High-fidelity numerical methods that model the physical layout of a device are essential for the design of many technologies. For methods that characterize electromagnetic effects, these numerical methods are referred to as computational electromagnetics (CEM) methods. Although the CEM research field is mature, emerging applications can still stress the capabilities of the techniques in use today. The design of superconducting circuit quantum devices falls in this category due to the unconventional material properties and important features of the devices covering nanometer to centimeter scales. Such multiscale devices can stress the fundamental properties of CEM tools which can lead to an increase in simulation times, a loss in accuracy, or even cause no solution to be reliably found. While these challenges are being investigated by CEM researchers, knowledge about them is limited in the broader community of users of these CEM tools. This review is meant to serve as a practical introduction to the fundamental aspects of the major CEM techniques that a researcher may need to choose between to model a device, as well as provide insight into what steps they may take to alleviate some of their challenges. Our focus is on highlighting the main concepts without rigorously deriving all the details, which can be found in many textbooks and articles. After covering the fundamentals, we discuss more advanced topics related to the challenges of modeling multiscale devices with specific examples from superconducting circuit quantum devices. We conclude with a discussion on future research directions that will be valuable for improving the ability to successfully design increasingly more sophisticated superconducting circuit quantum devices. Although our focus and examples are taken from this area, researchers from other fields will still benefit from the details discussed here.
High-fidelity numerical methods that model the physical layout of a device are essential for the design of many technologies. For methods that characterize electromagnetic effects, these numerical methods are referred to as computational electromagnetics (CEM) methods. Although the CEM research field is mature, emerging applications can still stress the capabilities of the techniques in use today. The design of superconducting circuit quantum devices falls in this category due to the unconventional material properties and important features of the devices covering nanometer to centimeter scales. Such multiscale devices can stress the fundamental properties of CEM tools which can lead to an increase in simulation times, a loss in accuracy, or even cause no solution to be reliably found. While these challenges are being investigated by CEM researchers, knowledge about them is limited in the broader community of users of these CEM tools. This review is meant to serve as a practical introduction to the fundamental aspects of the major CEM techniques that a researcher may need to choose between to model a device, as well as provide insight into what steps they may take to alleviate some of their challenges. Our focus is on highlighting the main concepts without rigorously deriving all the details, which can be found in many textbooks and articles. After covering the fundamentals, we discuss more advanced topics related to the challenges of modeling multiscale devices with specific examples from superconducting circuit quantum devices. We conclude with a discussion on future research directions that will be valuable for improving the ability to successfully design increasingly more sophisticated superconducting circuit quantum devices. Although our focus and examples are taken from this area, researchers from other fields will still benefit from the details discussed here.
This review aims to provide researchers, experimentalists, and quantum engineers with an updated and technically grounded perspective on the implementation of quantum gates in superconducting NISQ devices. The goal is to establish a comprehensive bridge between theoretical quantum circuit synthesis and its practical, experimental implementation, focusing on superconducting quantum technologies. We systematically examine the diverse landscape of superconducting qubits and processor architectures, ranging from conventional transmons to alternative and unconventional designs, evaluating their unique design trade-offs, connectivity constraints, device physics, and materials impact. Moving from theory to actual implementation, we detail how single- and two-qubit operations are synthesized via microwave-driven and flux-activated pulses. We here present our pulse engineering, wave shaping, calibration workflows, demonstrating how to bridge the gap between abstract gate models and real-world hardware limitations in the direction of a hardware-software co-design framework. To validate these operations, we choose benchmarking methodologies with the purpose to get the more efficient metric for the specific evaluation aspect, including truth tables and quantum process tomography. Therefore, we both discuss the theoretical concepts behind the gate synthesis and show experimental implementation of most fundamental gates by proposing a practical workflow.
Abstract In this short review we describe the process of designing a superconducting circuit device for quantum information applications. We discuss the factors that must be considered to implement a desired effective Hamiltonian on a device. We describe the translation between a device’s physical layout, the circuit graph, and the effective Hamiltonian. We go over the process of electromagnetic simulation of a device layout to predict its behavior. We also discuss concerns such as connectivity, crosstalk suppression, and radiation shielding, and how they affect both on-chip design and enclosure structures. This paper provides an overview of the challenges in superconducting quantum circuit design and acts as a starter document for researchers working on any of these challenges.
The precise engineering of electromagnetic couplings is paramount for constructing scalable and high-fidelity superconducting quantum processors. While essential for orchestrating qubit operations, these couplings also present significant design challenges, including the mitigation of crosstalk and the management of environmental decoherence. A clear and unified theoretical framework is therefore crucial for the design, simulation, and analysis of these complex quantum circuits. This paper presents a comprehensive theoretical treatment of the fundamental electromagnetic coupling mechanisms in superconducting devices. Starting from first principles, we formulate the equations of motion and derive the input-output relations for canonical systems, including a single resonator coupled to a multi-port microwave network, interacting resonators, and coupled transmission lines. We review rigorous definitions for key parameters such as the energy decay rate (κ) and the dimensionless coupling coefficient (ζ) and connect these formalisms to practical methods of parameter extraction from electromagnetic simulations. This work provides a rigorous and pedagogical foundation for understanding and modeling linear electromagnetic interactions, serving as a vital resource for the development of advanced superconducting quantum hardware.
Superconducting quantum circuits (SQCs), composed of superconducting capacitors, inductances, Josephson junctions, and transmission lines, exhibit macroscopic quantum effects at ultra-low temperatures. Due to the extremely low dissipation of superconductors, an important application of SQCs is superconducting qubits with long coherence time. Quantum computing based on superconducting qubits is a leading physical realization method of quantum computing, which is theoretically capable of accelerating many computational problems including quantum simulation, database searching, and optimization. In the long run, to use the power of quantum computing to its full extent, universal quantum computers should be constructed with quantum error correction. In the short term, one of the most pressing targets of the superconducting quantum computing community is to demonstrate quantum advantage using noisy intermediate-scale quantum chips. Both goals rely on the increasing of the number of coupled qubits in a quantum circuit and the quality of these qubits, which dictate the breadth and the depth of a problem it can solve, respectively. The fabrication of SQCs has adopted a few manufacturing processes from conventional integrated circuits. Quantum chips containing multiple superconducting qubits can be made and packaged on a large scale. “Quantum supremacy” has been demonstrated on a quantum chip with fifty-three qubits fabricated using the flip-chip bonding technology. However, to demonstrate quantum advantage, the quality and quantity of qubits need to increase simultaneously. Dissipative channels emerge in circuit design, material preparation, chip fabrication, and working environment, limiting the lifetime of superconducting qubits. For quantum chips with tens to hundreds of qubits, the integration will also introduce extra processing steps which may degrade the qubits, and unwanted coupling to loss channels. Most of these channels are microscopically related to materials constructing the quantum chips, chip surfaces, and material interfaces. Thus, it is important to investigate the material growth and device fabrication of SQCs, and to understand the material related loss mechanisms. This review paper investigates the material related topics in superconducting quantum circuits pertinent to the quantum computing application from a comprehensive perspective. The history of SQCs is briefly mentioned, followed by the peculiar characteristics as an engineerable quantum system, and a roadmap to quantum advantage and universal quantum computing in the next a few years. Technically, the superconducting quantum computer is compared to a Schrodinger’s cat, and can be boiled down into three parts, i.e., quantum chips, the environment, and the operating system, corresponding to the cat, the box, and the observer, respectively. The material related decoherence channels of the SQCs can be sorted into four categories; each will be discussed in details. To fabricate SQCs with minimal loss, the processing technologies are elaborated, including qubit design, material selection, surface treatments, film growth, and Josephson junction, etc. Though there are general guidelines that amorphous materials should be avoided and processing induced damage should be minimized, more is to be investigated due to the emerging of new materials and new fabrication methods. The last part presents the potential application of the superconducting quantum computer and its current state of play. SQC for quantum computing is a multi-discipline research topic, demanding joint efforts from different scientific and technical areas. Materials science and device processing will play important roles along the way to quantum practicality.
High-fidelity general-purpose numerical methods are increasingly needed to improve superconducting circuit quantum information processor performance. One challenge in developing such numerical methods is the lack of reference data to validate them. To address this, we have designed a 3-D system where all electromagnetic properties needed in a quantum analysis can be evaluated using analytical techniques from classical electromagnetic theory. Here, we review the basics of our field-based quantization method and then use these techniques to create the first-ever analytical quantum full-wave solution for a superconducting circuit quantum device. Specifically, we analyze a coaxial-fed 3-D waveguide cavity with and without transmon quantum bits inside the cavity. We validate our analytical solutions by comparing them to numerical methods in evaluating single-photon interference and computing key system parameters related to controlling quantum bits. In the future, our analytical solutions can be used to validate numerical methods, as well as build intuition about important quantum effects in realistic 3-D devices.
The aim of this review is to provide quantum engineers with an introductory guide to the central concepts and challenges in the rapidly accelerating field of superconducting quantum circuits. Over the past twenty years, the field has matured from a predominantly basic research endeavor to a one that increasingly explores the engineering of larger-scale superconducting quantum systems. Here, we review several foundational elements—qubit design, noise properties, qubit control, and readout techniques—developed during this period, bridging fundamental concepts in circuit quantum electrodynamics and contemporary, state-of-the-art applications in gate-model quantum computation.