Trapped atomic ion qubits exhibit long coherence times and high fidelity qubit state preparation, manipulation and detection, making them well-suited for scalable quantum computing applications. Among several atomic species used in quantum computing and other application, singly-charged ions of barium stand out due to their long wavelength transitions and the presence of very long-lived metastable internal states. However, elemental barium is a highly reactive metal making it experimentally difficult to work with when making atomic beam sources. In this paper, we demonstrate a method of using resistively heated ovens loaded with a barium magnesium alloy (BaMg) as a source of barium for ion traps. This alloy is not very chemically reactive and does not oxidize in air. We found that a sample of BaMg in a resistively heated oven produced barium vapor pressures on the same order as a metallic barium sample prepared the same way. Two separate ovens, one with a sample of BaMg and one with metallic barium, were used as source for an ion trap. We observed reliable trapping of 138Ba+ ions both with the elemental barium source, and the BaMg source.
Trapped atomic ion qubits exhibit long coherence times and high fidelity in qubit state preparation, manipulation, and detection, making them well-suited for scalable quantum computing applications. Among several atomic species used in quantum computing and other applications, singly charged ions of barium stand out due to their long wavelength transitions and the presence of very long-lived metastable internal states. However, elemental barium is a highly reactive metal, making it experimentally difficult to work with when making atomic beam sources. In this paper, we demonstrate a method of using resistively heated ovens loaded with a barium magnesium alloy (BaMg) as a source of barium for ion traps. This alloy is not very chemically reactive and does not oxidize in air. We found that a sample of BaMg in a resistively heated oven produced barium vapor pressures on the same order as a metallic barium sample prepared the same way. Two separate ovens, one with a sample of BaMg and one with metallic barium, were used as sources for an ion trap. We observed reliable trapping of 138Ba+ ions both with the elemental barium source and the BaMg source.
The
133Ba+ ion is a promising candidate as a high-fidelity qubit, and the
137Ba+ isotope is promising as a high-fidelity qudit
(d>2). Barium metal is very reactive, and
133Ba+ is radioactive and can only be sourced in small quantities, so the most commonly used loading method, oven heating, is less suited for barium and is currently not possible for
133Ba+. Pulsed laser ablation solves both of these problems by utilizing compound barium sources while also giving some distinct advantages, such as fast loading, less displaced material, and lower heat load near the ion trap. Because of the relatively low abundances of the isotopes of interest, a two-step photoionization technique is used, which gives us the ability to selectively load isotopes. Characterization of the ablation process for our
BaCl2 targets are presented, including observation of neutral and ion ablation-fluence regimes, preparation and conditioning, lifetimes of ablation spots, and plume velocity distributions. We show that by using laser ablation on
BaCl2 salt targets with a two-step photoionization method, we can produce and trap barium ions reliably. Furthermore, we demonstrate that with our photoionization method, we can trap
137Ba+ with an enhanced selectivity compared to its natural abundance.
Atomic ions can be isolated from their environment through laser-cooling and trapping, making them useful for quantum information processing, measurement, and sensing. A variety of atomic ion species have been used as qubits. Hyperfine qubits with nuclear spin I = 1/2 have demonstrated the long qubit coherence times with simple, robust laser manipulation. Other qubits (I ≠ 1/2) have easily-prepared, long-lived metastable electronic excited states, and simple discrimination between these states allows high fidelity readout. However, none of the naturally- occurring, atomic ions with nuclear spin I = 1/2 have these excited states that are simultaneously long-lived and easy to prepare. We demonstrate loading, cooling, and qubit manipulation of an artificial, I = 1/2 species of barium with visible wavelength lasers: 133Ba+. We achieved a single shot qubit state preparation and readout fidelity of F = 0.9997, the lowest error rate ever achieved by any qubit on any platform.
Trapped ions for quantum information processing have been an area of intense study due to the extraordinarily high fidelity operations that have been reported experimentally. Specifically, barium trapped ions have been shown to have exceptional state-preparation and measurement fidelities. The 133Ba+ (I = 1/2) isotope in particular is a promising candidate for large-scale quantum computing experiments. However, a major pitfall with this isotope is that it is radioactive and is thus generally used in microgram quantities to satisfy safety regulations. We describe a new method for creating microgram barium chloride (BaCl2) ablation targets for use in trapped ion experiments and compare our procedure to previous methods. We outline two recipes for the fabrication of ablation targets that increase the production of neutral atoms for isotope-selective loading of barium ions. We show that heat-treatment of the ablation targets greatly increases the consistency at which neutral atoms can be produced, and we characterize the uniformity of these targets using trap-independent techniques such as energy dispersive x-ray spectroscopy and neutral fluorescence collection. Our comparison between fabrication techniques and the demonstration of consistent neutral fluorescence paves a path toward reliable loading of 133Ba+ in surface traps and opens opportunities for scalable quantum computing with this isotope.
Trapped ions for quantum information processing has been an area of intense study due to the extraordinarily high fidelity operations that have been reported experimentally. Specifically, barium trapped ions have been shown to have exceptional state-preparation and measurement (SPAM) fidelities. The
133Ba+ (
I=1/2) isotope in particular is a promising candidate for large-scale quantum computing experiments. However, a major pitfall with this isotope is that it is radioactive and is thus generally used in microgram quantities to satisfy safety regulations. We describe a new method for creating microgram barium chloride (
BaCl2) ablation targets for use in trapped ion experiments and compare our procedure to previous methods. We outline two recipes for fabrication of ablation targets that increase the production of neutral atoms for isotope-selective loading of barium ions. We show that heat-treatment of the ablation targets greatly increases the consistency at which neutral atoms can be produced and we characterize the uniformity of these targets using trap-independent techniques such as energy dispersive x-ray spectroscopy (EDS) and neutral fluorescence collection. Our comparison between fabrication techniques and demonstration of consistent neutral fluorescence paves a path towards reliable loading of
133Ba+ in surface traps and opens opportunities for scalable quantum computing with this isotope.
Trapped-ion quantum information processing may benefit from qubits encoded in isotopes that are practically available in only small quantities, e.g., due to low natural abundance or radioactivity. Laser ablation provides a method of controllably liberating neutral atoms or ions from low-volume targets, but energetic ablation products can be difficult to confine in the small ion-electrode distance, micron-scale microfabricated traps amenable to high-speed, high-fidelity manipulation of ion arrays. Here, we investigate ablation-based ion loading into surface-electrode traps of different sizes to test a model describing ion loading probability as a function of effective trap volume and other trap parameters. We characterize loading of ablated barium from a metallic source in two cryogenic surface-electrode traps with 730 and 50 μm ion-electrode distances. Our loading rate agrees with a predictive analytical model, providing insight for the confinement of limited-quantity species of interest for quantum computing, simulation, and sensing.