In modern wireless networks, radio channels serve a dual role. Whilst their primary function is to carry bits of information from a transmitter to a receiver, the intrinsic sensitivity of transmitted signals to the physical structure of the environment makes the channel a powerful source of knowledge about the world. In this paper, we consider an agent that learns about its environment using a quantum sensing probe, optimised using a quantum circuit, which interacts with the radio-frequency (RF) electromagnetic field. We use data obtained from a ray-tracer to train the quantum circuit and learning model and we provide extensive experiments under realistic conditions on a localisation task. We show that using quantum sensors to learn from radio signals can enable intelligent systems that require no channel measurements at deployment, remain sensitive to weak and obstructed RF signals, and can learn about the world despite operating with strictly less information than classical baselines.
In modern wireless networks, radio channels serve a dual role. Whilst their primary function is to carry bits of information from a transmitter to a receiver, the intrinsic sensitivity of transmitted signals to the physical structure of the environment makes the channel a powerful source of knowledge about the world. In this paper, we consider an agent that learns about its environment using a quantum sensing probe, optimised using a quantum circuit, which interacts with the radio-frequency (RF) electromagnetic field. We use data obtained from a ray-tracer to train the quantum circuit and learning model and we provide extensive experiments under realistic conditions on a localisation task. We show that using quantum sensors to learn from radio signals can enable intelligent systems that require no channel measurements at deployment, remain sensitive to weak and obstructed RF signals, and can learn about the world despite operating with strictly less information than classical baselines.
Abstract In modern wireless networks, radio channels serve a dual role. Whilst their primary function is to carry bits of information from a transmitter to a receiver, the intrinsic sensitivity of transmitted signals to the physical structure of the environment makes the channel a powerful source of knowledge about the world. In this paper, we consider an agent that learns about its environment using a quantum sensing probe, optimised using a quantum circuit, which interacts with the radio-frequency (RF) electromagnetic field. We use data obtained from a ray-tracer to train the quantum circuit and learning model and we provide extensive experiments under realistic conditions on a localisation task. We show that using quantum sensors to learn from radio signals can enable intelligent systems that require no channel measurements at deployment, remain sensitive to weak and obstructed RF signals, and can learn about the world despite operating with strictly less information than classical baselines.
Abstract The emergence of quantum sensor networks has presented opportunities for enhancing complex sensing tasks, while simultaneously introducing significant challenges in designing and analyzing quantum sensing protocols due to the intricate nature of entanglement and physical processes. Supervised learning assisted by an entangled sensor network (SLAEN) (Zhuang and Zhang 2019Phys. Rev.X9041023) represents a promising paradigm for automating sensor-network design through variational quantum machine learning. However, the original SLAEN, constrained by the Gaussian nature of quantum circuits, is limited to learning linearly separable data. Leveraging the universal quantum control available in cavity quantum electrodynamics experiments, we propose a generalized SLAEN capable of handling nonlinear data classification tasks. We establish a theoretical framework for physical-layer data classification to underpin our approach. Through training quantum probes and measurements, we uncover a threshold phenomenon in classification error across various tasks—when the energy of probes exceeds a certain threshold, the error drastically diminishes to zero, providing a significant improvement over the Gaussian SLAEN. Despite the non-Gaussian nature of the problem, we offer analytical insights into determining the threshold and residual error in the presence of noise. Our findings carry implications for radio-frequency photonic sensors and microwave dark matter haloscopes.
Quantum sensing harnesses the unique properties of quantum systems to enable precision measurements of physical quantities such as time, magnetic and electric fields, acceleration, and gravitational gradients well beyond the limits of classical sensors. However, identifying suitable sensing probes and measurement schemes can be a classically intractable task, as it requires optimizing over Hilbert spaces of high dimension. In variational quantum sensing, a probe quantum system is generated via a parameterized quantum circuit (PQC), exposed to an unknown physical parameter through a quantum channel, and measured to collect classical data. PQCs and measurements are typically optimized using offline strategies based on frequentist learning criteria. This paper introduces an adaptive protocol that uses Bayesian inference to optimize the sensing policy via the maximization of the active information gain. The proposed variational methodology is tailored for non-asymptotic regimes where a single probe can be deployed in each time step, and is extended to support the fusion of estimates from multiple quantum sensing agents.
Electromagnetic warfare (EW) refers to military operations exploiting the electromagnetic spectrum, and includes transmitting and receiving information encoded in electromagnetic fields. In order to interpret such information, effective sensing systems are of great importance. For EW applications, the radio frequency (RF) spectrum is specifically relevant. Traditional RF receivers and transmitters rely on antennas and associated electronic components, whose performance is fundamentally limited by constraints imposed by the laws of classical physics. Motivated by the fundamental limitations of classical technologies, quantum technology has emerged as a strategic research area in many countries, with applications in computing, communication and sensing, and could therefore be useful in EW applications in the future. This thesis aims to investigate and compare two quantum sensing approaches: Rydberg atombased electric field sensors and nitrogen-vacancy center magnetometers. The goal is to evaluate their sensing principles, fundamental limitations and potential competitiveness compared to classical RF receivers. The work combines a literature review of published research in order to understand the underlying quantum mechanical principles enabling electromagnetic field sensing, with analytical comparisons of sensitivity and detection range. Classical receiver performance was modeled using thermal-noise-limited sensitivity, while quantum sensor performance was estimated using reported sensitivities from literature. Detection range calculations were performed under simplified assumptions to illustrate the differences between conventional and atom-based sensing approaches. The results show that current quantum sensors do not yet surpass state-of-the-art classical receivers in raw sensitivity. However, they offer several unique characteristics, including intrinsic calibration, wide frequency tunability and the possibility of direct field-based measurements without conventional impedance matching. The comparison further highlights the fundamentally different noise mechanisms governing classical and quantum sensing systems. Overall, quantum sensing represents a promising emerging technology for electromagnetic field detection. Although significant technical challenges remain, continued advances may enable future quantum sensors to complement or partially replace conventional RF sensing technologies.
Wireless communication systems face increasing challenges in resource allocation, latency reduction, scalability, and adaptation because modern networks generate high-dimensional, nonlinear, and rapidly changing data. This work presents a hybrid Quantum Neural Network (QNN)-driven framework for intelligent resource optimization in dynamic wireless communication environments. The proposed framework integrates variational quantum circuits with classical optimization techniques to support adaptive learning and efficient decision-making. A modular architecture consisting of User, Database, and Operator modules enables secure data acquisition, storage, preprocessing, continuous model training, and operator-driven optimization. Quantum Neural Networks are employed as the primary learning mechanism, while hybrid quantum-classical optimization supports stable parameter training. Quantum annealing is incorporated for complex tasks such as channel allocation, bandwidth management, and resource scheduling. The framework is designed to improve allocation accuracy, reduce latency, enhance scalability, reliability, security, and resource utilization. Continuous learning further enables adaptation to changing traffic patterns, user requirements, workloads, and network conditions. Keywords: Quantum Neural Network, Wireless Communication, Resource Optimization, Quantum Computing, Hybrid Quantum-Classical Learning, Resource Allocation.
Quantum metrology takes advantage of nonclassical resources such as squeezing and entanglement to achieve a sensitivity level below the standard quantum limit (SQL). To date, most demonstrations of quantum sensing are restricted to a single sensor, nevertheless, many sensing tasks rely on an array of sensors working collectively. The measurement sensitivity of separable sensors scales as 1/sqrt(M) known as the SQL where M is the number of sensors. Shared entanglement among all sensors can be harnessed to surpass the SQL. Recent theoretical advances in distributed quantum sensing have shown that multipartite entangled states give rise to an improvement of 1/sqrt(M) in measurement sensitivity over separable states when estimating a global parameter. We develop a reconfigurable entangled sensor network based on continuous variable multipartite entangled states. The demonstrated entangled sensor network is composed of three sensor nodes, each equipped with an electro-optic transducer for the detection of radio-frequency (RF) signals. By properly tailoring the entangled states through a variational quantum circuit (VQC), the entangled sensor network can be reconfigured to minimize the measurement noise by more than 3dB below the SQL in different distributed RF sensing tasks, e.g., measuring the angle of arrival and mean amplitude of incident RF waves. Such a capability of capturing global features of interrogating objects by a reconfigurable entangled sensor network with less quantum noise further creates opportunities to enable a quantum advantage in data-processing problems. VQCs in conjunction with classical processing constitutes a promising architecture for quantum simulations, classical optimization, and machine learning. We train the VQC by classical machine learning algorithms to optimize the entanglement shared by the sensors for solving practical data processing problems. We show an entanglement-enabled reduction in error probability for classification of multidimensional RF signals. Our work establishes the quantum advantage of distributed quantum sensing and would lead to applications in ultrasensitive positioning, navigation, and data processing.