Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.22894 · Optics Express

Ultra-high-rate detection of entangled photon pairs

Toshimori Honjo, Shigeyuki Miyajima, Shigehito Miki, Hirotaka Terai, Hsin-Pin Lo, Takuya Ikuta, Yuya Yonezu, Hiroki Takesue

Published May 21, 2026• 0 citations
arXivHTMLPDF

Abstract

The high-rate detection of entangled photons is essential for advancing photonic quantum information processing. Although several experimental demonstrations have been reported, the achievable coincidence rates have so far remained limited. One of the main bottlenecks arises from the dead time of single-photon detectors, which constrains coincidence detection at high photon-pair generation rates. In this work, we employ 16-pixel superconducting nanowire single-photon detectors (SNSPDs) to mitigate the impact of detector dead time. Consequently, we achieve coincidence rates exceeding 3 million counts per second (Mcps) in two-photon interference and CHSH inequality experiments using a 5-GHz clocked sequential time-bin entangled photon pair source. To the best of our knowledge, this is the first demonstration of multi-Mcps coincidence detection of entangled photons, paving the way for high-speed entangled-photon-based quantum information processing.

DOI
10.1364/oe.581847

Related papers

Coincidence studies of entangled photon pairs using nanowire detection and high-resolution time tagging for QKD application

Evan J. Katz, Roger P. Tokars, Ian R. Nemitz +9 more

Entangled photon pairs are created by a system consisting of a 1064 nm pump diode laser that is fiber coupled to a high generation rate photon pair source. The source is a dual element periodically poled potassium titanyl phosphate (KTP) waveguide that up-converts 1064 nm photons to single 532 nm photons in the first stage. In the second stage, the green photons are down converted to energy entangled photon pairs at 800 nm and 1600 nm. The output photon pairs are guided by fiber to sorting optics where they are separated and sent into high-efficiency photon detectors. In particular, the 1600 nm photons are detected by a superconducting nanowire with efficiency over 60% and dead time less than 50 ns. Detector output electrical signals are sent to a time tagger with bin resolution as narrow as 25 ps for coincidence counting. The ultimate goal of this setup is to demonstrate a singlesource, high efficiency, high data rate, quantum communication system to enable Earth-space quantum networks. Of particular interest is a source of entangled photons that is amenable to utilization in aircraft and spacecraft under rigorous flight and environmental conditions. Test results that characterize the entangled photon pair creation and detection capabilities of our system will be presented.

Broadband Access Communication Technologies•Jan 29, 2018•2 citations

High-speed and high-efficiency superconducting nanowire single photon detector array

Danna Rosenberg, Andrew J. Kerman, R. J. Molnar +1 more

Superconducting nanowire single photon detectors (SNSPDs) have separately demonstrated high efficiency, low noise, and extremely high speed when detecting single photons. However, achieving all of these simultaneously has been limited by detector subtleties and tradeoffs. Here, we report an SNSPD system with <80 ps timing resolution, kHz noise count rates, and 76% fiber-coupled system detection efficiency in the low-flux limit at 1550 nm. We present a model for determining the detection efficiency penalty due to the detection recovery time, and we validate our method using experimental data obtained at high count rates. We demonstrate improved performance tradeoffs, such as 68% system detection efficiency, including losses due to detector recovery time, when coupled to a Poisson source emitting 100 million photons per second. Our system can provide limited photon number resolution, continuous cryogen-free operation, and scalability to future imaging and GHz-count-rate applications.

Optics Express•Jan 14, 2013•191 citations

Ultra-high-rate nonclassical light source with 50 GHz-repetition-rate mode-locked pump pulses and multiplexed single-photon detectors

Kentaro Wakui, Yoshiaki Tsujimoto, Mikio Fujiwara +8 more

Heralded single photons (HSPs) and entangled photon pairs (EPPs) via spontaneous parametric down-conversion are essential tools for the development of photonic quantum information technologies. In this paper, we report a novel ultra-high-rate nonclassical light source realized by developing 50 GHz-repetition-rate mode-locked pump pulses and multiplexed superconducting nanowire single-photon detectors. The presence of the single-photon state in the heralded photons with our setup was indicated by the second-order intensity correlation below 1/2 at the heralding rate over 20 Mcps. Even at the rate beyond 50 Mcps, the nonclassicality was still observed with the intensity correlation below unity. Moreover, our setup is also applicable to the polarization-EPP experiment, where we obtained the maximum coincidence rate of 1.6 Mcps with the fidelity of 0.881 ± (0.254 × 10−3) to the maximally entangled state. Our versatile source could be a promising tool to explore various large-scale quantum-photonic experiments with low success probability and heavy attenuation.

Optics Express•Jul 7, 2020•17 citations

Broadband waveguide-integrated superconducting single-photon detectors with high system detection efficiency

Martin A. Wolff, Fabian Beutel, Jonas Schütte +4 more

Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.

Applied Physics Letters•Apr 12, 2021•43 citations

Superconducting detectors for next-generation quantum networking

Martin J. Stevens, Juliet T. Gopinath, Gautam A. Kavuri +3 more

Superconducting Nanowire-Single Photon Detectors (SNSPDs) have emerged as the highest-performing single-photon detectors, with detection efficiencies reaching 98%, maximum count rates over 1 Gcount/s, and the ability to distinguish between single-photon and multi-photon events. SNSPDs have enabled our group to demonstrate loophole-free tests of Bell’s inequality and device-independent randomness expansion. In this talk I will discuss a new scheme using SNSPDs for high-rate, high-fidelity entanglement distribution between remote nodes of a quantum network. The scheme uses a high-quality heralded entangled source and all-optical quantum repeaters. I will discuss requirements for the SNSPDs and strategies for achieving interferometric stability across the network. Both will be crucial for achieving high-fidelity entanglement distribution at high rates.

Quantum Computing, Communication, and Simulation•Mar 13, 2024•0 citations

Characterisation of multi-pixel superconducting nanowire single photon detectors

Jeroen Swens

Single-photon detection is extremely important for a number of different applications such as quantum cryptography, CMOS testing and even biomedical research. Most of the applications of single-photon detector require high efficiency combined with high time resolution, high count rates and low dark counts. Superconducting nanowire single-photon detectors has emerged provides this combination unlike any other available single-photon detectors. Some of the applications of superconducting nanowire single-photon detectors (SNSPD's) require larger area SNSPD's without affecting it's performance. For this purpose, multi-pixel SNSPD's would provide a solution. To this end, prototype 4- and 16-pixel detectors have been characterised in terms of a number of performance parameters such as critical current, count rate behaviour and timing jitter. Aside from this, simulations have been performed on detection statistics and relative illumination of the individual pixels of a multi-pixel SNSPD. Results show that for 4-pixel detectors, all desired aspects have been achieved, but not yet combined in one detector. The 16-pixel detectors showed excellent critical currents and count rate behaviour but, most likely due to the fact that they were prototype chips with little to no protection, had several not functioning pixels.

•Jan 1, 2018•0 citations
The high-rate detection of entangled photons is essential for advancing photonic quantum information processing. Although several experimental demonstrations have been reported, the achievable coincidence rates have so far remained limited. One of the main bottlenecks arises from the dead time of single-photon detectors, which constrains coincidence detection at high photon-pair generation rates. In this work, we employ 16-pixel superconducting nanowire single-photon detectors (SNSPDs) to mitigate the impact of detector dead time. Consequently, we achieve coincidence rates exceeding 3 million counts per second (Mcps) in two-photon interference and CHSH inequality experiments using a 5-GHz clocked sequential time-bin entangled photon pair source. To the best of our knowledge, this is the first demonstration of multi-Mcps coincidence detection of entangled photons, paving the way for high-speed entangled-photon-based quantum information processing.
Entangled photon pairs are created by a system consisting of a 1064 nm pump diode laser that is fiber coupled to a high generation rate photon pair source. The source is a dual element periodically poled potassium titanyl phosphate (KTP) waveguide that up-converts 1064 nm photons to single 532 nm photons in the first stage. In the second stage, the green photons are down converted to energy entangled photon pairs at 800 nm and 1600 nm. The output photon pairs are guided by fiber to sorting optics where they are separated and sent into high-efficiency photon detectors. In particular, the 1600 nm photons are detected by a superconducting nanowire with efficiency over 60% and dead time less than 50 ns. Detector output electrical signals are sent to a time tagger with bin resolution as narrow as 25 ps for coincidence counting. The ultimate goal of this setup is to demonstrate a singlesource, high efficiency, high data rate, quantum communication system to enable Earth-space quantum networks. Of particular interest is a source of entangled photons that is amenable to utilization in aircraft and spacecraft under rigorous flight and environmental conditions. Test results that characterize the entangled photon pair creation and detection capabilities of our system will be presented.
Superconducting nanowire single photon detectors (SNSPDs) have separately demonstrated high efficiency, low noise, and extremely high speed when detecting single photons. However, achieving all of these simultaneously has been limited by detector subtleties and tradeoffs. Here, we report an SNSPD system with <80 ps timing resolution, kHz noise count rates, and 76% fiber-coupled system detection efficiency in the low-flux limit at 1550 nm. We present a model for determining the detection efficiency penalty due to the detection recovery time, and we validate our method using experimental data obtained at high count rates. We demonstrate improved performance tradeoffs, such as 68% system detection efficiency, including losses due to detector recovery time, when coupled to a Poisson source emitting 100 million photons per second. Our system can provide limited photon number resolution, continuous cryogen-free operation, and scalability to future imaging and GHz-count-rate applications.
Heralded single photons (HSPs) and entangled photon pairs (EPPs) via spontaneous parametric down-conversion are essential tools for the development of photonic quantum information technologies. In this paper, we report a novel ultra-high-rate nonclassical light source realized by developing 50 GHz-repetition-rate mode-locked pump pulses and multiplexed superconducting nanowire single-photon detectors. The presence of the single-photon state in the heralded photons with our setup was indicated by the second-order intensity correlation below 1/2 at the heralding rate over 20 Mcps. Even at the rate beyond 50 Mcps, the nonclassicality was still observed with the intensity correlation below unity. Moreover, our setup is also applicable to the polarization-EPP experiment, where we obtained the maximum coincidence rate of 1.6 Mcps with the fidelity of 0.881 ± (0.254 × 10−3) to the maximally entangled state. Our versatile source could be a promising tool to explore various large-scale quantum-photonic experiments with low success probability and heavy attenuation.
Fast and efficient detection of single photons with high timing accuracy is a crucial requirement in most quantum optics experiments and enables novel sensing and imaging solutions. Superconducting nanowire single-photon detectors (SNSPD) achieve technology-leading performance in terms of detection efficiency, dark count rate, timing jitter, and detector dead times. However, conventional SNSPDs with high system detection efficiency typically rely on resonant enhancement of the absorption efficiency, thus only achieving attractive detector benchmarks over narrow spectral windows. Waveguide-integrated SNSPDs allow for leveraging the wideband material absorption in superconducting nanowires by absorbing light in a traveling-wave geometry but have been limited to low system detection efficiencies due to interface losses when coupling to optical fibers. Here, we show how high system detection efficiencies of 22%–73% are realized over a broad wavelength range from 532 nm to 1640 nm in a single waveguide-integrated SNSPD device. We accomplish efficient coupling between optical fibers and waveguide-integrated nanowire detectors by employing a 3D interface, produced in direct laser writing, that relies on total internal reflection for achieving a broad transmission bandwidth. We further find low timing jitter of 25.7 ps and detector decay times of 9.8 ns, allowing for single-photon counting with high repetition rates up to 100 MHz. Our work paves the way for an efficient single-photon detector solution that combines the spectral requirements of an extremely wide range of quantum optics experiments in a single device. The coupling approach and SNSPD-integration with nanophotonic circuits are further well-suited for realizing large-scale detector arrays.
Superconducting Nanowire-Single Photon Detectors (SNSPDs) have emerged as the highest-performing single-photon detectors, with detection efficiencies reaching 98%, maximum count rates over 1 Gcount/s, and the ability to distinguish between single-photon and multi-photon events. SNSPDs have enabled our group to demonstrate loophole-free tests of Bell’s inequality and device-independent randomness expansion. In this talk I will discuss a new scheme using SNSPDs for high-rate, high-fidelity entanglement distribution between remote nodes of a quantum network. The scheme uses a high-quality heralded entangled source and all-optical quantum repeaters. I will discuss requirements for the SNSPDs and strategies for achieving interferometric stability across the network. Both will be crucial for achieving high-fidelity entanglement distribution at high rates.
Single-photon detection is extremely important for a number of different applications such as quantum cryptography, CMOS testing and even biomedical research. Most of the applications of single-photon detector require high efficiency combined with high time resolution, high count rates and low dark counts. Superconducting nanowire single-photon detectors has emerged provides this combination unlike any other available single-photon detectors. Some of the applications of superconducting nanowire single-photon detectors (SNSPD's) require larger area SNSPD's without affecting it's performance. For this purpose, multi-pixel SNSPD's would provide a solution. To this end, prototype 4- and 16-pixel detectors have been characterised in terms of a number of performance parameters such as critical current, count rate behaviour and timing jitter. Aside from this, simulations have been performed on detection statistics and relative illumination of the individual pixels of a multi-pixel SNSPD. Results show that for 4-pixel detectors, all desired aspects have been achieved, but not yet combined in one detector. The 16-pixel detectors showed excellent critical currents and count rate behaviour but, most likely due to the fact that they were prototype chips with little to no protection, had several not functioning pixels.