Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2512.07409

Open qubit parameter identification with bounded pulses

Ghaieth Aloui, Ivan Beschastnyi, Ludovic Sacchelli

Published Dec 8, 2025• 0 citations
arXivHTMLPDF

Abstract

We address the problem of parameter identification for a single open qubit subjected to relaxation and dephasing. Our approach is based on selecting a minimal set of carefully chosen qubit configurations that can be reliably prepared and measured in order to provide an interpretable methodology of parameter identification while potentially minimizing experimental overhead. The protocol relies on saturating control pulses to generate these configurations. In an idealized regime of infinite-amplitude pulses, we demonstrate that the parameters can be reconstructed analytically from the measured observables. We then consider large but finite pulses as a perturbation of this ideal regime and provide bounds on the estimation error introduced by the practical implementation. This framework allows us to separate the sources of uncertainty in the estimation procedure, distinguishing between statistical fluctuations arising from repeated measurements and modeling errors due to deviations from the ideal pulse regime.

DOI
10.48550/arxiv.2512.07409

Related papers

Qubits as spectrometers of dephasing noise

Kevin C Young, K. Birgitta Whaley

We present a procedure for direct characterization of the dephasing noise acting on a single qubit by making repeated measurements of the qubit coherence under suitably chosen sequences of controls. We show that this allows a numerical reconstruction of the short-time noise correlation function and that it can be combined with a series of measurements under free evolution to allow a characterization of the noise correlation function over many orders of magnitude range in time scale. We also make an analysis of the robustness and reliability of the estimated correlation functions. Application to a simple model of two uncorrelated noise fluctuators using decoupling pulse sequences shows that the approach provides a useful route for the experimental characterization of dephasing noise and its statistical properties in a variety of condensed phase and atomic systems.

arXiv:1102.5115•Physical Review A•Jul 13, 2012•50 citations

Estimation, control, and relaxation in quantum systems

Riddhi Ghosh

This thesis presents a collection of projects spanning different sub-fields of quantum science, undertaken with the goal of understanding and advancing quantum technologies. Broadly, it can be divided into two thematic parts — parameter estimation and open system dynamics. Each project addresses inverse and ill-posed problems in Physics, which lie at the heart of developing robust and scalable quantum devices.A central theme in quantum technology is the challenge of inference of microscopic system parameters from limited, indirect observations. The first part of the thesis investigates this through the problem of Hamiltonian reconstruction via local measurements. Indirect estimation of couplings in quantum systems relies on the measurement of the spectrum and the overlap of eigenvectors with some reference state. For a one-dimensional chain, this data can be obtained by local measurement on one end of the chain, thereby reducing the need for full Hamiltonian tomography. Information about couplings is extracted from the temporal data obtained by measuring the expectation values of the time evolution 𝑒−𝑖𝐻𝑡 for a reference state. In Chapter 3, we analyze the robustness of this estimation scheme under perturbations arising from beyond nearest neighbour interactions. We show that the error scales linearly with the strength of such interactions and on average, the error increases with the distance of interaction between sites.Chapter 4 examines whether coupling information can be extracted from local thermal measurements, using expectation values of the Gibbs state at varying temperatures rather than temporal data. We develop a procedure to obtain the coefficients of the Taylor expansion of these expectation values and relate them to the Hamiltonian parameters. For very small chains, this mapping can be carried out analytically, while for larger systems it reveals the algebraic structure that links local measurements to the underlying couplings and highlights the trade-offs between measurement resources, numerical stability, and identifiability. The analysis also clarifies how additional local fields or self-interaction terms enhance the information content of thermal data, suggesting a role for local thermal probes as practical tools for Hamiltonian verification and parameter estimation.Building on the ideas of controlling and inferring information about a quantum system, we now turn to active intervention through adaptive measurement. In Chapter 5, we develop a process tensor driven procedure for cooling the spin bath that is coupled to a nitrogen vacancy (NV) center in diamond. By modeling the sequence of intermediate quantum instruments acting on a correlated system-environment process, we optimize a pair of completely positive (CP) maps to maximize the population in a lower-energy state. Unlike existing approaches that rely solely on positive operator valued measures (POVMs), our method encompasses a broader class of CP maps, including adaptive feed-forward and mixed operations. We explicitly account for initial correlation between system and environment and distinguish between the controllable and uncontrollable parts of the dynamics. Our framework supports non-Markovian operations and benchmarks them against optimal Markovian strategies. The optimization is performed via Semi-definite Programming (SDP), ensuring global optimality. We also assess robustness to Hamiltonian noise and provide a proposal for implementation using NV center in diamonds.Finally, Chapter 6 explore the relaxation dynamics of topological qubits, focusing on a tetron qubit formed from two uncoupled Kitaev chains coupled to a finite fermionic bath. Using the correlation matrix formalism for purely quadratic couplings, we show that the relaxation is fundamentally independent of temperature when either the bath is large, or the zero-mode energy of the system is close to zero. This challenges a key assumption in the field that cooling enhances coherence. Interestingly, we find that introducing glassy disorder into the system slows down relaxation, offering a potential route to prolong qubit lifetimes.Collectively, these studies form a coherent narrative around extraction, control and utilization of quantum information under fundamental constraints. By tackling such inverse and often ill-posed problems, this thesis contributes new tools and insights essential for the realization of future quantum technologies.

•Dec 22, 2025•0 citations

Robust calibration of a universal single-qubit gate set via robust phase estimation

Shelby Kimmel, Guang Hao Low, Theodore J. Yoder

An important step in building a quantum computer is calibrating experimentally implemented quantum gates to produce operations that are close to ideal unitaries. The calibration step involves estimating the systematic errors in gates and then using controls to correct the implementation. Quantum process tomography is a standard technique for estimating these errors but is both time consuming (when one wants to learn only a few key parameters) and usually inaccurate without resources such as perfect state preparation and measurement, which might not be available. With the goal of efficiently and accurately estimating specific errors using minimal resources, we develop a parameter estimation technique, which can gauge key systematic parameters (specifically, amplitude and off-resonance errors) in a universal single-qubit gate set with provable robustness and efficiency. In particular, our estimates achieve the optimal efficiency, Heisenberg scaling, and do so without entanglement and entirely within a single-qubit Hilbert space. Our main theorem making this possible is a robust version of the phase estimation procedure of Higgins et al. [B. L. Higgins et al., New J. Phys. 11, 073023 (2009)].

arXiv:1502.02677•Physical Review A•Dec 8, 2015•155 citations

Controlling quantum systems for quantum information processing

Kevin C Young

For several decades it has been appreciated that quantum computers hold incredible promise to perform calculations intractable to classical computation. However, this promise has be slow to realize. Dozens of quantum systems are currently being investigated for use in quantum information processing - none of which have yet demonstrated algorithms involving more than a handful of qubits and it remains unclear which, if any, of these systems will ultimately compose a scalable, robust quantum information processing architecture. In this thesis we employ analytical, optimal and algebraic control techniques to evaluate various quantum systems for their potential use in quantum information processing. In doing so, we have additionally identified several novel characterization procedures capable of probing both the coherent and incoherent dynamics of quantum systems. The first part of this thesis discusses work motivated by attempts to utilize donor qubits in silicon as quantum bits. We first propose a measurement of the state of a single donor electron spin using two-dimensional electron gas of a field-effect transistor and electrically detected magnetic resonance. We analyze the potential sensitivity of this measurement and show that it is a quantum nondemolition measurement of an electron-encoded state. We then present the first of two novel qubit characterization procedures. We consider the problem of rapidly characterizing a large number of similarly prepared qubits using techniques from optimal experiment design. All qubits are assumed to evolve according to the same physical processes, though the Hamiltonian parameters may vary from device to device - an inevitability in solid state qubits. We use the Cram\\'er-Rao bound on the variance of a point estimator to construct the optimal series of experiments to estimate these free parameters, and present a complete analysis of the optimal experimental configuration. Though applied to dipole- and exchange-coupled qubits, this technique is widely applicable to other systems. The second part of the thesis discusses the role that control can play in measuring and mitigating noise in qubit systems. Our first result describes a method for quickly simulating the effects of arbitrary markovian noise on qubit systems through the use of a numerically optimized, multi-state Markovian fluctuator. This ability to rapidly simulate the noisy qubit evolution allows us to compute control sequences capable of maximally decoupling the qubit from the noise source. We then introduce the second characterization procedure of the these, showing that a single measurable and controllable qubit may act as a spectrometer of dephasing noise. We show that the formalism of dynamical decoupling can be used to estimate the short-time correlation function of the noise source, while long time correlations may be estimated by a very simple series of free evolution experiments. This technique is applicable to the wide range of physical implementations which suffer from dephasing noise.The final part of this thesis demonstrates that trapped neutral atoms may be utilized for the robust simulation of complex systems exhibiting a topological phase. We present a method to simulate the toric code Hamiltonian stroboscopically, and demonstrate that our technique preserves the ground state degeneracy . Furthermore, we introduce a dissipative mechanism allowing for thermalization of the system to a finite temperature or direct cooling to the ground state manifold.

•Jan 1, 2010•0 citations

Qubit Quantum Metrology with Limited Measurement Resources

Jason Saunders, Jean-François S. Van Huele

Quantum resources, such as entanglement, can decrease the uncertainty of a parameter-estimation procedure beyond what is classically possible. This phenomenon is well described for noiseless systems with asymptotically many measurement resources by the Quantum Cramer-Rao Bound, but no general description exists for the regime of limited measurement resources. We address this problem by defining a Bayesian quantifier for uncertainty suitable for the regime of limited resources, and by developing a mathematical description for a parameter-estimation procedure which uses qubit probes to estimate a rotation angle induced on them. We simulate the qubit estimation scheme in the regime of limited resources using a single class of probe states. We find that, in noiseless systems, entanglement between qubits always decreases the uncertainty of the estimation; however, the quantum advantage decreases as fewer qubits are used in the estimation. We also find that the presence of strong dephasing noise removes the quantum advantage completely, regardless of the number of qubit probes used.

arXiv:2108.02876•Aug 5, 2021•4 citations

From Static Lindblad Stabilizability to Robust Physical Control Sequences

Yibin Wang, Ruifeng Liu

Dissipative dynamics can stabilize a quantum target without providing a reliable sequence of finite control operations. We derive checkable conditions for implementing such stabilization with imperfect controls, with bounds on convergence, errors during operations, and physical cost. The analysis includes pulses, idle intervals, and all simultaneously acting background dynamics. Using a common Lyapunov measure of deviation from the target, we require a contraction bound that remains uniformly below one over the prescribed uncertainty set after accounting for implementation errors. If all allowed paths preserve the target subspace throughout each operation, repeated cycles converge to that subspace from every initial state, even when errors vary between cycles. Comparison with these certified target-preserving paths gives an explicit long-time error bound under bounded leakage. Two single-qubit counterexamples show why a stabilizing average or a stabilizing generator obtained by unitary conjugation does not ensure these path conditions. The certification approach also supports a finite-library search. For a specified four-level cascade model with finite pulses, calibration and timing errors, dephasing, and bounded pumping, this search yields a sequence with an explicit preparation-time bound. For every initial state, it guarantees trace distance at most $0.1$ from the target at the end of preparation and throughout subsequent cycles.

quant-pharXiv:2610.02362•Oct 5, 2026•0 citations
We address the problem of parameter identification for a single open qubit subjected to relaxation and dephasing. Our approach is based on selecting a minimal set of carefully chosen qubit configurations that can be reliably prepared and measured in order to provide an interpretable methodology of parameter identification while potentially minimizing experimental overhead. The protocol relies on saturating control pulses to generate these configurations. In an idealized regime of infinite-amplitude pulses, we demonstrate that the parameters can be reconstructed analytically from the measured observables. We then consider large but finite pulses as a perturbation of this ideal regime and provide bounds on the estimation error introduced by the practical implementation. This framework allows us to separate the sources of uncertainty in the estimation procedure, distinguishing between statistical fluctuations arising from repeated measurements and modeling errors due to deviations from the ideal pulse regime.
We present a procedure for direct characterization of the dephasing noise acting on a single qubit by making repeated measurements of the qubit coherence under suitably chosen sequences of controls. We show that this allows a numerical reconstruction of the short-time noise correlation function and that it can be combined with a series of measurements under free evolution to allow a characterization of the noise correlation function over many orders of magnitude range in time scale. We also make an analysis of the robustness and reliability of the estimated correlation functions. Application to a simple model of two uncorrelated noise fluctuators using decoupling pulse sequences shows that the approach provides a useful route for the experimental characterization of dephasing noise and its statistical properties in a variety of condensed phase and atomic systems.
This thesis presents a collection of projects spanning different sub-fields of quantum science, undertaken with the goal of understanding and advancing quantum technologies. Broadly, it can be divided into two thematic parts — parameter estimation and open system dynamics. Each project addresses inverse and ill-posed problems in Physics, which lie at the heart of developing robust and scalable quantum devices.A central theme in quantum technology is the challenge of inference of microscopic system parameters from limited, indirect observations. The first part of the thesis investigates this through the problem of Hamiltonian reconstruction via local measurements. Indirect estimation of couplings in quantum systems relies on the measurement of the spectrum and the overlap of eigenvectors with some reference state. For a one-dimensional chain, this data can be obtained by local measurement on one end of the chain, thereby reducing the need for full Hamiltonian tomography. Information about couplings is extracted from the temporal data obtained by measuring the expectation values of the time evolution 𝑒−𝑖𝐻𝑡 for a reference state. In Chapter 3, we analyze the robustness of this estimation scheme under perturbations arising from beyond nearest neighbour interactions. We show that the error scales linearly with the strength of such interactions and on average, the error increases with the distance of interaction between sites.Chapter 4 examines whether coupling information can be extracted from local thermal measurements, using expectation values of the Gibbs state at varying temperatures rather than temporal data. We develop a procedure to obtain the coefficients of the Taylor expansion of these expectation values and relate them to the Hamiltonian parameters. For very small chains, this mapping can be carried out analytically, while for larger systems it reveals the algebraic structure that links local measurements to the underlying couplings and highlights the trade-offs between measurement resources, numerical stability, and identifiability. The analysis also clarifies how additional local fields or self-interaction terms enhance the information content of thermal data, suggesting a role for local thermal probes as practical tools for Hamiltonian verification and parameter estimation.Building on the ideas of controlling and inferring information about a quantum system, we now turn to active intervention through adaptive measurement. In Chapter 5, we develop a process tensor driven procedure for cooling the spin bath that is coupled to a nitrogen vacancy (NV) center in diamond. By modeling the sequence of intermediate quantum instruments acting on a correlated system-environment process, we optimize a pair of completely positive (CP) maps to maximize the population in a lower-energy state. Unlike existing approaches that rely solely on positive operator valued measures (POVMs), our method encompasses a broader class of CP maps, including adaptive feed-forward and mixed operations. We explicitly account for initial correlation between system and environment and distinguish between the controllable and uncontrollable parts of the dynamics. Our framework supports non-Markovian operations and benchmarks them against optimal Markovian strategies. The optimization is performed via Semi-definite Programming (SDP), ensuring global optimality. We also assess robustness to Hamiltonian noise and provide a proposal for implementation using NV center in diamonds.Finally, Chapter 6 explore the relaxation dynamics of topological qubits, focusing on a tetron qubit formed from two uncoupled Kitaev chains coupled to a finite fermionic bath. Using the correlation matrix formalism for purely quadratic couplings, we show that the relaxation is fundamentally independent of temperature when either the bath is large, or the zero-mode energy of the system is close to zero. This challenges a key assumption in the field that cooling enhances coherence. Interestingly, we find that introducing glassy disorder into the system slows down relaxation, offering a potential route to prolong qubit lifetimes.Collectively, these studies form a coherent narrative around extraction, control and utilization of quantum information under fundamental constraints. By tackling such inverse and often ill-posed problems, this thesis contributes new tools and insights essential for the realization of future quantum technologies.
An important step in building a quantum computer is calibrating experimentally implemented quantum gates to produce operations that are close to ideal unitaries. The calibration step involves estimating the systematic errors in gates and then using controls to correct the implementation. Quantum process tomography is a standard technique for estimating these errors but is both time consuming (when one wants to learn only a few key parameters) and usually inaccurate without resources such as perfect state preparation and measurement, which might not be available. With the goal of efficiently and accurately estimating specific errors using minimal resources, we develop a parameter estimation technique, which can gauge key systematic parameters (specifically, amplitude and off-resonance errors) in a universal single-qubit gate set with provable robustness and efficiency. In particular, our estimates achieve the optimal efficiency, Heisenberg scaling, and do so without entanglement and entirely within a single-qubit Hilbert space. Our main theorem making this possible is a robust version of the phase estimation procedure of Higgins et al. [B. L. Higgins et al., New J. Phys. 11, 073023 (2009)].
For several decades it has been appreciated that quantum computers hold incredible promise to perform calculations intractable to classical computation. However, this promise has be slow to realize. Dozens of quantum systems are currently being investigated for use in quantum information processing - none of which have yet demonstrated algorithms involving more than a handful of qubits and it remains unclear which, if any, of these systems will ultimately compose a scalable, robust quantum information processing architecture. In this thesis we employ analytical, optimal and algebraic control techniques to evaluate various quantum systems for their potential use in quantum information processing. In doing so, we have additionally identified several novel characterization procedures capable of probing both the coherent and incoherent dynamics of quantum systems. The first part of this thesis discusses work motivated by attempts to utilize donor qubits in silicon as quantum bits. We first propose a measurement of the state of a single donor electron spin using two-dimensional electron gas of a field-effect transistor and electrically detected magnetic resonance. We analyze the potential sensitivity of this measurement and show that it is a quantum nondemolition measurement of an electron-encoded state. We then present the first of two novel qubit characterization procedures. We consider the problem of rapidly characterizing a large number of similarly prepared qubits using techniques from optimal experiment design. All qubits are assumed to evolve according to the same physical processes, though the Hamiltonian parameters may vary from device to device - an inevitability in solid state qubits. We use the Cram\\'er-Rao bound on the variance of a point estimator to construct the optimal series of experiments to estimate these free parameters, and present a complete analysis of the optimal experimental configuration. Though applied to dipole- and exchange-coupled qubits, this technique is widely applicable to other systems. The second part of the thesis discusses the role that control can play in measuring and mitigating noise in qubit systems. Our first result describes a method for quickly simulating the effects of arbitrary markovian noise on qubit systems through the use of a numerically optimized, multi-state Markovian fluctuator. This ability to rapidly simulate the noisy qubit evolution allows us to compute control sequences capable of maximally decoupling the qubit from the noise source. We then introduce the second characterization procedure of the these, showing that a single measurable and controllable qubit may act as a spectrometer of dephasing noise. We show that the formalism of dynamical decoupling can be used to estimate the short-time correlation function of the noise source, while long time correlations may be estimated by a very simple series of free evolution experiments. This technique is applicable to the wide range of physical implementations which suffer from dephasing noise.The final part of this thesis demonstrates that trapped neutral atoms may be utilized for the robust simulation of complex systems exhibiting a topological phase. We present a method to simulate the toric code Hamiltonian stroboscopically, and demonstrate that our technique preserves the ground state degeneracy . Furthermore, we introduce a dissipative mechanism allowing for thermalization of the system to a finite temperature or direct cooling to the ground state manifold.
Quantum resources, such as entanglement, can decrease the uncertainty of a parameter-estimation procedure beyond what is classically possible. This phenomenon is well described for noiseless systems with asymptotically many measurement resources by the Quantum Cramer-Rao Bound, but no general description exists for the regime of limited measurement resources. We address this problem by defining a Bayesian quantifier for uncertainty suitable for the regime of limited resources, and by developing a mathematical description for a parameter-estimation procedure which uses qubit probes to estimate a rotation angle induced on them. We simulate the qubit estimation scheme in the regime of limited resources using a single class of probe states. We find that, in noiseless systems, entanglement between qubits always decreases the uncertainty of the estimation; however, the quantum advantage decreases as fewer qubits are used in the estimation. We also find that the presence of strong dephasing noise removes the quantum advantage completely, regardless of the number of qubit probes used.
Dissipative dynamics can stabilize a quantum target without providing a reliable sequence of finite control operations. We derive checkable conditions for implementing such stabilization with imperfect controls, with bounds on convergence, errors during operations, and physical cost. The analysis includes pulses, idle intervals, and all simultaneously acting background dynamics. Using a common Lyapunov measure of deviation from the target, we require a contraction bound that remains uniformly below one over the prescribed uncertainty set after accounting for implementation errors. If all allowed paths preserve the target subspace throughout each operation, repeated cycles converge to that subspace from every initial state, even when errors vary between cycles. Comparison with these certified target-preserving paths gives an explicit long-time error bound under bounded leakage. Two single-qubit counterexamples show why a stabilizing average or a stabilizing generator obtained by unitary conjugation does not ensure these path conditions. The certification approach also supports a finite-library search. For a specified four-level cascade model with finite pulses, calibration and timing errors, dephasing, and bounded pumping, this search yields a sequence with an explicit preparation-time bound. For every initial state, it guarantees trace distance at most 0.10.10.1 from the target at the end of preparation and throughout subsequent cycles.