photon number parity. Implemented with continuous-wave control fields only, this passive protocol protects the quantum information by autonomously correcting single-photon-loss errors and boosts the coherence time of the bosonic qubit by over a factor of two. Notably, QEC is realized in a modest hardware setup with neither high-fidelity readout nor fast digital feedback, in contrast to the technological sophistication required for prior QEC demonstrations. Compatible with additional phase-stabilization and fault-tolerant techniques16, 17, 18, our experiment suggests quantum dissipation engineering as a resource-efficient alternative or supplement to active QEC in future quantum computing architectures.
We introduce a framework for simulating hybrid oscillator-qubit quantum processors on qubit-only systems through position encoding. By encoding continuous-variable position and momentum wave functions into qubit amplitudes, our method efficiently simulates all Gaussian and conditional Gaussian operations -- encompassing the phase-space instruction set (beam splitter, single-qubit rotation, conditional displacement) and extending to squeezing, conditional squeezing, conditional rotation, and conditional beam splitter -- using O(log2(Γ+log(1/ε))) qubit gates per hybrid gate, where Γ is the Fock-level bound and ε is the target precision. This polylogarithmic per-gate complexity represents an exponential improvement over Fock basis encoding approaches, which require exponential quantum or classical resources in the number of qubits per mode. We provide rigorous numerical characterization of quantum Fourier transform errors for Fock-bounded states, enabling precise resource estimation for practical implementations. This work establishes that hybrid oscillator-qubit algorithms can be implemented on qubit processors with polynomial overhead, providing new insights into the computational power trade-offs between discrete-variable and hybrid continuous-discrete-variable quantum computing.