Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction (AQEC) instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. We realize an AQEC scheme, implemented with only two transmon qubits in a 2D scalable architecture, that actively corrects single-photon loss and passively suppresses low-frequency dephasing using six microwave drives. Compared to uncorrected encoding, factors of 2.0, 5.1, and 1.4 improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient AQEC to enhance the reliability of a transmon-based quantum information processor.
Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction (AQEC) instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. We realize an AQEC scheme, implemented with only two transmon qubits in a 2D scalable architecture, that actively corrects single-photon loss and passively suppresses low-frequency dephasing using six microwave drives. Compared to uncorrected encoding, factors of 2.0, 5.1, and 1.4 improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient AQEC to enhance the reliability of a transmon-based quantum information processor.
Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. In this work, we develop a new autonomous quantum error correction scheme that actively corrects single-photon loss and passively suppresses low-frequency dephasing, and we demonstrate an important experimental step towards its full implementation with transmons. Compared to uncorrected encoding, improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient autonomous quantum error correction to enhance the reliability of a transmon-based quantum information processor.
Large-scale quantum computers will inevitably need quantum error correction (QEC) to protect information against decoherence. Given that the overhead of such error correction is often formidable, autonomous quantum error correction (AQEC) proposals offer a promising near-term alternative. AQEC schemes work by transforming error states into excitations that can be efficiently removed through engineered dissipation. The recently proposed AQEC scheme by Li et al., called the Star code, can autonomously correct or suppress all single qubit error channels using two transmons as encoders with a tunable coupler and two lossy resonators as a cooling source. The Star code requires only two-photon interactions and can be realized with linear coupling elements, avoiding experimentally challenging higher-order terms needed in many other AQEC proposals, but needs carefully selected parameters to achieve quadratic improvements in logical states' lifetimes. Here, we theoretically and numerically demonstrate the optimal parameter choices in the Star Code. We further discuss adapting the Star code to other planar superconducting circuits, which offers a scalable alternative to single qubits for incorporation in larger quantum computers or error correction codes.
Abstract To build a universal quantum computer from fragile physical qubits, effective implementation of quantum error correction (QEC)1 is an essential requirement and a central challenge. Existing demonstrations of QEC are based on an active schedule of error-syndrome measurements and adaptive recovery operations2, 3, 4, 5, 6, 7 that are hardware intensive and prone to introducing and propagating errors. In principle, QEC can be realized autonomously and continuously by tailoring dissipation within the quantum system1, 8, 9, 10, 11, 12, 13, 14, but so far it has remained challenging to achieve the specific form of dissipation required to counter the most prominent errors in a physical platform. Here we encode a logical qubit in Schrödinger cat-like multiphoton states15 of a superconducting cavity, and demonstrate a corrective dissipation process that stabilizes an error-syndrome operator: the photon number parity. Implemented with continuous-wave control fields only, this passive protocol protects the quantum information by autonomously correcting single-photon-loss errors and boosts the coherence time of the bosonic qubit by over a factor of two. Notably, QEC is realized in a modest hardware setup with neither high-fidelity readout nor fast digital feedback, in contrast to the technological sophistication required for prior QEC demonstrations. Compatible with additional phase-stabilization and fault-tolerant techniques16, 17, 18, our experiment suggests quantum dissipation engineering as a resource-efficient alternative or supplement to active QEC in future quantum computing architectures.
The interaction between a qubit and its environment can be engineered such that one error channel dominates over all others, resulting in noise bias. This property enables error correction codes to focus on the dominant error type, thereby significantly reducing the number of physical systems required for fault-tolerant quantum computation. However, engineering noise bias typically introduces complexity at the physical system level, which decreases its usefulness by limiting scalability. Here, we introduce and experimentally realize a noise-biased qubit in a standard transmon-readout resonator circuit, one of the most common superconducting architectures, by only adding a single microwave tone. We encode the qubit in the transmon ∣g⟩- and ∣f⟩-states, and engineer a frequency-selective gain channel that counteracts single-photon loss errors between the computational states. We demonstrate an order-of-magnitude enhancement in relaxation time compared to the ∣g⟩−∣e⟩ encoding, conceding only a factor-of-two decrease in the echo-coherence time. Furthermore, we show that this qubit is compatible with fast, high-fidelity operations. Our results open a path towards using this system as a simple building-block for hardware-efficient quantum error detection and correction schemes.
Large-scale quantum computers will inevitably need quantum error correction (QEC) to protect information against decoherence. Given that the overhead of such error correction is often formidable, autonomous quantum error correction (AQEC) proposals offer a promising near-term alternative. AQEC schemes work by transforming error states into excitations that can be efficiently removed through engineered dissipation. The recently proposed AQEC scheme by Li , called the Star code, can autonomously correct or suppress all single qubit error channels using two transmons as encoders with a tunable coupler and two lossy resonators as a cooling source. The Star code requires only two-photon interactions and can be realized with linear coupling elements, avoiding experimentally challenging higher-order terms needed in many other AQEC proposals, but needs carefully selected parameters to achieve quadratic improvements in logical states' lifetimes. Here, we theoretically and numerically demonstrate the optimal parameter choices in the Star code. We further discuss adapting the Star code to other planar superconducting circuits, which offers a scalable alternative to single qubits for incorporation in larger quantum computers or error correction codes. Published by the American Physical Society 2024
Noise and errors are inevitable parts of any practical implementation of a quantum computer. As a result, large-scale quantum computation will require ways to detect and correct errors in quantum information. Here we present such a quantum error-correcting scheme for correcting the dominant phase and decay errors in superconducting qubit architectures using a hybrid approach combining autonomous correction based on engineered dissipation with traditional measurement-based quantum error correction. Using numerical simulations with realistic device parameters for superconducting circuits, we show that this scheme can achieve a five- to tenfold increase in storage time while using only six qubits for the encoding and two ancillary qubits for the operation of the autonomous correction, providing a potentially large reduction of qubit overhead compared to typical measurement-based error-correction schemes. Furthermore, the scheme relies on standard interactions and qubit driving available in most major quantum computing platforms, making it implementable in a wide range of architectures.