Decoding Low-Density Parity-Check (LDPC) codes is a fundamental problem in coding theory, and Belief Propagation (BP) is one of the most popular methods for LDPC code decoding. However, BP may encounter convergence issues and suboptimal performance, especially for short-length codes and in high-noise channels. The Quantum Approximate Optimization Algorithm (QAOA) is a type of Variational Quantum Algorithm (VQA) designed to solve combinatorial optimization problems by minimizing a problem-specific cost function. In this paper, we present a QAOA-based decoding framework for LDPC codes by formulating a decoding cost function that incorporates both parity-check constraints and soft channel reliability information. The resulting optimization problem is solved using QAOA to search for low-energy configurations corresponding to valid codewords. We test the proposed method through extensive numerical experiments and compare its performance with BP decoding. The experimental results demonstrate that the QAOA-based decoder achieves a higher probability of correctly recovering the transmitted codeword than BP across multiple experimental settings.
Decoding Low-Density Parity-Check (LDPC) codes is a fundamental problem in coding theory, and Belief Propagation (BP) is one of the most popular methods for LDPC code decoding. However, BP may encounter convergence issues and suboptimal performance, especially for short-length codes and in high-noise channels. The Quantum Approximate Optimization Algorithm (QAOA) is a type of Variational Quantum Algorithm (VQA) designed to solve combinatorial optimization problems by minimizing a problem-specific cost function. In this paper, we present a QAOA-based decoding framework for LDPC codes by formulating a decoding cost function that incorporates both parity-check constraints and soft channel reliability information. The resulting optimization problem is solved using QAOA to search for low-energy configurations corresponding to valid codewords. We test the proposed method through extensive numerical experiments and compare its performance with BP decoding. The experimental results demonstrate that the QAOA-based decoder achieves a higher probability of correctly recovering the transmitted codeword than BP across multiple experimental settings.
Decoding low-density parity-check codes is critical in many current technologies, such as fifth-generation (5G) wireless networks and satellite communications. The belief propagation algorithm allows for fast decoding due to the low density of these codes. However, there is scope for improvement to this algorithm both in terms of its computational cost when decoding large codes and its error-correcting abilities. Here, we introduce the quantum-enhanced belief propagation (QEBP) algorithm, in which the Quantum Approximate Optimization Algorithm (QAOA) acts as a pre-processing step to belief propagation. We perform exact simulations of syndrome decoding with QAOA, whose result guides the belief propagation algorithm, leading to faster convergence and a lower block error rate (BLER). In addition, through the repetition code, we study the possibility of having shared variational parameters between syndromes and, in this case, code lengths. We obtain a unique pair of variational parameters for level-1 QAOA by optimizing the probability of successful decoding through a transfer matrix method. Then, using these parameters, we compare the scaling of different QAOA post-processing techniques with code length.
Quantum low-density parity-check (QLDPC) codes are promising candidates for error correction in quantum computers. One of the major challenges in implementing QLDPC codes in quantum computers is the lack of a universal decoder. In this work, we first propose to decode QLDPC codes with a belief propagation (BP) decoder operating on overcomplete check matrices. Then, we extend the neural BP (NBP) decoder, which was originally studied for suboptimal binary BP decoding of QLPDC codes, to quaternary BP decoders. Numerical simulation results demonstrate that both approaches as well as their combination yield a low-latency, high-performance decoder for several short to moderate length QLDPC codes.
Quantum low-density parity-check (QLDPC) codes are among the most promising candidates for future quantum error correction schemes. However, a limited number of short to moderate-length QLDPC codes have been designed and their decoding performance is sub-optimal with a quaternary belief propagation (BP) decoder due to unavoidable short cycles in their Tanner graphs. In this paper, we propose a novel joint code and decoder design for QLDPC codes. The constructed codes have a minimum distance of about the square root of the block length. In addition, it is, to the best of our knowledge, the first QLDPC code family where BP decoding is not impaired by short cycles of length 4. This is achieved by using an ensemble BP decoder mitigating the influence of assembled short cycles. We outline two code construction methods based on classical quasi-cyclic codes and finite geometry codes. Numerical results demonstrate outstanding decoding performance over depolarizing channels.
We present Quantum Belief Propagation (QBP), a Quantum Annealing (QA) based decoder design for Low Density Parity Check (LDPC) error control codes, which have found many useful applications in Wi-Fi, satellite communications, mobile cellular systems, and data storage systems. QBP reduces the LDPC decoding to a discrete optimization problem, then embeds that reduced design onto quantum annealing hardware. QBP's embedding design can support LDPC codes of block length up to 420 bits on real state-of-the-art QA hardware with 2,048 qubits. We evaluate performance on real quantum annealer hardware, performing sensitivity analyses on a variety of parameter settings. Our design achieves a bit error rate of 10--8 in 20 μs and a 1,500 byte frame error rate of 10--6 in 50 μs at SNR 9 dB over a Gaussian noise wireless channel. Further experiments measure performance over real-world wireless channels, requiring 30 μs to achieve a 1,500 byte 99.99% frame delivery rate at SNR 15-20 dB. QBP achieves a performance improvement over an FPGA based soft belief propagation LDPC decoder, by reaching a bit error rate of 10--8 and a frame error rate of 10--6 at an SNR 2.5--3.5 dB lower. In terms of limitations, QBP currently cannot realize practical protocol-sized (e.g., Wi-Fi, WiMax) LDPC codes on current QA processors. Our further studies in this work present future cost, throughput, and QA hardware trend considerations.
Due to code degeneracy and the graph structure of quantum low-density parity-check (QLDPC) codes, the performance of conventional belief propagation (BP) decoding can be poor. Recently, belief propagation guided decimation (BPGD) has shown promise to combat these challenges. In this paper, we investigate various decimation approaches to improve the error correcting performance and convergence speed of BPGD. We first consider soft decimation, where the BP equations are modified via several tuneable parameters. This approach exhibits linear complexity relative to the length of the block code and is shown to outperform hard decimation approaches for careful selection of the algorithm parameters. We then combine the approaches in a "soft-hard" BPGD variant, where hard decisions are periodically made and those symbols are permanently fixed throughout the remainder of the decoding process. Simulation results show that further performance improvement can be observed in this case at the cost of increasing the algorithmic complexity.
Variant belief propagation (BP) algorithms are applied to low-density parity-check (LDPC) codes. However, conventional decoders suffer from a large resource consumption due to gathering messages from all the neighbour variable-nodes and/or check-nodes through cumulative calculations. In this paper, a check-belief propagation (CBP) decoding algorithm is proposed. Check-belief is used as the probability that the corresponding parity-check is satisfied. All check-beliefs are iteratively enlarged in a sequential recursive order, and successful decoding will be achieved after the check-beliefs are all big enough. Compared to previous algorithms employing a large number of cumulative calculations to gather all the neighbour messages, CBP decoding can renew each check-belief by propagating it from one check-node to another through only one variable-node, resulting in a low complexity decoding with no cumulative calculations. The simulation results and analyses show that the CBP algorithm provides little error-rate performance loss in contrast with the previous BP algorithms, but consumes much fewer calculations and memories than them. It earns a big benefit in terms of complexity.