Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.12436

Doppler-induced tunable and shape-preserving frequency conversion of microwave wave packets

Felix Ahrens, Enrico Bogoni, Renato Mezzena, Andrea Vinante, Nicolò Crescini, Alessandro Irace, Andrea Giachero, Gianluca Rastelli, Iacopo Carusotto, Federica Mantegazzini

quant-phcond-mat.mes-hallphysics.opticsSubmitted Mar 12, 2026• Announced Mar 16, 2026• 0 citations• Revised May 11, 2026 (v2)
v1 · Mar 12, 2026v2 · May 11, 2026
arXivHTMLPDF

Abstract

In superconducting electronics, the ability to control the frequency of microwave wave packets is crucial for several applications, such as the operation of superconducting quantum processors and the readout of superconducting sensors. We introduce a new approach to microwave frequency conversion that harnesses a dynamic Doppler effect induced by a propagating front that separates regions of different phase velocities. Employing a high-kinetic-inductance superconducting transmission line in a travelling-wave geometry, we were able to implement frequency shifts of microwave wave packets at 500$\,$MHz and 4$\,$GHz of up to 3.7$\,$% while fully preserving their temporal shape. In contrast to conventional methods based on frequency-mixing, our Doppler-induced frequency-conversion method avoids spurious mixing products, is continuously tunable by a quasi-dc current amplitude, and allows to imprint arbitrary patterns on the instantaneous frequency profile of temporally long wave packets. By engineering transmission lines that allow for larger phase-velocity changes and/or by cascading multiple Doppler-induced frequency conversions, an unlimited amount of frequency shifting is in principle attainable. These features demonstrate the potential of our frequency-conversion technique as a promising tool for advanced control of microwave wave packets for different quantum applications.

Related papers

Broad-spectrum coherent frequency conversion with kinetic inductance superconducting metastructures

Yufeng Wu, Chaofan Wang, Danqing Wang +3 more

Parametric frequency converters (PFCs) play a critical role in bridging the frequency gap between quantum information carriers. PFCs in the microwave band are particularly important for superconducting quantum processors, but their operating bandwidth is often strongly limited. Here, we present a multimode kinetic metastructure for parametric frequency conversion between broadly spanning frequency modes. This device comprises a chain of asymmetric kinetic inductance grids designed to deliver efficient three-wave mixing nonlinearity. We demonstrate high efficient coherent conversion among broadly distributed modes, and the mode frequency is continuously tunable by controlling the external magnetic field strength, making it ideally suited for quantum computing and communication applications requiring flexible and efficient frequency conversion.

arXiv:2503.09054•Physical Review Applied•Jun 9, 2025•4 citations

Generation of Frequency-Tunable Shaped Single Microwave Photons Using a Fixed-Frequency Superconducting Qubit

Takeaki Miyamura, Yoshiki Sunada, Zhiling Wang +3 more

Scaling up a superconducting quantum computer will likely require quantum communication between remote chips, which can be implemented using an itinerant microwave photon in a transmission line. To realize high-fidelity communication, it is essential to control the frequency and temporal shape of the microwave photon. In this work, we demonstrate the generation of frequency-tunable shaped microwave photons without resorting to any frequency-tunable circuit element. We develop a framework that treats a microwave resonator as a band-pass filter mediating the interaction between a superconducting qubit and the modes in the transmission line. This interpretation allows us to stimulate the photon emission by an off-resonant drive signal. We characterize how the frequency and temporal shape of the generated photon depends on the frequency and amplitude of the drive signal. By modulating the drive amplitude and frequency, we achieve a frequency tunability of 40 MHz while maintaining the photon mode shape time symmetric. Through measurements of the quadrature amplitudes of the emitted photons, we demonstrate a consistently high state and process fidelities around 95% across the tunable frequency range. Our hardware-efficient approach eliminates the need for additional biasing lines typically required for frequency tuning, offering a simplified architecture for scalable quantum communication.

arXiv:2503.05536•PRX Quantum•Jun 9, 2025•5 citations

The distributed Josephson inductance phase shifter

D.J. Durand, J. Carpenter, E. Ladizinsky +4 more

The authors report on a novel microwave phase shifter featuring rapid electronic adjustment, continuous phase control true time delay operation, high device fault tolerance, and very broadband operation. By coupling a large number of superconducting quantum interference devices (SQUIDs) to a superconducting microstrip transmission line, a variable magnetic medium in which the wave velocity is controlled electronically is created. The authors have measured 60 degrees phase shift at 10 GHz, and wideband operation from 5 to 15 GHz for an 8-cm-long Nb transmission line coupled to 1600 SQUIDs, each containing a single Nb/AlO/sub x//Nb tunnel junction. The observed phase shift corresponds to a change in wave velocity of about 1 part in 60.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1992•25 citations

Broadband tunable phase shifter for microwaves

Jinli Zhang, Tianyi Li, Roope Kokkoniemi +8 more

We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, |S21| = 1, can be theoretically achieved along a curve where the phase shift is controllable by the magnetic flux. The fabricated device consists of three equidistant SQUIDs interrupting a transmission line. We model each SQUID embedded at different positions along the transmission line with two parameters, capacitance and inductance, the values of which we extract from the experiments. In our experiments, the tunability of the phase shift varies from 0.07 × π to 0.14 × π radians along the full-transmission curve with the input frequency ranging from 6.00 GHz to 6.28 GHz. The reported measurements are in good agreement with simulations, which is promising for future design work of phase shifters for different applications.

arXiv:2003.01356•AIP Advances•Jun 1, 2020•7 citations

Cryogenic microwave mixing and phase control in superconducting quantum paraelectric resonator

H. Sundaresan, Prasad Muragesh, Madhu Thalakulam

Scaling quantum processors requires cryogenic microwave components to minimize thermal load and wiring complexity. However, conventional microwave components such as mixers and phase shifters perform poorly at millikelvin temperatures. Here, we report an SrTiO 3 (STO)-based microwave frequency mixer and phase shifter operating at sub-Kelvin temperatures. Utilizing the effective χ (2) nonlinearity of STO in the quantum paraelectric state, induced by a static or oscillating field, we achieve efficient microwave frequency mixing. Our device features an aluminum superconducting coplanar waveguide resonator on STO, which resonantly enhances mixing characteristics. The exceptionally high field-tunable dielectric constant of STO—approximately 30,000—allows for highly compact architectures and facilitates voltage-controlled phase shifting. Furthermore, we demonstrate multi-tone frequency mixing via phase modulation, facilitating spectral filtering and shaping. These STO-based devices provide a transformative approach to the generation of intricate microwave waveforms, tailoring control and readout signals in multi-qubit systems and paving the way for co-located quantum-classical integration.

Cell Reports Physical Science•Jun 10, 2026•0 citations

Flux-coupled tunable superconducting resonator

Juliang Li, Peter S. Barry, Tom Cecil +6 more

We present a design and implementation of a frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC loop to a current-biased feedline; the resulting screening current leads to a change of the kinetic inductance and shift in the resonance frequency. The thin-film aluminum resonator consists of an interdigitated capacitor and thin line inductors forming a closed superconducting loop. The magnetic flux from the nearby niobium current feedline induces Meissner shielding currents in the resonator loop leading to a change in the kinetic part of the total inductance of the resonator. We demonstrate continuous frequency tuning within 160 MHz around the resonant frequency of 2.7 GHz. We show that: (1) frequency up-conversion is achieved when a kilohertz ac modulation signal is superimposed onto the dc bias resulting in sidebands to the resonator tone; (2) three-wave mixing is attained by parametrically pumping the nonlinear kinetic inductance using a strong rf pump signal in the feedline. The simple architecture is amenable to large-array multiplexing and on-chip integration with other circuit components. The concept could be applied in flux magnetometers, up-converters, and parametric amplifiers operating above 4 K when alternative high-critical-temperature material with high kinetic inductance is used.

arXiv:2312.12755•Physical Review Applied•Jul 30, 2024•9 citations
In superconducting electronics, the ability to control the frequency of microwave wave packets is crucial for several applications, such as the operation of superconducting quantum processors and the readout of superconducting sensors. We introduce a new approach to microwave frequency conversion that harnesses a dynamic Doppler effect induced by a propagating front that separates regions of different phase velocities. Employing a high-kinetic-inductance superconducting transmission line in a travelling-wave geometry, we were able to implement frequency shifts of microwave wave packets at 500 \,MHz and 4 \,GHz of up to 3.7 \,% while fully preserving their temporal shape. In contrast to conventional methods based on frequency-mixing, our Doppler-induced frequency-conversion method avoids spurious mixing products, is continuously tunable by a quasi-dc current amplitude, and allows to imprint arbitrary patterns on the instantaneous frequency profile of temporally long wave packets. By engineering transmission lines that allow for larger phase-velocity changes and/or by cascading multiple Doppler-induced frequency conversions, an unlimited amount of frequency shifting is in principle attainable. These features demonstrate the potential of our frequency-conversion technique as a promising tool for advanced control of microwave wave packets for different quantum applications.
Parametric frequency converters (PFCs) play a critical role in bridging the frequency gap between quantum information carriers. PFCs in the microwave band are particularly important for superconducting quantum processors, but their operating bandwidth is often strongly limited. Here, we present a multimode kinetic metastructure for parametric frequency conversion between broadly spanning frequency modes. This device comprises a chain of asymmetric kinetic inductance grids designed to deliver efficient three-wave mixing nonlinearity. We demonstrate high efficient coherent conversion among broadly distributed modes, and the mode frequency is continuously tunable by controlling the external magnetic field strength, making it ideally suited for quantum computing and communication applications requiring flexible and efficient frequency conversion.
Scaling up a superconducting quantum computer will likely require quantum communication between remote chips, which can be implemented using an itinerant microwave photon in a transmission line. To realize high-fidelity communication, it is essential to control the frequency and temporal shape of the microwave photon. In this work, we demonstrate the generation of frequency-tunable shaped microwave photons without resorting to any frequency-tunable circuit element. We develop a framework that treats a microwave resonator as a band-pass filter mediating the interaction between a superconducting qubit and the modes in the transmission line. This interpretation allows us to stimulate the photon emission by an off-resonant drive signal. We characterize how the frequency and temporal shape of the generated photon depends on the frequency and amplitude of the drive signal. By modulating the drive amplitude and frequency, we achieve a frequency tunability of 40 MHz while maintaining the photon mode shape time symmetric. Through measurements of the quadrature amplitudes of the emitted photons, we demonstrate a consistently high state and process fidelities around 95% across the tunable frequency range. Our hardware-efficient approach eliminates the need for additional biasing lines typically required for frequency tuning, offering a simplified architecture for scalable quantum communication.
The authors report on a novel microwave phase shifter featuring rapid electronic adjustment, continuous phase control true time delay operation, high device fault tolerance, and very broadband operation. By coupling a large number of superconducting quantum interference devices (SQUIDs) to a superconducting microstrip transmission line, a variable magnetic medium in which the wave velocity is controlled electronically is created. The authors have measured 60 degrees phase shift at 10 GHz, and wideband operation from 5 to 15 GHz for an 8-cm-long Nb transmission line coupled to 1600 SQUIDs, each containing a single Nb/AlO/sub x//Nb tunnel junction. The observed phase shift corresponds to a change in wave velocity of about 1 part in 60.>
We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, |S21| = 1, can be theoretically achieved along a curve where the phase shift is controllable by the magnetic flux. The fabricated device consists of three equidistant SQUIDs interrupting a transmission line. We model each SQUID embedded at different positions along the transmission line with two parameters, capacitance and inductance, the values of which we extract from the experiments. In our experiments, the tunability of the phase shift varies from 0.07 × π to 0.14 × π radians along the full-transmission curve with the input frequency ranging from 6.00 GHz to 6.28 GHz. The reported measurements are in good agreement with simulations, which is promising for future design work of phase shifters for different applications.
Scaling quantum processors requires cryogenic microwave components to minimize thermal load and wiring complexity. However, conventional microwave components such as mixers and phase shifters perform poorly at millikelvin temperatures. Here, we report an SrTiO 3 (STO)-based microwave frequency mixer and phase shifter operating at sub-Kelvin temperatures. Utilizing the effective χ (2) nonlinearity of STO in the quantum paraelectric state, induced by a static or oscillating field, we achieve efficient microwave frequency mixing. Our device features an aluminum superconducting coplanar waveguide resonator on STO, which resonantly enhances mixing characteristics. The exceptionally high field-tunable dielectric constant of STO—approximately 30,000—allows for highly compact architectures and facilitates voltage-controlled phase shifting. Furthermore, we demonstrate multi-tone frequency mixing via phase modulation, facilitating spectral filtering and shaping. These STO-based devices provide a transformative approach to the generation of intricate microwave waveforms, tailoring control and readout signals in multi-qubit systems and paving the way for co-located quantum-classical integration.
We present a design and implementation of a frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC loop to a current-biased feedline; the resulting screening current leads to a change of the kinetic inductance and shift in the resonance frequency. The thin-film aluminum resonator consists of an interdigitated capacitor and thin line inductors forming a closed superconducting loop. The magnetic flux from the nearby niobium current feedline induces Meissner shielding currents in the resonator loop leading to a change in the kinetic part of the total inductance of the resonator. We demonstrate continuous frequency tuning within 160 MHz around the resonant frequency of 2.7 GHz. We show that: (1) frequency up-conversion is achieved when a kilohertz ac modulation signal is superimposed onto the dc bias resulting in sidebands to the resonator tone; (2) three-wave mixing is attained by parametrically pumping the nonlinear kinetic inductance using a strong rf pump signal in the feedline. The simple architecture is amenable to large-array multiplexing and on-chip integration with other circuit components. The concept could be applied in flux magnetometers, up-converters, and parametric amplifiers operating above 4 K when alternative high-critical-temperature material with high kinetic inductance is used.