Quantum error correction (QEC) requires ancilla qubits to extract error syndromes from data qubits which store quantum information. However, ancilla errors can propagate back to the data qubits, introducing additional errors and limiting fault-tolerance. In superconducting quantum circuits, Kerr-cat qubits (KCQs), which exhibit strongly biased noise, have been proposed as ancillas to suppress this back-action and enhance QEC performance. Here, we experimentally demonstrate a beamsplitter interaction between a KCQ and a transmon, realizing an effective $σ_zσ_x$ coupling that can be employed for parity measurements in QEC protocols. We characterize the interaction across a range of cat sizes and drive amplitudes, confirming the expected scaling of the interaction rate. These results establish a step towards hybrid architectures that combine transmons as data qubits with noise-biased bosonic ancillas, enabling hardware-efficient syndrome extraction and advancing the development of fault-tolerant quantum processors.
Experimental signatures of a σzσx beam-splitter interaction between a Kerr-cat and transmon qubit
Quantum error correction (QEC) requires ancilla qubits to extract error syndromes from data qubits which store quantum information. However, ancilla errors can propagate back to the data qubits, introducing additional errors and limiting fault-tolerance. In superconducting quantum circuits, Kerr-cat qubits (KCQs), which exhibit strongly biased noise, have been proposed as ancillas to suppress this back-action and enhance QEC performance. Here, we experimentally demonstrate a beamsplitter interaction between a KCQ and a transmon, realizing an effective σzσx coupling that can be employed for parity measurements in QEC protocols. We characterize the interaction across a range of cat sizes and drive amplitudes, confirming the expected scaling of the interaction rate. These results establish a step towards hybrid architectures that combine transmons as data qubits with noise-biased bosonic ancillas, enabling hardware-efficient syndrome extraction and advancing the development of fault-tolerant quantum processors.
Dissipative cat qubits are a promising physical platform for quantum computing, since their large noise bias can enable more hardware-efficient quantum error correction. In this work we theoretically study the long-term prospects of a hybrid cat-transmon quantum computing architecture where dissipative cat qubits play the role of data qubits, and error syndromes are measured using ancillary transmon qubits. The cat qubits’ noise bias enables more hardware-efficient quantum error correction, and the use of transmons allows for practical, high-fidelity syndrome measurement. While correction of the dominant cat Z errors with a repetition code has recently been demonstrated in experiment, here we show how the architecture can be scaled beyond a repetition code. In particular, we propose a cat-transmon entangling gate that enables the correction of residual cat X errors in a thin rectangular surface code, so that logical error can be arbitrarily suppressed by increasing code distance. We numerically estimate logical memory performance, finding significant overhead reductions in comparison to architectures without biased noise. For example, with current state-of-the-art coherence, physical error rates of 10 − 3 and noise biases in the range 10 3 – 10 4 are achievable. With this level of performance, the qubit overhead required to reach algorithmically relevant logical error rates with the cat-transmon architecture matches that of an unbiased-noise architecture with physical error rates in the range 10 − 5 – 10 − 4 .
In quantum error correction, information is encoded in a high-dimensional system to protect it from the environment.A crucial step is to use natural, two-body operations with an ancilla to extract information about errors without causing backaction on the encoded information.Essentially, ancilla errors must not propagate to the encoded system and induce errors beyond those which can be corrected.The current schemes for achieving this fault tolerance to ancilla errors come at the cost of increased overhead requirements.An efficient way to extract error syndromes in a fault-tolerant manner is by using a single ancilla with a strongly biased noise channel.Typically, however, required elementary operations can become challenging when the noise is extremely biased.We propose to overcome this shortcoming by using a bosonic-cat ancilla in a parametrically driven nonlinear oscillator.Such a cat qubit experiences only bit-flip noise, while the phase flips are exponentially suppressed.To highlight the flexibility of this approach, we illustrate the syndrome extraction process in a variety of codes such as qubit-based toric, bosonic-cat, and Gottesman-Kitaev-Preskill codes.Our results open a path for realizing hardware-efficient, fault-tolerant error syndrome extraction.
Quantum error correction using erasure qubits offers higher fault-tolerant thresholds and improved scaling by converting dominant physical errors into detectable erasures. In superconducting circuits, erasure qubits can be constructed using the dual-rail approach, which, however, requires additional qubit-count overhead and tailored coupling elements. Here, we demonstrate a hardware-efficient scheme that operates transmon qutrits as erasure qubits, which is compatible with standard superconducting circuit-QED hardware. The logical states ∣0L⟩ and ∣1L⟩ are represented by the ground and second excited states, while the dominant relaxation errors can be detected via an ancilla qubit using a microwave-activated two-qutrit SWAP gate. We demonstrate a logical qubit T1 lifetime exceeding 500μs, post-selected with repeated mid-circuit erasure detection, which is ten times longer than the T1 time of the transmon physical qubit. Coherence times beyond 300μs are achieved using dynamical decoupling. Single-qubit gate operations reach average Clifford gate infidelity on the order of 10−4. We further demonstrate dual-purposing an ancilla qubit for both erasure detection and parity checking, showing heralded generation of Bell states between erasure qubits. These results suggest that mainstream architectures of transmon qubit arrays may already be capable of implementing erasure-based QEC strategies for hardware-efficient fault-tolerant quantum computing.
Quantum error correction (QEC) is essential for practical quantum computation, but conventional approaches require large numbers of physical qubits per logical qubit, imposing severe hardware overhead. Noise-biased qubits, in which one error type dominates over the others, offer a route to reducing this overhead by enabling tailored QEC codes that exploit the error asymmetry. This work demonstrates, through two separate experiments, that combining Hamiltonian and dissipation engineering provides a versatile framework for enhancing the noise-bias of superconducting qubits. In the first experiment, we focus on the Kerr-cat qubit (KCQ), a noise-biased qubit encoded in the degenerate eigenstates of a two-photon driven Kerr oscillator, and study leakage outside the KCQ manifold, a key limitation of this system. We apply microwave pulses to selectively address the leakage states and to perform the first direct measurement of their population. We find a leakage population exceeding 9 %, consistent with substantial quantum heating and twelve times larger than the thermal excited-state population of the undriven oscillator. To reduce it, we introduce frequency-selective engineered single-photon dissipation. We show that this suppresses the leakage and extends the bit-flip time to 3.6 ms, while leaving the phase-flip time unchanged and reaching a qubit noise bias of 1400. In the second experiment, we introduce the gain-engineered transmon: a qubit encoded in the |g⟩ and |f⟩ levels of a standard transmon, in which a frequency-selective engineered single-photon-gain channel on the |e⟩ ↔ |f⟩ transition autonomously corrects single-photon loss errors. We demonstrate a factor-of-17 enhancement of the relaxation time, at the cost of only a 2.1 reduction in echo coherence time, while maintaining single-qubit gate errors below 0.5 %. Numerical simulations further show that the gain-engineered transmon can serve as a noisebiased ancilla for fault-tolerant error detection, suppressing both the ancilla detection infidelity and the error backaction below those of a standard |g⟩ ↔ |e⟩ ancilla qubit. These results establish the combination of Hamiltonian and dissipation engineering as a practical strategy for protecting quantum information. Because our architectures build on standard superconducting circuits, they integrate easily into existing platforms. We envision that steady improvements to noise-biased qubits, such as those developed in this thesis, could allow them to replace the transmon as the building block of superconducting quantum processors, lowering the hardware overhead of fault-tolerant quantum computation. Beyond quantum information processing, the driven nonlinear oscillators discussed in this thesis may serve as analog simulators of complex quantum dynamics, and as platforms for studying fundamental effects in driven-dissipative systems.
Fault-tolerant quantum computation with bosonic qubits often necessitates the use of noisy discrete-variable ancillae. In this work, we establish a comprehensive and practical fault-tolerance framework for such a hybrid system and synthesize it with fault-tolerant protocols by combining bosonic quantum error correction (QEC) and advanced quantum control techniques. We introduce essential building blocks of error-corrected gadgets by leveraging ancilla-assisted bosonic operations using a generalized variant of path-independent quantum control. Using these building blocks, we construct a universal set of error-corrected gadgets that tolerate a single-photon loss and an arbitrary ancilla fault for four-legged cat qubits. Notably, our construction requires only dispersive coupling between bosonic modes and ancillae, as well as beam-splitter coupling between bosonic modes, both of which have been experimentally demonstrated with strong strengths and high accuracy. Moreover, each error-corrected bosonic qubit is comprised of only a single bosonic mode and a three-level ancilla, featuring the hardware efficiency of bosonic QEC in the full fault-tolerant setting. We numerically demonstrate the feasibility of our schemes using current experimental parameters in the circuit-QED platform. Finally, we present a hardware-efficient architecture for fault-tolerant quantum computing by concatenating the four-legged cat qubits with an outer qubit code utilizing only beam-splitter couplings. Our estimates suggest that the overall noise threshold can be reached using existing hardware. These developed fault-tolerant schemes extend beyond their applicability to four-legged cat qubits and can be adapted for other rotation-symmetrical codes, offering a promising avenue toward scalable and robust quantum computation with bosonic qubits. Published by the American Physical Society 2024
To solve problems of practical importance1,2, quantum computers probably need to incorporate quantum error correction, in which a logical qubit is redundantly encoded in many noisy physical qubits3–5. The large physical-qubit overhead associated with error correction motivates the search for more hardware-efficient approaches6–18. Here, using a superconducting quantum circuit19, we realize a logical qubit memory formed from the concatenation of encoded bosonic cat qubits with an outer repetition code of distance d = 5 (ref. 10). A stabilizing circuit passively protects cat qubits against bit flips20–24. The repetition code, using ancilla transmons for syndrome measurement, corrects cat qubit phase flips. We study the performance and scaling of the logical qubit memory, finding that the phase-flip correcting repetition code operates below the threshold. The logical bit-flip error is suppressed with increasing cat qubit mean photon number, enabled by our realization of a cat-transmon noise-biased CX gate. The minimum measured logical error per cycle is on average 1.75(2)% for the distance-3 code sections, and 1.65(3)% for the distance-5 code. Despite the increased number of fault locations of the distance-5 code, the high degree of noise bias preserved during error correction enables comparable performance. These results, where the intrinsic error suppression of the bosonic encodings enables us to use a hardware-efficient outer error-correcting code, indicate that concatenated bosonic codes can be a compelling model for reaching fault-tolerant quantum computation. Bosonic qubits can be engineered to feature intrinsic protection against certain kinds of errors, which makes quantum error correction across many bosonic qubits possible with less overhead.