Quantum computing is expected to become a foundational technology for solving problems that exceed the capabilities of classical systems. As quantum algorithms and hardware technologies continue to advance, the need for scalable architectures becomes increasingly clear. Distributed quantum computing offers a promising path forward by interconnecting multiple smaller processors into a larger, more powerful system. However, distributed quantum computing introduces significant circuit depth overhead, as logical operations are typically decomposed into sequential physical procedures that require entanglement generation. These sequential operations limit the reliability of quantum algorithms in the NISQ era due to noise. In this work, we present a compiler that integrates logical-to-physical decomposition with depth-aware rescheduling to reduce the execution cost of distributed quantum circuits. The compiler identifies sequences of logical CNOT gates that share a control or target qubit, reschedules them into parallel instruction groups, and applies decompositions that allow multiple gates to be executed simultaneously using distributed shared entanglement resources. An algorithm is proposed that ensures parallelism is created when possible while keeping logical equivalence and that circuit depth is never increased. Benchmark results demonstrate that the compiler consistently reduces circuit depth for circuits containing inherently sequential CNOT structures, while leaving already-parallel circuits unchanged. These results highlight the value of combining scheduling and hardware-aware decomposition, and establish the compiler as a practical tool for improving the fidelity of distributed quantum computations.
Quantum computing is expected to become a foundational technology for solving problems that exceed the capabilities of classical systems. As quantum algorithms and hardware technologies continue to advance, the need for scalable architectures becomes increasingly clear. Distributed quantum computing offers a promising path forward by interconnecting multiple smaller processors into a larger, more powerful system. However, distributed quantum computing introduces significant circuit depth overhead, as logical operations are typically decomposed into sequential physical procedures that require entanglement generation. These sequential operations limit the reliability of quantum algorithms in the NISQ era due to noise. In this work, we present a compiler that integrates logical-to-physical decomposition with depth-aware rescheduling to reduce the execution cost of distributed quantum circuits. The compiler identifies sequences of logical CNOT gates that share a control or target qubit, reschedules them into parallel instruction groups, and applies decompositions that allow multiple gates to be executed simultaneously using distributed shared entanglement resources. An algorithm is proposed that ensures parallelism is created when possible while keeping logical equivalence and that circuit depth is never increased. Benchmark results demonstrate that the compiler consistently reduces circuit depth for circuits containing inherently sequential CNOT structures, while leaving already-parallel circuits unchanged. These results highlight the value of combining scheduling and hardware-aware decomposition, and establish the compiler as a practical tool for improving the fidelity of distributed quantum computations.
Optimizing quantum circuits by reducing circuit depth is essential for improving the efficiency and scalability of quantum algorithms, particularly as quantum hardware continues to evolve. This can be achieved by restructuring quantum algorithms to allow more parallelism. A compiler is needed to automatically detect and apply these optimizations. In this work, we focus on the optimization of two fundamental quantum subroutines: GHZ state creation and CNOT/CZ chain decomposition. Traditional implementations of these subroutines suffer from linearly increasing circuit depth, which limits scalability. We propose a compiler-driven approach that automatically detects and optimizes these two fundamental quantum subroutines. Our approach reduces circuit depth through constant-depth GHZ state creation, constant depth CZ chain decomposition, and logarithmic depth recursive CNOT chain decomposition, which enhance parallel execution. Performance analysis of benchmarked algorithms shows significant reductions in depth. However, our solution also results in an increased gate count, which makes our optimization a trade-off. The gate count for the CNOT chains is doubled, where logarithmic depth reduction is achieved. The reduced circuit depth results in more efficient algorithms by reducing execution time.
To overcome the physical limitations of scaling monolithic quantum computers, distributed quantum computing (DQC) interconnects multiple smaller-scale quantum processing units (QPUs) to form a quantum network. However, this approach introduces a critical challenge, namely the high cost of quantum communication between remote QPUs incurred by quantum state teleportation and quantum gate teleportation. To minimize this communication overhead, DQC compilers must strategically partition quantum circuits by mapping logical qubits to distributed physical QPUs. Static graph partitioning methods are fundamentally ill-equipped for this task as they ignore execution dynamics and underlying network topology, while metaheuristics require substantial computational runtime. In this work, we propose a heuristic based on beam search to solve the circuit partitioning problem. Our time-aware algorithm incrementally constructs a low-cost sequence of qubit assignments across successive time steps to minimize overall communication overhead. The time and space complexities of the proposed algorithm scale quadratically with the number of qubits and linearly with circuit depth, offering a significant computational speedup over common metaheuristics. We demonstrate that our proposed algorithm consistently achieves significantly lower communication costs than static baselines across varying circuit sizes, depths, and network topologies, providing an efficient compilation tool for near-term distributed quantum hardware.
Advances in quantum algorithms as well as in control hardware designs are continuously being made. These quantum algorithms, expressed as quantum circuits, need to be translated to a set of instructions from a defined quantum instruction-set architecture (ISA), which are executed by the control hardware. These translations can be done by a compiler, targeting different qubit technologies. Specifically for diamond NV centers, no compiler exists to perform this translation. Therefore, in this paper we present a compiler designed for quantum computers utilizing diamond NV center specific instructions, such as direct carbon control and partial swaps, to reduce execution times and gate count. Additionally, our compiler adds on top of general compilers by allowing classical instructions to perform state tomography and measurement-based operations. The output of the compiler is tested in a diamond NV center specific simulator. Comparing a general compiler output with the diamond NV center specific output of our compiler while applying decoherence and depolarization noise showed reduced noise effects due to diamond specific decomposition. The compiler was also tested to perform state tomography and measurement-based operations, which showed to be functional. Our results show that we have successfully created a compiler with integrated classical and quantum instructions support, which can improve circuit execution fidelity by utilizing diamond specific optimizations.
Scalable quantum computing requires execution models that go beyond the capacity of a single quantum processing unit (QPU). Although current hardware platforms continue to increase in qubit count, large fault-tolerant applications require substantially more physical qubits, stronger connectivity, and lower effective error rates than a monolithic near-term device can provide. Multi-QPU and multi-core architectures therefore form an important route towards larger quantum systems. However, distributing a quantum computation introduces compiler and architecture constraints that do not arise in conventional classical distribution. A partitioned quantum circuit separates gates and qubits that may still be logically entangled or mutually dependent. The system must therefore provide quantum resources that support entanglement between the distributed circuit fragments, while each local subcircuit must remain executable on the hardware topology of its assigned QPU. In this thesis, graph states serve as the explicit interconnection resources for these nonlocal dependences: they encode the entanglement structure required to support teleportation-based operations across QPUs. This thesis studies scalable quantum execution as an architecture-driven compilation problem. It develops a staged framework in which distribution, graph-state-based interconnection, and interconnection robustness are treated as dependent compiler decisions. The framework addresses three connected questions: 1) how a large quantum circuit should be divided when the resulting subcircuits must match real QPU topologies; 2) how the graph states required to entangle and operate across the distributed circuit boundaries can be prepared efficiently on constrained hardware; and 3) how those graph-state resources can remain useful under the loss and fusion failures that arise during preparation and use. These questions define an execution path from a large logical circuit to distributed local workloads connected by explicit entanglement resources. The thesis makes three main technical contributions that instantiate this framework. 1) It introduces hardware-aware circuit cutting, which incorporates the relationship between subcircuit interaction graphs and target QPU topology into the partitioning objective. This stage produces distributed workloads and explicit cut boundaries where quantum entanglement must be supplied across QPUs. 2) It formulates graph-state preparation as the resource-generation stage for those boundaries and develops methods that reduce preparation depth and emitter usage by exploiting graph-state equivalence and divide-and-conquer construction. 3) It develops a robust graph-state interconnection scheme that uses tree-encoded fusion and spin-memory-assisted compilation to tolerate photon loss and probabilistic fusion failures, so that the graph state can serve as a reliable connection between distributed quantum program fragments.
As quantum computers continue to improve and support larger, more complex computations, smart control hardware and compilers are needed to efficiently leverage the capabilities of these systems.
This paper introduces a novel approach to enhance the execution of quantum algorithms on distributed quantum systems. The proposed method involves the development of a hardware design that supports parallel instruction execution and a compiler that modifies the order of instructions to increase parallelism opportunities. The hardware design can be flexibly configured to facilitate parallel execution of instructions that have identical parameters. Furthermore, the compiler uses the underlying hardware constraints to intelligently reorder and decompose instructions to avoid dependencies.
The compiler, hardware, and their combination are evaluated using a runtime calculator and a benchmark quantum algorithm set. The results demonstrate a significant speedup, achieving a maximum average speedup of 16.5x and a maximum single-benchmark speedup of 56.2x relative to a baseline, serial execution model. Furthermore, we show a speedup can be obtained across all benchmarks using any of the proposed hardware schemes, although the degree of speedup is largely dependent on the type of quantum algorithm. Taken together, the results of this paper represent a significant step towards realizing high-performance quantum computing systems.
Parallel computation enables multiple processors to execute different parts of a task simultaneously, improving processing speed and efficiency. In quantum computing, parallel gate implementation involves executing gates independently in different registers, directly impacting the circuit depth, the number of sequential quantum gate operations, and thus the algorithm execution time. This work examines a method for reducing circuit depth by introducing auxiliary qubits to enable parallel gate execution, potentially enhancing the performance of quantum simulations on near-term quantum devices. We show that any circuit on n qubits with depth O(Mn2), where M=M(n) is some function of n, can be transformed into a circuit with depth O(log2(M)n2) operating on O(Mn) qubits. This technique may be particularly useful in noisy environments, where recent findings indicate that only the final O(logn) layers influence the expectation value of observables. It may also optimize Trotterization by exponentially reducing the number of Trotter steps. Additionally, the method may offer advantages for distributed quantum computing, and the intuition of treating quantum states as gates and operators as vectors used in this work may have broader applications in quantum computation.