Physical qubits in a quantum computer are often represented by superposition states of single particles or excitations. Decay of the excitation itself is a fundamental error channel that is difficult to overcome via external drive or control techniques. Quantum error correcting codes, which encode information in superpositions involving multiple excitations, provide a path to preserve information beyond the capacity of individual excitations, but typically require exquisite active operations on the system. Here, we demonstrate a steady-state driven-dissipative quantum system, composed of a superconducting cavity and a transmon ancilla, that preserves a logical qubit beyond the photon-lifetime limit by about 5% using a binomial encoding. This realization of continuous quantum error correction at the breakeven point highlights the quantitative competitiveness of passive correction strategies, while circumventing some demanding hardware requirements of its active counterparts.
Physical qubits in a quantum computer are often represented by superposition states of single particles or excitations. Decay of the excitation itself is a fundamental error channel that is difficult to overcome via external drive or control techniques. Quantum error correcting codes, which encode information in superpositions involving multiple excitations, provide a path to preserve information beyond the capacity of individual excitations, but typically require exquisite active operations on the system. Here, we demonstrate a steady-state driven-dissipative quantum system, composed of a superconducting cavity and a transmon ancilla, that preserves a logical qubit beyond the photon-lifetime limit by about 5% using a binomial encoding. This realization of continuous quantum error correction at the breakeven point highlights the quantitative competitiveness of passive correction strategies, while circumventing some demanding hardware requirements of its active counterparts.
Abstract To build a universal quantum computer from fragile physical qubits, effective implementation of quantum error correction (QEC)1 is an essential requirement and a central challenge. Existing demonstrations of QEC are based on an active schedule of error-syndrome measurements and adaptive recovery operations2, 3, 4, 5, 6, 7 that are hardware intensive and prone to introducing and propagating errors. In principle, QEC can be realized autonomously and continuously by tailoring dissipation within the quantum system1, 8, 9, 10, 11, 12, 13, 14, but so far it has remained challenging to achieve the specific form of dissipation required to counter the most prominent errors in a physical platform. Here we encode a logical qubit in Schrödinger cat-like multiphoton states15 of a superconducting cavity, and demonstrate a corrective dissipation process that stabilizes an error-syndrome operator: the photon number parity. Implemented with continuous-wave control fields only, this passive protocol protects the quantum information by autonomously correcting single-photon-loss errors and boosts the coherence time of the bosonic qubit by over a factor of two. Notably, QEC is realized in a modest hardware setup with neither high-fidelity readout nor fast digital feedback, in contrast to the technological sophistication required for prior QEC demonstrations. Compatible with additional phase-stabilization and fault-tolerant techniques16, 17, 18, our experiment suggests quantum dissipation engineering as a resource-efficient alternative or supplement to active QEC in future quantum computing architectures.
Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction (AQEC) instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. We realize an AQEC scheme, implemented with only two transmon qubits in a 2D scalable architecture, that actively corrects single-photon loss and passively suppresses low-frequency dephasing using six microwave drives. Compared to uncorrected encoding, factors of 2.0, 5.1, and 1.4 improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient AQEC to enhance the reliability of a transmon-based quantum information processor.
Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. In this work, we develop a new autonomous quantum error correction scheme that actively corrects single-photon loss and passively suppresses low-frequency dephasing, and we demonstrate an important experimental step towards its full implementation with transmons. Compared to uncorrected encoding, improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient autonomous quantum error correction to enhance the reliability of a transmon-based quantum information processor.
The realization of fault-tolerant quantum computation hinges critically on the ability to protect quantum information from environmental noise and operational imperfections. This paper presents an experimental demonstration of a logical qubit that exhibits suppressed data errors, robustly outperforming its constituent physical qubits and surpassing the crucial quantum error correction break-even point. We employed a novel superconducting circuit architecture based on a binomial encoding within a microwave cavity, coupled to an ancillary transmon qubit for real-time error detection and correction. Through precise control and rapid feedback mechanisms, we achieved a logical qubit lifetime significantly extended beyond the coherence limits of its individual physical components. The results show a quantifiable reduction in logical error rates, demonstrating the viability of active quantum error correction protocols to create more stable and reliable quantum information carriers. This work represents a significant step towards scalable quantum computing, establishing a foundation for building larger and more complex fault-tolerant quantum processors.
Quantum error correction using erasure qubits offers higher fault-tolerant thresholds and improved scaling by converting dominant physical errors into detectable erasures. In superconducting circuits, erasure qubits can be constructed using the dual-rail approach, which, however, requires additional qubit-count overhead and tailored coupling elements. Here, we demonstrate a hardware-efficient scheme that operates transmon qutrits as erasure qubits, which is compatible with standard superconducting circuit-QED hardware. The logical states ∣0L⟩ and ∣1L⟩ are represented by the ground and second excited states, while the dominant relaxation errors can be detected via an ancilla qubit using a microwave-activated two-qutrit SWAP gate. We demonstrate a logical qubit T1 lifetime exceeding 500μs, post-selected with repeated mid-circuit erasure detection, which is ten times longer than the T1 time of the transmon physical qubit. Coherence times beyond 300μs are achieved using dynamical decoupling. Single-qubit gate operations reach average Clifford gate infidelity on the order of 10−4. We further demonstrate dual-purposing an ancilla qubit for both erasure detection and parity checking, showing heralded generation of Bell states between erasure qubits. These results suggest that mainstream architectures of transmon qubit arrays may already be capable of implementing erasure-based QEC strategies for hardware-efficient fault-tolerant quantum computing.
Abstract Quantum error correction (QEC) aims to protect logical qubits from noises by using the redundancy of a large Hilbert space, which allows errors to be detected and corrected in real time 1 . In most QEC codes 2–8 , a logical qubit is encoded in some discrete variables, for example photon numbers, so that the encoded quantum information can be unambiguously extracted after processing. Over the past decade, repetitive QEC has been demonstrated with various discrete-variable-encoded scenarios 9–17 . However, extending the lifetimes of thus-encoded logical qubits beyond the best available physical qubit still remains elusive, which represents a break-even point for judging the practical usefulness of QEC. Here we demonstrate a QEC procedure in a circuit quantum electrodynamics architecture 18 , where the logical qubit is binomially encoded in photon-number states of a microwave cavity 8 , dispersively coupled to an auxiliary superconducting qubit. By applying a pulse featuring a tailored frequency comb to the auxiliary qubit, we can repetitively extract the error syndrome with high fidelity and perform error correction with feedback control accordingly, thereby exceeding the break-even point by about 16% lifetime enhancement. Our work illustrates the potential of hardware-efficient discrete-variable encodings for fault-tolerant quantum computation 19 .